From: Sascha Hauer <sha@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 09/10] net: lib: add ether_addr_inc() helper
Date: Wed, 4 Oct 2023 08:41:56 +0200 [thread overview]
Message-ID: <20231004064156.GG637806@pengutronix.de> (raw)
In-Reply-To: <20231002101654.2373000-10-o.rempel@pengutronix.de>
On Mon, Oct 02, 2023 at 12:16:53PM +0200, Oleksij Rempel wrote:
> Add helper function to calculate Ethernet address by incriminating it.
> This helper can be used for multiport devices like switches to generate
> address for each port based on one stored address.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> include/net.h | 1 +
> net/lib.c | 25 +++++++++++++++++++++++++
> 2 files changed, 26 insertions(+)
>
> diff --git a/include/net.h b/include/net.h
> index a0ef8bee04..fe82451cc9 100644
> --- a/include/net.h
> +++ b/include/net.h
> @@ -360,6 +360,7 @@ int setenv_ip(const char *name, IPaddr_t ip);
>
> int string_to_ethaddr(const char *str, u8 enetaddr[6]);
> void ethaddr_to_string(const u8 enetaddr[6], char *str);
> +void ether_addr_inc(u8 *dst_addr, const u8 *src_addr, u32 increment);
>
> #ifdef CONFIG_NET_RESOLV
> int resolv(const char *host, IPaddr_t *ip);
> diff --git a/net/lib.c b/net/lib.c
> index d4536441bd..dc7d83bc6d 100644
> --- a/net/lib.c
> +++ b/net/lib.c
> @@ -44,6 +44,31 @@ void ethaddr_to_string(const u8 enetaddr[ETH_ALEN], char *str)
> enetaddr[4], enetaddr[5]);
> }
>
> +/**
> + * ether_addr_inc - Increment an Ethernet address.
> + * @dst_addr: Destination address to store the incremented address.
> + * @src_addr: Source address to be incremented.
> + * @increment: Value by which to increment the source address.
> + *
> + * This function increments the given source Ethernet address by
> + * the specified increment value, storing the result in the
> + * destination address.
> + */
> +void ether_addr_inc(u8 *dst_addr, const u8 *src_addr, u32 increment)
> +{
> + u32 value;
> + int i;
> +
> + for(i = 0; i < 6; ++i)
> + dst_addr[i] = src_addr[i];
> +
> + for(i = 5; i >= 0 && increment; --i) {
> + value = dst_addr[i] + increment;
> + dst_addr[i] = value & 0xFF;
> + increment = value >> 8;
> + }
> +}
The Kernel already has eth_addr_add() and more helpers. How about
adopting these instead?
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-10-04 7:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-02 10:16 [PATCH v2 00/10] SKOV maintenance Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 01/10] arm: dts: imx8mp-skov: Add reserved-memory for ramoops pstore Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 02/10] arm: dts: imx8mp-skov: Add pins for hardware variant detection Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 03/10] arm: dts: imx8mp-skov: Switch to GPT for eMMC partitioning Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 04/10] arm: dts: imx8mp-skov: Switch to GPT for SD partitioning Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 05/10] arm: dts: imx8mp-skov: Add barebox state backend in DTS Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 06/10] ARM: i.MX8MP: skov: refactor bootsource and BBU handlers Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 07/10] ARM: i.MX8MP: skov: Add hardware variant support Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 08/10] ARM: i.MX8MP: skov: fixup skov,imx8mp-board-version DT property for the kernel Oleksij Rempel
2023-10-02 10:16 ` [PATCH v2 09/10] net: lib: add ether_addr_inc() helper Oleksij Rempel
2023-10-04 6:41 ` Sascha Hauer [this message]
2023-10-05 6:48 ` Ahmad Fatoum
2023-10-05 7:07 ` Oleksij Rempel
2023-10-06 11:44 ` Sascha Hauer
2023-10-02 10:16 ` [PATCH v2 10/10] ARM: i.MX8MP: skov: assign Ethernet addresses to all ports Oleksij Rempel
2023-10-05 6:52 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231004064156.GG637806@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox