From: Marco Felsch <m.felsch@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] fixup! i.MX: HABv4: fix i.MX8MQ device lockdown
Date: Wed, 11 Oct 2023 07:00:21 +0200 [thread overview]
Message-ID: <20231011050021.avz2ebmfnlpowog5@pengutronix.de> (raw)
In-Reply-To: <20231010183541.1907425-1-a.fatoum@pengutronix.de>
Hi Ahmad,
On 23-10-10, Ahmad Fatoum wrote:
> Fixed up patch splits imx_hab_lockdown_device_ocotp into two
> functions, one i.MX6- and another i.MX8M-specific, because they differ
> in the fuse written: OCOTP_SEC_CONFIG_1 vs MX8M_OCOTP_SEC_CONFIG_1.
>
> The same OCOTP_SEC_CONFIG_1 fuse is also read in
> imx_hab_device_locked_down_ocotp, so split that two into imx6 and imx8m
> variants.
good catch thanks a lot.
Regards,
Marco
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/hab/hab.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hab/hab.c b/drivers/hab/hab.c
> index 444472511771..1edc495aee94 100644
> --- a/drivers/hab/hab.c
> +++ b/drivers/hab/hab.c
> @@ -176,7 +176,7 @@ static int imx8m_hab_lockdown_device_ocotp(void)
> return imx_ocotp_write_field(MX8MQ_OCOTP_DIR_BT_DIS, 1);
> }
>
> -static int imx_hab_device_locked_down_ocotp(void)
> +static int imx6_hab_device_locked_down_ocotp(void)
> {
> int ret;
> unsigned int v;
> @@ -188,6 +188,18 @@ static int imx_hab_device_locked_down_ocotp(void)
> return v;
> }
>
> +static int imx8m_hab_device_locked_down_ocotp(void)
> +{
> + int ret;
> + unsigned int v;
> +
> + ret = imx_ocotp_read_field(MX8M_OCOTP_SEC_CONFIG_1, &v);
> + if (ret < 0)
> + return ret;
> +
> + return v;
> +}
> +
> struct imx_hab_ops {
> int (*write_srk_hash)(const u8 *srk, unsigned flags);
> int (*read_srk_hash)(u8 *srk);
> @@ -208,7 +220,7 @@ static struct imx_hab_ops imx6_hab_ops_ocotp = {
> .write_srk_hash = imx_hab_write_srk_hash_ocotp,
> .read_srk_hash = imx_hab_read_srk_hash_ocotp,
> .lockdown_device = imx6_hab_lockdown_device_ocotp,
> - .device_locked_down = imx_hab_device_locked_down_ocotp,
> + .device_locked_down = imx6_hab_device_locked_down_ocotp,
> .permanent_write_enable = imx_hab_permanent_write_enable_ocotp,
> };
>
> @@ -216,7 +228,7 @@ static struct imx_hab_ops imx8m_hab_ops_ocotp = {
> .write_srk_hash = imx_hab_write_srk_hash_ocotp,
> .read_srk_hash = imx_hab_read_srk_hash_ocotp,
> .lockdown_device = imx8m_hab_lockdown_device_ocotp,
> - .device_locked_down = imx_hab_device_locked_down_ocotp,
> + .device_locked_down = imx8m_hab_device_locked_down_ocotp,
> .permanent_write_enable = imx_hab_permanent_write_enable_ocotp,
> };
>
> --
> 2.39.2
>
>
next prev parent reply other threads:[~2023-10-11 5:02 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-10 14:32 [PATCH 00/26] i.MX8M HAB Fixes Marco Felsch
2023-10-10 14:32 ` [PATCH 01/26] kbuild: clean start*_*.{p,ps}imximg files Marco Felsch
2023-10-10 14:32 ` [PATCH 02/26] i.MX: HABv4: fix event status comparison Marco Felsch
2023-10-10 14:32 ` [PATCH 03/26] i.MX: HABv4: fix i.MX8MQ device lockdown Marco Felsch
2023-10-10 18:35 ` [PATCH] fixup! " Ahmad Fatoum
2023-10-11 5:00 ` Marco Felsch [this message]
2023-10-10 14:32 ` [PATCH 04/26] i.MX: HAB: remove unused init() hook Marco Felsch
2023-10-10 14:32 ` [PATCH 05/26] i.MX: HABv4: extend support to i.MX8M SoCs Marco Felsch
2023-10-10 14:32 ` [PATCH 06/26] i.MX: HABv4: retrieve HAB ROM version for i.MX8M Marco Felsch
2023-10-10 14:32 ` [PATCH 07/26] ARM: i.MX: allow HAB for i.MX8M family Marco Felsch
2023-10-10 14:32 ` [PATCH 08/26] ARM: i.MX: introduce build_imx8m_habv4img Marco Felsch
2023-10-10 14:32 ` [PATCH 09/26] ARM: i.MX: convert i.MX8M to helper Marco Felsch
2023-10-10 14:32 ` [PATCH 10/26] ARM: boards: i.MX8M: add HAB image support Marco Felsch
2023-10-10 14:32 ` [PATCH 11/26] ARM: i.MX8M: add flexspi-imx8m{m,p}-cfg.h header Marco Felsch
2023-10-13 6:27 ` Sascha Hauer
2023-10-16 5:44 ` Marco Felsch
2023-10-10 14:33 ` [PATCH 12/26] ARM: boards: i.MX8M: make use of new " Marco Felsch
2023-10-10 14:33 ` [PATCH 13/26] ARM: lds: introduce HAB_CSF_LEN define for the hab_csf section Marco Felsch
2023-10-10 14:33 ` [PATCH 14/26] ARM: lds: add support for a 2nd CSF area Marco Felsch
2023-10-13 6:37 ` Sascha Hauer
2023-10-16 5:45 ` Marco Felsch
2023-10-10 14:33 ` [PATCH 15/26] scripts: imx: force flexspi and hab option order Marco Felsch
2023-10-10 14:33 ` [PATCH 16/26] scripts: imx: move flexspi_image() into header Marco Felsch
2023-10-10 14:33 ` [PATCH 17/26] scripts: imx: fix i.MX8M CSF header placement Marco Felsch
2023-10-10 14:33 ` [PATCH 18/26] scripts: imx: add imx8m_get_offset_size helper Marco Felsch
2023-10-10 14:33 ` [PATCH 19/26] scripts: imx-image: header_v2: add CSF slots Marco Felsch
2023-10-10 14:33 ` [PATCH 20/26] scripts: imx-image: hab_sign: refactor function Marco Felsch
2023-10-10 14:33 ` [PATCH 21/26] scripts: imx: add helper to write CSF Blocks command Marco Felsch
2023-10-13 7:28 ` Sascha Hauer
2023-10-16 5:50 ` Marco Felsch
2023-10-16 7:44 ` Marco Felsch
2023-10-16 8:19 ` Sascha Hauer
2023-10-17 14:58 ` Marco Felsch
2023-10-10 14:33 ` [PATCH 22/26] scripts: imx: fix HAB for FlexSPI boot Marco Felsch
2023-10-10 14:33 ` [PATCH 23/26] scripts: imx-image: add missing close() Marco Felsch
2023-10-10 14:33 ` [PATCH 24/26] scripts: imx-image: add support for CST_EXTRA_CMDLINE_OPTIONS Marco Felsch
2023-10-10 14:33 ` [PATCH 25/26] Documentation: boards: imx: replace i.MX8MQ with i.MX8M Marco Felsch
2023-10-10 14:33 ` [PATCH 26/26] Documentation: boards: imx: add FlexSPI sub-section Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231011050021.avz2ebmfnlpowog5@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox