Re: [PATCH 00/22] Add initial Texas Instruments K3 support

[Sascha Hauer <s.hauer@pengutronix.de>]

On Thu, Nov 02, 2023 at 03:12:25PM +0100, Ahmad Fatoum wrote:
> Hello Sascha,
> 
> On 03.08.23 12:49, Sascha Hauer wrote:
> > This series adds initial basic support for the TI K3 Architecture.
> > Currently only the AM62x is supported and within there the BeaglePlay
> > board (https://www.beagleboard.org/boards/beagleplay).
> > 
> > The current support is enough for bringing up barebox 2nd stage after
> > U-Boot has initialized the SoC. The SoC boots from a FAT partition on
> > SD/eMMC, the u-boot.img therein can be replaced with a barebox image.
> > 
> > The SoC has a core dedicated to handle clocks, power domains and other
> > stuff. Communication to this core is done with a mailbox interface and
> > this series contains patches to implement that interface based on that
> > a clk driver and a power domain driver.
> > 
> > So far only SD/eMMC is working, so there's plenty of room to add further
> > support for networking, USB, SPI and I2C. It's a start.
> 
> let's merge this?

OMG, I completely forgot about this. Just merged it.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |