* LS1046A PCIE @ 2023-11-07 19:23 Renaud Barbier 2023-11-09 6:49 ` Sascha Hauer 0 siblings, 1 reply; 2+ messages in thread From: Renaud Barbier @ 2023-11-07 19:23 UTC (permalink / raw) To: Barebox List I noticed in U-boot the code in https://github.com/u-boot/u-boot/blob/master/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c There is a function setup_serdes_volt to set up the serdes which I do not see in Barebox. Why was this not implemented? Are the RCW enough that the code is not needed. Cheers, Renaud ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: LS1046A PCIE 2023-11-07 19:23 LS1046A PCIE Renaud Barbier @ 2023-11-09 6:49 ` Sascha Hauer 0 siblings, 0 replies; 2+ messages in thread From: Sascha Hauer @ 2023-11-09 6:49 UTC (permalink / raw) To: Renaud Barbier; +Cc: Barebox List Hi Renaud, On Tue, Nov 07, 2023 at 07:23:09PM +0000, Renaud Barbier wrote: > I noticed in U-boot the code in https://github.com/u-boot/u-boot/blob/master/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c > There is a function setup_serdes_volt to set up the serdes which I do not see in Barebox. > Why was this not implemented? > Are the RCW enough that the code is not needed. I looked at the code, but it doesn't ring a bell with me. I faintly remember that this code exists, but that's all Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-11-09 6:50 UTC | newest] Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-11-07 19:23 LS1046A PCIE Renaud Barbier 2023-11-09 6:49 ` Sascha Hauer
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox