mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 1/2] console: provide best-effort clk_get_for_console helper
Date: Thu, 23 Nov 2023 08:22:14 +0100	[thread overview]
Message-ID: <20231123072214.GE3359458@pengutronix.de> (raw)
In-Reply-To: <20231122171320.1714868-1-a.fatoum@pengutronix.de>

On Wed, Nov 22, 2023 at 06:13:19PM +0100, Ahmad Fatoum wrote:
> From: Ahmad Fatoum <ahmad@a3f.at>
> 
> clk_get will return -EPROBE_DEFER if clock provider hasn't yet been
> probed. In a system with deep probe enabled, dependencies are probed
> on demand, so a -EPROBE_DEFER return is final and the console probe
> will never succeed.
> 
> CONFIG_DEBUG_LL is often used to debug this, but because the low-level
> console is not interactive, it's a bit cumbersome. Improve upon this a
> bit, by providing a clk_get_for_console helper that returns NULL if and
> only if we are sure that a clock provider will not be probed.
> 
> In that case, the driver can skip code paths initialization code and
> baud rate setting dependent on having access to the clock and still
> register a console that reuses what was set up by CONFIG_DEBUG_LL.
> 
> Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
> ---
> v1 -> v2:
>   - restrict new mechanism to stdout console (Sascha)
> ---
>  include/console.h   | 27 +++++++++++++++++++++++++++
>  include/linux/clk.h | 21 +++++++++++++++++++++
>  2 files changed, 48 insertions(+)

Applied, thanks

Sascha

> 
> diff --git a/include/console.h b/include/console.h
> index d7cbdfa99207..69c0ec144b31 100644
> --- a/include/console.h
> +++ b/include/console.h
> @@ -8,6 +8,7 @@
>  #define _CONSOLE_H_
>  
>  #include <param.h>
> +#include <linux/clk.h>
>  #include <linux/list.h>
>  #include <driver.h>
>  #include <serdev.h>
> @@ -228,4 +229,30 @@ static inline void console_ctrlc_allow(void) { }
>  static inline void console_ctrlc_forbid(void) { }
>  #endif
>  
> +/**
> + * clk_get_for_console - get clock, ignoring known unavailable clock controller
> + * @dev: device for clock "consumer"
> + * @id: clock consumer ID
> + *
> + * Return: a struct clk corresponding to the clock producer, a
> + * valid IS_ERR() condition containing errno or NULL if it could
> + * be determined that the clock producer will never be probed in
> + * absence of modules. The NULL return allows serial drivers to
> + * skip clock handling for the stdout console and rely on CONFIG_DEBUG_LL.
> + */
> +static inline struct clk *clk_get_for_console(struct device *dev, const char *id)
> +{
> +	__always_unused unsigned baudrate;
> +	struct clk *clk;
> +
> +	if (!IS_ENABLED(CONFIG_DEBUG_LL) || !of_device_is_stdout_path(dev, &baudrate))
> +		return clk_get(dev, id);
> +
> +	clk = clk_get_if_available(dev, id);
> +	if (clk == NULL)
> +		dev_warn(dev, "couldn't get clock (ignoring)\n");
> +
> +	return clk;
> +}
> +
>  #endif
> diff --git a/include/linux/clk.h b/include/linux/clk.h
> index 61b4ff3127cf..f505f18a75c0 100644
> --- a/include/linux/clk.h
> +++ b/include/linux/clk.h
> @@ -14,6 +14,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/stringify.h>
>  #include <linux/container_of.h>
> +#include <deep-probe.h>
>  #include <xfuncs.h>
>  
>  struct device;
> @@ -982,4 +983,24 @@ static inline struct clk *clk_get_enabled(struct device *dev, const char *id)
>  	return clk;
>  }
>  
> +/**
> + * clk_get_if_available - get clock, ignoring known unavailable clock controller
> + * @dev: device for clock "consumer"
> + * @id: clock consumer ID
> + *
> + * Return: a struct clk corresponding to the clock producer, a
> + * valid IS_ERR() condition containing errno or NULL if it could
> + * be determined that the clock producer will never be probed in
> + * absence of modules.
> + */
> +static inline struct clk *clk_get_if_available(struct device *dev, const char *id)
> +{
> +	struct clk *clk = clk_get(dev, id);
> +
> +	if (clk == ERR_PTR(-EPROBE_DEFER) && deep_probe_is_supported())
> +		return NULL;
> +
> +	return clk;
> +}
> +
>  #endif
> -- 
> 2.39.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



      parent reply	other threads:[~2023-11-23  7:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-22 17:13 Ahmad Fatoum
2023-11-22 17:13 ` [PATCH v2 2/2] serial: stm32: support probing with missing clock provider Ahmad Fatoum
2023-11-23  7:22 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231123072214.GE3359458@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox