From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Mon, 27 Nov 2023 22:50:34 +0100 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1r7jUv-00BOYe-2S for lore@lore.pengutronix.de; Mon, 27 Nov 2023 22:50:34 +0100 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1r7jUs-0003Lt-RD for lore@pengutronix.de; Mon, 27 Nov 2023 22:50:34 +0100 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=DHNh0R1x3fEwURMqxZN0Td0czlXGHRfyM5nmO/tLAp4=; b=MgQDKPomn1v55R06ZrcTrw6N+B 3zXJYowsLZGQuHwe9mt/CdoJMM9RtsB+8xNL0eQh8T/jZivAZIxfbVGVogSpYq5vyQC+PvlaO9Iha oXURNv2Vciy2pJ/yqmCW0CYUfmpt+nVETIeaxnWOvPgA5WZJNpuuLbji3tZ2MbEep4A8K0iOFYmmq a7s6VaKZiIHGGUegWLRv9McVRNJhdLucFWsYa38pvOuWG4iF0gr2IUddl/NgdhJC0+4mtXTqK/j/b VdfA3MmUfiGs+hrcbBmJnM68RPoHL1h9FtEVDtF0zggofOgcaL/sOOkmtBw5MhUfZE6WRqSrtDmGL dB8JROzA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1r7jT0-003WsH-0i; Mon, 27 Nov 2023 21:48:34 +0000 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1r7jSq-003Wqm-2J for barebox@lists.infradead.org; Mon, 27 Nov 2023 21:48:30 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1r7jSn-0002qT-Vn; Mon, 27 Nov 2023 22:48:22 +0100 Received: from [2a0a:edc0:0:1101:1d::ac] (helo=dude04.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1r7jSn-00C1vl-Iv; Mon, 27 Nov 2023 22:48:21 +0100 Received: from rhi by dude04.red.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1r7jSn-00Fk6Y-1k; Mon, 27 Nov 2023 22:48:21 +0100 From: Roland Hieber To: barebox@lists.infradead.org Cc: Roland Hieber Date: Mon, 27 Nov 2023 22:48:17 +0100 Message-Id: <20231127214818.3751722-2-rhi@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20231127214818.3751722-1-rhi@pengutronix.de> References: <20231127214818.3751722-1-rhi@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20231127_134825_255977_9A669709 X-CRM114-Status: GOOD ( 14.42 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.whiteo.stw.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-4.9 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,SPF_HELO_NONE,SPF_NONE, T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: [PATCH 2/3] ARM: i.MX7: Import GoMe device trees from kernel X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.whiteo.stw.pengutronix.de) The kernel device tree for the VAR-SOM-MX7 System-on-Module and the Gossen Metrawatt Profitest MF (e143_01) have been submitted upstream: http://lore.kernel.org/r/20231127-b4-imx7-var-som-gome-v1-0-f26f88f2d0bc@pengutronix.de Until the fixes are in the upstream kernel and synced to our dts/ folder, add them here so we can already use them. This also includes the dt-schema validation fixes to the upstream i.MX7 device trees mentioned in the upstream kernel series. Signed-off-by: Roland Hieber --- arch/arm/dts/imx7d-gome-e143_01.kernel.dts | 561 ++++++++ arch/arm/dts/imx7d-pinfunc.kernel.h | 8 + arch/arm/dts/imx7d-var-som-mx7.kernel.dtsi | 607 +++++++++ arch/arm/dts/imx7d.kernel.dtsi | 226 ++++ arch/arm/dts/imx7s.kernel.dtsi | 1354 ++++++++++++++++++++ 5 files changed, 2756 insertions(+) create mode 100644 arch/arm/dts/imx7d-gome-e143_01.kernel.dts create mode 100644 arch/arm/dts/imx7d-pinfunc.kernel.h create mode 100644 arch/arm/dts/imx7d-var-som-mx7.kernel.dtsi create mode 100644 arch/arm/dts/imx7d.kernel.dtsi create mode 100644 arch/arm/dts/imx7s.kernel.dtsi diff --git a/arch/arm/dts/imx7d-gome-e143_01.kernel.dts b/arch/arm/dts/imx7d-gome-e143_01.kernel.dts new file mode 100644 index 000000000000..19c7a3d4260e --- /dev/null +++ b/arch/arm/dts/imx7d-gome-e143_01.kernel.dts @@ -0,0 +1,561 @@ +// SPDX-License-Identifier: GPL-2.0-only +/** + * Copyright (C) 2022 Gossen Metrawatt GmbH + * Copyright (C) 2022 Marco Felsch, Pengutronix + * Copyright (C) 2022 Philipp Zabel, Pengutronix + * Copyright (C) 2022 Roland Hieber, Pengutronix + */ +/dts-v1/; + +#include +#include +#include +#include "imx7d-var-som-mx7.dtsi" + +/ { + model = "Gossen Metrawatt Profitest MF (e143_01)"; + compatible = "gome,e143_01", "variscite,var-som-mx7", "fsl,imx7d"; + + aliases { + gpio7 = &gpio8; + rtc0 = &rtc0; + }; + + max98357a: audio-codec { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmode>; + sdmode-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; // Pin 60 AUDIO_SHDN_B + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>, <&pinctrl_gpio_keys_2>; + autorepeat; + + button-0 { + label = "S0"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; // Pin 183 BTN_S0_ESC + linux,code = ; + wakeup-source; + }; + + button-1 { + label = "S1"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; // Pin 185 BTN_S1_MEM + linux,code = ; + wakeup-source; + }; + + button-2 { + label = "S2"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; // Pin 181 BTN_S2_HLP + linux,code = ; + wakeup-source; + }; + + button-3 { + label = "S3"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; // Pin 1 BTN_S3_STA + linux,code = ; + wakeup-source; + }; + + button-4 { + label = "S4"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; // Pin 168 BTN_S4_IDN + linux,code = ; + wakeup-source; + }; + + button-5 { + label = "S5"; + gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; // Pin 28 BTN_S5 + linux,code = ; + }; + + button-6 { + label = "S6"; + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; // Pin 40 BTN_S6 + linux,code = ; + }; + + button-7 { + label = "S7"; + gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; // Pin 38 BTN_S7 + linux,code = ; + }; + + button-8 { + label = "S8"; + gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; // Pin 36 BTN_S8 + linux,code = ; + }; + + button-9 { + label = "S9"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; // Pin 20 BTN_S9 + linux,code = ; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_poweroff>; + gpios = <&gpio7 14 GPIO_ACTIVE_LOW>; // Pin 7 POWER_OFF_B + input; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc2 0>, // ARS_VAL + <&adc2 1>, // VBAT_VAL + <&adc2 2>, // LCD_BACKLIGHT_VAL + <&adc2 3>; // VCC_5V0_FB + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_debug_led>; + + test-led-1 { + label = "test-led-1:red"; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; // Pin 44 LED_TEST1_B + color = ; + linux,default-trigger = "disk-activity"; + }; + + test-led-2 { + label = "test-led-2:red"; + gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; // Pin 46 LED_TEST2_B + color = ; + linux,default-trigger = "heartbeat"; + }; + }; + + leds2 { + compatible = "gpio-leds"; + + led_netz_gn { + label = "mains:green"; + gpios = <&gpio8 9 GPIO_ACTIVE_LOW>; // LED_NETZ_GN + color = ; + }; + + led_netz_rt { + label = "mains:red"; + gpios = <&gpio8 8 GPIO_ACTIVE_LOW>; // LED_NETZ_RT + color = ; + default-state = "on"; + }; + + led_debug_gn { + label = "debug:green"; + gpios = <&gpio8 0 GPIO_ACTIVE_LOW>; // LED_DEBUG_GN + color = ; + }; + + led_debug_rt { + label = "debug:red"; + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; // LED_DEBUG_RT + color = ; + }; + + led_ul_gn { + label = "ulrl:green"; + gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; // LED_UL_GN + color = ; + }; + + led_ul_rt { + label = "ulrl:red"; + gpios = <&gpio8 6 GPIO_ACTIVE_LOW>; // LED_UL_RT + color = ; + default-state = "on"; + }; + + led_rcd_gn { + label = "rcd:green"; + gpios = <&gpio8 3 GPIO_ACTIVE_LOW>; // LED_RCD_GN + color = ; + }; + + led_rcd_rt { + label = "rcd:red"; + gpios = <&gpio8 7 GPIO_ACTIVE_LOW>; // LED_RCD_RT + color = ; + default-state = "on"; + }; + }; + + reg_vled_backlight: regulator-vled-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_backlight>; + regulator-name = "VLED_BACKLIGHT"; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <20000000>; + regulator-max-microvolt = <20000000>; + enable-active-high; + }; + + reg_vcc_3v3_per: regulator-vcc-3v3-per { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vcc_3v3_per>; + regulator-name = "VCC_3V3_PER"; + gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; // Pin 83 VCC_3V3_PER_EN + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <30000>; + enable-active-high; + regulator-always-on; + }; + + reg_vcc_5v0_per: regulator-vcc-5v0-per { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vcc_5v0_per>; + regulator-name = "VCC_5V0_PER"; + gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; // Pin 75 VCC_5V0_PER_EN + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + }; + + reg_imt: regulator-imt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_imt>; + regulator-name = "VCC_IMT"; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; // Pin 66 MT_EN + regulator-min-microvolt = <9000000>; + regulator-max-microvolt = <9000000>; + enable-active-high; + }; + + reg_vcc_1v8_alg: regulator-vcc-1v8-alg { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_ALG"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_vcc_3v3_per>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "max98357aaudio"; + /delete-property/ simple-audio-card,widgets; + /delete-property/ simple-audio-card,routing; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&max98357a>; + }; + }; + + uc-imt-power { + compatible = "reg-userspace-consumer"; + regulator-name = "reg_imt-consumer"; + regulator-supplies = "vcc"; + vcc-supply = <®_imt>; + }; +}; + +&adc2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + /delete-node/ wm8731@1a; + + /* DS1339 RTC module */ + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + trickle-resistor-ohms = <250>; + interrupt-parent = <&gpio1>; + interrupts = <13 GPIO_ACTIVE_LOW>; // Pin 120 RTC_INT_B + wakeup-source; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio4 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 175 I2C4_SCL + sda-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 173 I2C4_SDA + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + gpio8: max7312@23 { + compatible = "maxim,max7312"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_DEBUG_GN", "LED_DEBUG_RT", "LED_UL_GN", "LED_RCD_GN", + "", "", "LED_UL_RT", "LED_RCD_RT", + "LED_NETZ_RT", "LED_NETZ_GN", "", "", + "DP_HW_CODE_1", "DP_HW_CODE_2", "DP_HW_CODE_3", "DP_HW_CODE_4"; + vcc-supply = <®_vcc_3v3_per>; + }; +}; + +&gpio1 { + gpio-line-names = "GWDOG_RST_B", "BTN_S3_STA", "BTN_S4_IDN", "", + "", "", "", "USB_HOST_PWR_EN", + "", "", "BTN_S2_HLP", "BTN_S1_MEM", + "BTN_S0_ESC", "RTC_INT_B", "SOM: bt reg on"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "DBG_GPIO1", "DBG_GPIO2", "DBG_GPIO3", "DBG_GPIO4", + "", "", "", "", + "MT_RXD", "MT_TXD", "", "", + "", "", "", "", + "", "", "", "", + "", "", "VCC_3V3_PER_EN", "", + "DSI_RESET", "VCC_5V0_PER_EN"; +}; + +&gpio3 { + gpio-line-names = "", "", "LED_TEST1_B", "LED_TEST2_B", + "BTN_S8", "BTN_S6", "MT_RESET", "", + "", "", "MT_EN", "", + "", "", "", "", + "", "", "", "", + "AUDIO_SHDN_B", "", "BTN_S7", "", + "BTN_S5", "", "", "BTN_S9", + "BATT_LOW"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "I2C1_SCL", "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", + "", "", "I2C4_SCL", "I2C4_SDA", + "", "", "", "", + "", "", "", "HIL_SPI_CS0"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "SOM: ethphy0 reset"; +}; + +&gpio6 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "SOM: sd3_pwr (eMMC)"; +}; + +&gpio7 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "LCD_BACKLIGHT_EN", "", "POWER_OFF_B"; +}; + +&lcdif { + assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>, + <&clks IMX7D_PLL_VIDEO_POST_DIV>; + assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>; + assigned-clock-rates = <0>, <128000000>; + fsl,ocram = <&ocram>; + fsl,pxp = <&pxp>; + status = "okay"; +}; + +&mipi_dsi { + samsung,burst-clock-frequency = <850000000>; + status = "okay"; + + panel@0 { + compatible = "tianma,tm050jdhg33", "ilitek,ili9881c"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_panel>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; // Pin 73 DSI_RESET + power-supply = <®_vcc_3v3_per>; + dsi-lanes = <2>; + + rotation = <90>; + + ilitek,enable-internal-backlight; + default-brightness = <2047>; + ilitek,pwm-frequency = <50000>; + ilitek,backlight-supply = <®_vled_backlight>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&iomuxc_lpsr { + pinctrl_gpio_keys_2: pinctrl_gpio_keys_2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0C + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0C + >; + }; + + pinctrl_usbotg2_pwr: pinctrl_usbotg2_pwrgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 + >; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: pinctrl-gpio-keysgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x0000000C + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0000000C + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0000000C + MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x0000000C + MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x0000000C + MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0000000C + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0000000C + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x0000000C + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x4000007f + MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x4000007f + >; + }; + + pinctrl_mipi_backlight: mipi-backlightgrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x0000001B + >; + }; + + pinctrl_mipi_panel: mipi-panelgrp { + fsl,pins = < + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x0000001B /* DSI_RESET */ + >; + }; + + pinctrl_poweroff: pinctrl_poweroffgrp { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0000001B + >; + }; + + pinctrl_reg_vcc_3v3_per: pinctrl_reg_vcc_3v3_pergrp { + fsl,pins = < + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x0000001B + >; + }; + + pinctrl_reg_vcc_5v0_per: pinctrl_reg_vcc_5v0_pergrp { + fsl,pins = < + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x0000001B + >; + }; + + pinctrl_reg_imt: pinctrl_reg_imtgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x0000001B + >; + }; + + pinctrl_rtc: pinctrl_rtcgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0000001B + >; + }; + + pinctrl_sai3: pinctrl_sai3grp { + fsl,pins = < + MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x0000001F + MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x0000001F + MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x00000030 + >; + }; + + pinctrl_sdmode: pinctrl_sdmodegrp { + fsl,pins = < + MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0000001F + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 /* DEBUG_UART1_TXD */ + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 /* DEBUG_UART1_RXD */ + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x79 + MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x79 + >; + }; + + pinctrl_debug_led: pinctrl_debug_ledgrp { + fsl,pins = < + MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00000003 + MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00000003 + >; + }; +}; diff --git a/arch/arm/dts/imx7d-pinfunc.kernel.h b/arch/arm/dts/imx7d-pinfunc.kernel.h new file mode 100644 index 000000000000..141192404b65 --- /dev/null +++ b/arch/arm/dts/imx7d-pinfunc.kernel.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __DTS_IMX7D_PINFUNC_KERNEL_H +#define __DTS_IMX7D_PINFUNC_KERNEL_H + +#define MX7D_PAD_LPSR_GPIO1_IO03__OSC32K_32K_OUT 0x000C 0x003C 0x0000 0x4 0x0 + +#endif /* __DTS_IMX7D_PINFUNC_KERNEL_H */ diff --git a/arch/arm/dts/imx7d-var-som-mx7.kernel.dtsi b/arch/arm/dts/imx7d-var-som-mx7.kernel.dtsi new file mode 100644 index 000000000000..591436ffc6a0 --- /dev/null +++ b/arch/arm/dts/imx7d-var-som-mx7.kernel.dtsi @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2016-2017 Variscite Ltd. + * Copyright (C) 2022 Philipp Zabel, Pengutronix + * Copyright (C) 2022 Roland Hieber, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "imx7d.kernel.dtsi" + +/ { + model = "Variscite i.MX7 Dual VAR-SOM-MX7"; + compatible = "variscite,var-som-mx7", "fsl,imx7d"; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_usb_otg1_vbus: regulator-usbotg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usbotg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wlreg_on: regulator-wlreg-on { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlreg_on"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8731audio"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Jack", + "Microphone", "Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line Jack", + "RLINEIN", "Line Jack", + "MICIN", "Mic Bias", + "Mic Bias", "Mic Jack"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + sound_master: simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8731>; + system-clock-frequency = <12288000>; + }; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; +}; + +&cpu0 { + cpu-supply = <&sw1a_reg>; +}; + +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <&vgen3_reg>; + assigned-clocks = <&clks IMX7D_ENET_PHY_REF_ROOT_SRC>, + <&clks IMX7D_ENET_AXI_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_25M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <0>, <0>, <100000000>, <250000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + phy-reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + phy-reset-post-delay = <20>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-supply = <&vgen3_reg>; + assigned-clocks = <&clks IMX7D_ENET_PHY_REF_ROOT_SRC>, + <&clks IMX7D_ENET_AXI_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_25M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <0>, <0>, <100000000>, <250000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + phy-reset-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; + phy-reset-post-delay = <20>; +}; + +&gpio6 { + sd3-pwr-hog { + gpio-hog; + gpios = <11 0>; + output-low; + line-name = "sd3_pwr"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + status = "disabled"; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "rohm,br24g04", "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + num-addresses = <2>; + address-width = <8>; + read-only; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + wm8731: wm8731@1a { + #sound-dai-cells = <0>; + AVDD-supply = <&vgen6_reg>; + HPVDD-supply = <&vgen6_reg>; + DBVDD-supply = <&vgen6_reg>; + DCVDD-supply = <&vgen6_reg>; + compatible = "wlf,wm8731"; + reg = <0x1a>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clock-names = "mclk"; + assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <12288000>; + }; +}; + +&sai1 { + assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <12288000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart1 { + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; +}; + +&uart2 { + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; +}; + +&uart3 { + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; +}; + +&usdhc2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_wlan>, <&pinctrl_bt>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_wlan>, <&pinctrl_bt>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_wlan>, <&pinctrl_bt>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_wlan_sleep>, <&pinctrl_bt_sleep>; + keep-power-in-suspend; + non-removable; + vmmc-supply = <&wlreg_on>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3_ctrl>, <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_ctrl>, <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_ctrl>, <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <&vgen3_reg>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + no-1-8-v; + no-sdio; + no-sd; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc_lpsr { + pinctrl_usbotg1_vbus: usbotg1-vbusgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 + >; + }; + + pinctrl_usbotg2_vbus: usbotg2-vbusgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x09 /* WL_REG_ON */ + MX7D_PAD_LPSR_GPIO1_IO03__OSC32K_32K_OUT 0xb0 /* WIFI Slow clock */ + >; + }; + + pinctrl_wlan_sleep: wlan-sleepgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x10 /* WL_REG_ON */ + MX7D_PAD_LPSR_GPIO1_IO03__OSC32K_32K_OUT 0x10 /* WIFI Slow clock */ + >; + }; +}; + +&iomuxc { + + pinctrl_bt: btgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x80000000 /* bt reg on */ + >; + }; + + pinctrl_bt_sleep: bt-sleepgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x10 /* bt reg on */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59 /* ethphy0 reset */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x59 /* ethphy1 reset */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f + MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f + MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79 + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79 + MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x79 + MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x79 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b + >; + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = < + MX7D_PAD_SD2_CMD__GPIO5_IO13 0x10 + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x10 + MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x10 + MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x10 + MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x10 + MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x10 + >; + }; + + pinctrl_usdhc3_ctrl: usdhc3-ctrlgrp { + fsl,pins = < + MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + >; + }; +}; diff --git a/arch/arm/dts/imx7d.kernel.dtsi b/arch/arm/dts/imx7d.kernel.dtsi new file mode 100644 index 000000000000..bc066b71a373 --- /dev/null +++ b/arch/arm/dts/imx7d.kernel.dtsi @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Freescale Semiconductor, Inc. +// Copyright 2016 Toradex AG + +#include "imx7s.kernel.dtsi" +#include + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; + }; + + cpus { + cpu0: cpu@0 { + clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + nvmem-cells = <&fuse_grade>; + nvmem-cell-names = "speed_grade"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + cpu-idle-states = <&cpu_sleep_wait>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; + interrupts = , + , + , + ; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xd>, <0x7>; + opp-suspend; + }; + + opp-996000000 { + opp-hz = /bits/ 64 <996000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xc>, <0x7>; + opp-suspend; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0x8>, <0x3>; + opp-suspend; + }; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + soc: soc { + etm@3007d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007d000 0x1000>; + + /* + * System will hang if added nosmp in kernel command line + * without arm,primecell-periphid because amba bus try to + * read id and core1 power off at this time. + */ + arm,primecell-periphid = <0xbb956>; + cpu = <&cpu1>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x31001000 0x1000>, + <0x31002000 0x2000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + + pcie: pcie@33800000 { + compatible = "fsl,imx7d-pcie"; + reg = <0x33800000 0x4000>, + <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + /* + * Reference manual lists pci irqs incorrectly + * Real hardware ordering is same as imx6: D+MSI, C, B, A + */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, + <&clks IMX7D_PCIE_PHY_ROOT_CLK>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, + <&clks IMX7D_PCIE_PHY_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX7_RESET_PCIEPHY>, + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + fsl,imx7d-pcie-phy = <&pcie_phy>; + status = "disabled"; + }; + }; +}; + +&aips2 { + pcie_phy: pcie-phy@306d0000 { + compatible = "fsl,imx7d-pcie-phy"; + reg = <0x306d0000 0x10000>; + status = "disabled"; + }; + + pxp: pxp@30700000 { + compatible = "fsl,imx7d-pxp"; + reg = <0x30700000 0x10000>; + interrupts = , + ; + clocks = <&clks IMX7D_PXP_CLK>; + clock-names = "axi"; + }; +}; + +&aips3 { + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; + + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = , + , + , + ; + clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 4>; + status = "disabled"; + }; +}; + +&ca_funnel_in_ports { + port@1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + remote-endpoint = <&etm1_out_port>; + }; + }; +}; diff --git a/arch/arm/dts/imx7s.kernel.dtsi b/arch/arm/dts/imx7s.kernel.dtsi new file mode 100644 index 000000000000..6ea9e05f7b48 --- /dev/null +++ b/arch/arm/dts/imx7s.kernel.dtsi @@ -0,0 +1,1354 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Freescale Semiconductor, Inc. +// Copyright 2016 Toradex AG + +#include +#include +#include +#include +#include +#include +#include +#include "imx7d-pinfunc.kernel.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbh; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + idle-states { + entry-method = "psci"; + + cpu_sleep_wait: cpu-sleep-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <50>; + min-residency-us = <1000>; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-frequency = <792000000>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX7D_CLK_ARM>; + cpu-idle-states = <&cpu_sleep_wait>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + nvmem-cells = <&fuse_grade>; + nvmem-cell-names = "speed_grade"; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xf>, <0xf>; + }; + }; + + ckil: clock-cki { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + power-domains = <&pgc_hsic_phy>; + #phy-cells = <0>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&gpc>; + interrupts = ; + interrupt-affinity = <&cpu0>; + }; + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-static-replicator"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + + in-ports { + port { + replicator_in_port0: endpoint { + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupt-parent = <&intc>; + interrupts = , + , + , + ; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks IMX7D_OCRAM_CLK>; + }; + + funnel@30041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x30041000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ca_funnel_in_ports: in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ca_funnel_in_port0: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + + }; + }; + + etm@3007c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007c000 0x1000>; + cpu = <&cpu0>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + }; + + funnel@30083000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x30083000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hugo_funnel_in_port0: endpoint { + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port@1 { + reg = <1>; + hugo_funnel_in_port1: endpoint { + /* M4 input */ + }; + }; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + }; + }; + + etf@30084000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30084000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + etf_in_port: endpoint { + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + }; + + out-ports { + port { + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + etr@30086000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30086000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + tpiu@30087000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x30087000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x31001000 0x1000>, + <0x31002000 0x2000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + + aips1: bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x400000>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = , /* GPIO1_INT15_0 */ + ; /* GPIO1_INT31_16 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 13 32>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 45 29>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 74 24>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 98 18>; + }; + + gpio6: gpio@30250000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30250000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 116 23>; + }; + + gpio7: gpio@30260000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30260000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 139 16>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; + status = "disabled"; + }; + + wdog4: watchdog@302b0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302b0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; + status = "disabled"; + }; + + iomuxc_lpsr: pinctrl@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + + gpt1: timer@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_GPT1_ROOT_CLK>, + <&clks IMX7D_GPT1_ROOT_CLK>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_GPT2_ROOT_CLK>, + <&clks IMX7D_GPT2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt3: timer@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_GPT3_ROOT_CLK>, + <&clks IMX7D_GPT3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt4: timer@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; + reg = <0x30300000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_GPT4_ROOT_CLK>, + <&clks IMX7D_GPT4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + kpp: keypad@30320000 { + compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; + reg = <0x30320000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_KPP_ROOT_CLK>; + status = "disabled"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx7d-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon", + "simple-mfd"; + reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x14 0x00000010>; + }; + + video_mux: csi-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + csi_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_csi_mux>; + }; + }; + + port@2 { + reg = <2>; + + csi_mux_to_csi: endpoint { + remote-endpoint = <&csi_from_csi_mux>; + }; + }; + }; + }; + + ocotp: efuse@30350000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx7d-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clks IMX7D_OCOTP_CLK>; + + tempmon_calib: calib@3c { + reg = <0x3c 0x4>; + }; + + fuse_grade: fuse-grade@10 { + reg = <0x10 0x4>; + }; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", + "syscon", "simple-mfd"; + reg = <0x30360000 0x10000>; + interrupts = , + ; + + reg_1p0d: regulator-vdd1p0d { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p0d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + anatop-reg-offset = <0x210>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <8>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1200000>; + anatop-enable-bit = <0>; + }; + + reg_1p2: regulator-vdd1p2 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + anatop-reg-offset = <0x220>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0x14>; + anatop-min-voltage = <1100000>; + anatop-max-voltage = <1300000>; + anatop-enable-bit = <0>; + }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = , + ; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-rtc"; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = ; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-pwrkey"; + linux,keycode = ; + wakeup-source; + status = "disabled"; + }; + }; + + clks: clock-controller@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx7d-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = ; + #reset-cells = <1>; + }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_mipi_phy: power-domain@0 { + #power-domain-cells = <0>; + reg = <0>; + power-supply = <®_1p0d>; + }; + + pgc_pcie_phy: power-domain@1 { + #power-domain-cells = <0>; + reg = <1>; + power-supply = <®_1p0d>; + }; + + pgc_hsic_phy: power-domain@2 { + #power-domain-cells = <0>; + reg = <2>; + power-supply = <®_1p2>; + }; + }; + }; + }; + + aips2: bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30400000 0x400000>; + ranges; + + adc1: adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc2: adc@30620000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30620000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + ecspi4: spi@30630000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30630000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, + <&clks IMX7D_ECSPI4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ftm1: pwm@30640000 { + compatible = "fsl,vf610-ftm-pwm"; + reg = <0x30640000 0x10000>; + #pwm-cells = <3>; + interrupts = ; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER1_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER1_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER1_ROOT_CLK>; + status = "disabled"; + }; + + ftm2: pwm@30650000 { + compatible = "fsl,vf610-ftm-pwm"; + reg = <0x30650000 0x10000>; + #pwm-cells = <3>; + interrupts = ; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER2_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER2_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER2_ROOT_CLK>; + status = "disabled"; + }; + + pwm1: pwm@30660000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM1_ROOT_CLK>, + <&clks IMX7D_PWM1_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM2_ROOT_CLK>, + <&clks IMX7D_PWM2_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM3_ROOT_CLK>, + <&clks IMX7D_PWM3_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM4_ROOT_CLK>, + <&clks IMX7D_PWM4_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + status = "disabled"; + }; + + csi: csi@30710000 { + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; + + lcdif: lcdif@30730000 { + compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x30730000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, + <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>; + clock-names = "pix", "axi"; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + lcdif_out_mipi_dsi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_dsi_in_lcdif>; + }; + }; + }; + + mipi_csi: mipi-csi@30750000 { + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; + }; + + mipi_dsi: dsi@30760000 { + compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30760000 0x400>; + clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>, + <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-rates = <0>, <333000000>; + power-domains = <&pgc_mipi_phy>; + interrupts = ; + samsung,burst-clock-frequency = <891000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_dsi_in_lcdif: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_out_mipi_dsi>; + }; + }; + }; + }; + }; + + aips3: bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x400000>; + ranges; + + spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; + + ecspi1: spi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, + <&clks IMX7D_ECSPI1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, + <&clks IMX7D_ECSPI2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, + <&clks IMX7D_ECSPI3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + sai1: sai@308a0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308a0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_SAI1_IPG_CLK>, + <&clks IMX7D_SAI1_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; + status = "disabled"; + }; + + sai2: sai@308b0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308b0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_SAI2_IPG_CLK>, + <&clks IMX7D_SAI2_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; + status = "disabled"; + }; + + sai3: sai@308c0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308c0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_SAI3_IPG_CLK>, + <&clks IMX7D_SAI3_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; + status = "disabled"; + }; + }; + + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = ; + clocks = <&clks IMX7D_CAAM_CLK>, + <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clock-names = "ipg", "aclk"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = ; + }; + }; + + flexcan1: can@30a00000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a00000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN1_ROOT_CLK>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1>; + status = "disabled"; + }; + + flexcan2: can@30a10000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a10000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN2_ROOT_CLK>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2>; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_I2C1_ROOT_CLK>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_I2C2_ROOT_CLK>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_I2C3_ROOT_CLK>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_I2C4_ROOT_CLK>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART4_ROOT_CLK>, + <&clks IMX7D_UART4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@30a70000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a70000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART5_ROOT_CLK>, + <&clks IMX7D_UART5_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@30a80000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a80000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART6_ROOT_CLK>, + <&clks IMX7D_UART6_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@30a90000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a90000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART7_ROOT_CLK>, + <&clks IMX7D_UART7_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + mu0a: mailbox@30aa0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu0b: mailbox@30ab0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30ab0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + fsl,mu-side-b; + status = "disabled"; + }; + + usbotg1: usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbh: usb@30b30000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b30000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop3>; + fsl,usbmisc = <&usbmisc3 0>; + phy_type = "hsic"; + dr_mode = "host"; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc1: usbmisc@30b10200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b10200 0x200>; + }; + + usbmisc3: usbmisc@30b30200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b30200 0x200>; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, + <&clks IMX7D_USDHC1_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, + <&clks IMX7D_USDHC2_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, + <&clks IMX7D_USDHC3_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + qspi: spi@30bb0000 { + compatible = "fsl,imx7d-qspi"; + reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&clks IMX7D_QSPI_ROOT_CLK>, + <&clks IMX7D_QSPI_ROOT_CLK>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + sdma: dma-controller@30bd0000 { + compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_SDMA_CORE_CLK>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = , + , + , + ; + clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 3>; + status = "disabled"; + }; + }; + + dma_apbh: dma-controller@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = , + , + , + ; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: nand-controller@33002000{ + compatible = "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = ; + interrupt-names = "bch"; + clocks = <&clks IMX7D_NAND_RAWNAND_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>; + }; + }; +}; -- 2.39.2