From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v3 2/2] net: macb: convert to volatile accesses
Date: Wed, 29 Nov 2023 12:33:48 +0100 [thread overview]
Message-ID: <20231129-v2023-08-0-topic-macb-v3-2-65ad6db834dc@pengutronix.de> (raw)
In-Reply-To: <20231129-v2023-08-0-topic-macb-v3-0-65ad6db834dc@pengutronix.de>
Instead of directly reading from memory addresses and inserting
sw barriers to be sure that the compiler will not move loads/stores
behind this point, just use proper volatile writel/readl accesses.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/net/macb.c | 53 +++++++++++++++++++++--------------------------------
1 file changed, 21 insertions(+), 32 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index d6708b190c..06ca0e9e33 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -124,17 +124,14 @@ static int macb_send(struct eth_device *edev, void *packet,
if (dma_mapping_error(macb->dev, packet_dma))
return -EFAULT;
- macb->tx_ring[tx_head].ctrl = ctrl;
- macb->tx_ring[tx_head].addr = packet_dma;
- barrier();
-
+ writel(ctrl, &macb->tx_ring[tx_head].ctrl);
+ writel(packet_dma, &macb->tx_ring[tx_head].addr);
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
start = get_time_ns();
ret = -ETIMEDOUT;
do {
- barrier();
- ctrl = macb->tx_ring[0].ctrl;
+ ctrl = readl(&macb->tx_ring[0].ctrl);
if (ctrl & MACB_BIT(TX_USED)) {
ret = 0;
break;
@@ -160,18 +157,17 @@ static void reclaim_rx_buffers(struct macb_device *macb,
i = macb->rx_tail;
while (i > new_tail) {
- macb->rx_ring[i].addr &= ~MACB_BIT(RX_USED);
+ clrbits_le32(&macb->rx_ring[i].addr, MACB_BIT(RX_USED));
i++;
if (i > macb->rx_ring_size)
i = 0;
}
while (i < new_tail) {
- macb->rx_ring[i].addr &= ~MACB_BIT(RX_USED);
+ clrbits_le32(&macb->rx_ring[i].addr, MACB_BIT(RX_USED));
i++;
}
- barrier();
macb->rx_tail = new_tail;
}
@@ -182,15 +178,11 @@ static int gem_recv(struct eth_device *edev)
u32 status;
for (;;) {
- barrier();
- if (!(macb->rx_ring[macb->rx_tail].addr & MACB_BIT(RX_USED)))
+ if (!(readl(&macb->rx_ring[macb->rx_tail].addr) & MACB_BIT(RX_USED)))
return -1;
- barrier();
- status = macb->rx_ring[macb->rx_tail].ctrl;
+ status = readl(&macb->rx_ring[macb->rx_tail].ctrl);
length = MACB_BFEXT(RX_FRMLEN, status);
- macb->rx_ring[macb->rx_tail].addr &= ~MACB_BIT(RX_USED);
- barrier();
dma_sync_single_for_cpu(macb->dev,
macb->rx_buffer_phys + macb->rx_buffer_size * macb->rx_tail,
length, DMA_FROM_DEVICE);
@@ -198,6 +190,7 @@ static int gem_recv(struct eth_device *edev)
dma_sync_single_for_device(macb->dev,
macb->rx_buffer_phys + macb->rx_buffer_size * macb->rx_tail,
length, DMA_FROM_DEVICE);
+ clrbits_le32(&macb->rx_ring[macb->rx_tail].addr, MACB_BIT(RX_USED));
macb->rx_tail++;
if (macb->rx_tail >= macb->rx_ring_size)
@@ -216,12 +209,10 @@ static int macb_recv(struct eth_device *edev)
u32 status;
for (;;) {
- barrier();
- if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
+ if (!(readl(&macb->rx_ring[rx_tail].addr) & MACB_BIT(RX_USED)))
return -1;
- barrier();
- status = macb->rx_ring[rx_tail].ctrl;
+ status = readl(&macb->rx_ring[rx_tail].ctrl);
if (status & MACB_BIT(RX_SOF)) {
if (rx_tail != macb->rx_tail)
reclaim_rx_buffers(macb, rx_tail);
@@ -262,7 +253,6 @@ static int macb_recv(struct eth_device *edev)
length,
DMA_FROM_DEVICE);
}
- barrier();
if (++rx_tail >= macb->rx_ring_size)
rx_tail = 0;
reclaim_rx_buffers(macb, rx_tail);
@@ -382,9 +372,9 @@ static int gmac_init_dummy_tx_queues(struct macb_device *macb)
if (queue_mask & (1 << i))
num_queues++;
- macb->gem_q1_descs[0].addr = 0;
- macb->gem_q1_descs[0].ctrl = MACB_BIT(TX_WRAP) |
- MACB_BIT(TX_LAST) | MACB_BIT(TX_USED);
+ writel(0, &macb->gem_q1_descs[0].addr);
+ writel(MACB_BIT(TX_WRAP) | MACB_BIT(TX_LAST) | MACB_BIT(TX_USED),
+ &macb->gem_q1_descs[0].ctrl);
for (i = 1; i < num_queues; i++)
gem_writel_queue_TBQP(macb, (ulong)macb->gem_q1_descs, i - 1);
@@ -410,17 +400,17 @@ static int macb_init(struct macb_device *macb)
/* initialize DMA descriptors */
paddr = (ulong)macb->rx_buffer;
for (i = 0; i < macb->rx_ring_size; i++) {
- macb->rx_ring[i].addr = paddr;
- macb->rx_ring[i].ctrl = 0;
+ writel(paddr, &macb->rx_ring[i].addr);
+ writel(0, &macb->rx_ring[i].ctrl);
paddr += macb->rx_buffer_size;
}
- macb->rx_ring[macb->rx_ring_size - 1].addr |= MACB_BIT(RX_WRAP);
+ setbits_le32(&macb->rx_ring[macb->rx_ring_size - 1].addr, MACB_BIT(RX_WRAP));
for (i = 0; i < TX_RING_SIZE; i++) {
- macb->tx_ring[i].addr = 0;
- macb->tx_ring[i].ctrl = MACB_BIT(TX_USED);
+ writel(0, &macb->tx_ring[i].addr);
+ writel(MACB_BIT(TX_USED), &macb->tx_ring[i].ctrl);
}
- macb->tx_ring[TX_RING_SIZE - 1].addr |= MACB_BIT(TX_WRAP);
+ setbits_le32(&macb->tx_ring[TX_RING_SIZE - 1].addr, MACB_BIT(TX_WRAP));
macb->rx_tail = macb->tx_head = 0;
@@ -433,9 +423,8 @@ static int macb_init(struct macb_device *macb)
gmac_init_dummy_tx_queues(macb);
/* Disable the second priority rx queue */
- macb->gem_q1_descs[1].addr = MACB_BIT(RX_USED) |
- MACB_BIT(RX_WRAP);
- macb->gem_q1_descs[1].ctrl = 0;
+ writel(MACB_BIT(RX_USED) | MACB_BIT(RX_WRAP), &macb->gem_q1_descs[1].addr);
+ writel(0, &macb->gem_q1_descs[1].ctrl);
gem_writel(macb, RQ1, (ulong)&macb->gem_q1_descs[1]);
}
--
2.40.1
next prev parent reply other threads:[~2023-11-29 11:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-29 11:33 [PATCH v3 0/2] net: macb: fix dma usage Steffen Trumtrar
2023-11-29 11:33 ` [PATCH v3 1/2] net: macb: fix dma_alloc for rx_buffer Steffen Trumtrar
2023-11-29 11:59 ` Ahmad Fatoum
2023-11-29 11:33 ` Steffen Trumtrar [this message]
2023-11-29 12:03 ` [PATCH v3 2/2] net: macb: convert to volatile accesses Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231129-v2023-08-0-topic-macb-v3-2-65ad6db834dc@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox