From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 1/2] net/phy: sync phy_interface_t types with Linux
Date: Wed, 3 Jan 2024 15:51:02 +0100 [thread overview]
Message-ID: <20240103145103.3589208-1-s.hauer@pengutronix.de> (raw)
This syncs the phy interface modes with Linux as of linux-6.7-rc7.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/linux/phy.h | 55 +++++++++++++++++++++++++++++++++++++++++----
1 file changed, 51 insertions(+), 4 deletions(-)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d68ee5665a..7da4f94e0e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -36,7 +36,46 @@
#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
PHY_1000BT_FEATURES)
-/* Interface Mode definitions */
+/**
+ * enum phy_interface_t - Interface Mode definitions
+ *
+ * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch
+ * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined
+ * @PHY_INTERFACE_MODE_MII: Media-independent interface
+ * @PHY_INTERFACE_MODE_GMII: Gigabit media-independent interface
+ * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface
+ * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface
+ * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface
+ * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface
+ * @PHY_INTERFACE_MODE_REVRMII: Reduced Media Independent Interface in PHY role
+ * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface
+ * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay
+ * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay
+ * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay
+ * @PHY_INTERFACE_MODE_RTBI: Reduced TBI
+ * @PHY_INTERFACE_MODE_SMII: Serial MII
+ * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface
+ * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface
+ * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax
+ * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII
+ * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII
+ * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII
+ * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX
+ * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX
+ * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX
+ * @PHY_INTERFACE_MODE_5GBASER: 5G BaseR
+ * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI
+ * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface
+ * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR
+ * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR
+ * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII
+ * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN
+ * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII
+ * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN
+ * @PHY_INTERFACE_MODE_MAX: Book keeping
+ *
+ * Describes the interface between the MAC and PHY.
+ */
typedef enum {
PHY_INTERFACE_MODE_NA,
PHY_INTERFACE_MODE_INTERNAL,
@@ -54,17 +93,25 @@ typedef enum {
PHY_INTERFACE_MODE_RTBI,
PHY_INTERFACE_MODE_SMII,
PHY_INTERFACE_MODE_XGMII,
+ PHY_INTERFACE_MODE_XLGMII,
PHY_INTERFACE_MODE_MOCA,
+ PHY_INTERFACE_MODE_PSGMII,
PHY_INTERFACE_MODE_QSGMII,
PHY_INTERFACE_MODE_TRGMII,
+ PHY_INTERFACE_MODE_100BASEX,
PHY_INTERFACE_MODE_1000BASEX,
PHY_INTERFACE_MODE_2500BASEX,
+ PHY_INTERFACE_MODE_5GBASER,
PHY_INTERFACE_MODE_RXAUI,
PHY_INTERFACE_MODE_XAUI,
- /* 10GBASE-KR, XFI, SFI - single lane 10G Serdes */
+ /* 10GBASE-R, XFI, SFI - single lane 10G Serdes */
+ PHY_INTERFACE_MODE_10GBASER,
+ PHY_INTERFACE_MODE_25GBASER,
+ PHY_INTERFACE_MODE_USXGMII,
+ /* 10GBASE-KR - with Clause 73 AN */
PHY_INTERFACE_MODE_10GKR,
- PHY_INTERFACE_MODE_SGMII_2500,
- PHY_INTERFACE_MODE_NONE,
+ PHY_INTERFACE_MODE_QUSGMII,
+ PHY_INTERFACE_MODE_1000BASEKX,
PHY_INTERFACE_MODE_MAX,
} phy_interface_t;
--
2.39.2
next reply other threads:[~2024-01-03 14:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-03 14:51 Sascha Hauer [this message]
2024-01-03 14:51 ` [PATCH 2/2] net: Add fsl_enetc network driver support Sascha Hauer
2024-01-03 15:16 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240103145103.3589208-1-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox