From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] usb: xhci: call dma_unmap_single in error paths
Date: Wed, 10 Jan 2024 07:48:22 +0100 [thread overview]
Message-ID: <20240110064822.GN1318922@pengutronix.de> (raw)
In-Reply-To: <20240109120201.211691-1-a.fatoum@pengutronix.de>
On Tue, Jan 09, 2024 at 01:02:01PM +0100, Ahmad Fatoum wrote:
> xHCI ring handling maps buffers prior to DMA and unmaps them on success,
> but leaves them mapped in the error case. This leads to buffers being
> remapped again triggering a CONFIG_DMA_API_DEBUG warning along with
> a stack trace:
>
> WARNING: dwc3 2f00000.usb@2f00000.of: from-device mapping 0xbdfa0000+0x800: duplicate mapping
>
> Fix this by unmapping the code in the error case too. This is ok to do,
> because in the first instace, DMA hasn't been enabled yet and in the
> others abort_td() called beforehand terminates it.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/usb/host/xhci-ring.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
Applied, thanks
Sascha
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 995772f92722..547047305dd0 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -639,8 +639,10 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
> */
> ret = prepare_ring(ctrl, ring,
> le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
> - if (ret < 0)
> + if (ret < 0) {
> + dma_unmap_single(ctrl->host.hw_dev, map, length, direction);
> return ret;
> + }
>
> /*
> * Don't give the first TRB to the hardware (by toggling the cycle bit)
> @@ -725,6 +727,7 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
> abort_td(udev, ep_index);
> udev->status = USB_ST_NAK_REC; /* closest thing to a timeout */
> udev->act_len = 0;
> + dma_unmap_single(ctrl->host.hw_dev, map, length, direction);
> return -ETIMEDOUT;
> }
> field = le32_to_cpu(event->trans_event.flags);
> @@ -967,5 +970,6 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
> abort_td(udev, ep_index);
> udev->status = USB_ST_NAK_REC;
> udev->act_len = 0;
> + dma_unmap_single(ctrl->host.hw_dev, map, length, direction);
> return -ETIMEDOUT;
> }
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2024-01-10 6:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-09 12:02 Ahmad Fatoum
2024-01-10 6:48 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240110064822.GN1318922@pengutronix.de \
--to=sha@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox