From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Wed, 21 Feb 2024 16:04:17 +0100 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1rco8v-00HNpR-33 for lore@lore.pengutronix.de; Wed, 21 Feb 2024 16:04:17 +0100 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1rco8u-0005HC-7m for lore@pengutronix.de; Wed, 21 Feb 2024 16:04:17 +0100 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To: Cc:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=DfjlYDtc+yxBv+M50L4cXN1GUzWT5cnOqYOYABEHJvE=; b=aYmaJ5mZ0EPRSsjPpk/hbEEix3 yPQBr/zaJt6UjAGG5k0FTh+eM3dgYQNkVgL9YzpxMrwkQMGvk8oFee6lVB27ZDvHwQRcKvKd8/2Ev 1CtWugCy2msAepKrCzCcBYCT6YKcVlDJoM4X1DJfs9uuRqzCF7noEbIa5QwUG+xE+uupl0mMzlK9F qMLw64kxrnQ/VIT3Pwg4XAalQerCHlDvVi3fg0roD+cQSjAMUw6LU2jZpXzZad2O2oB+pIcnc2lAh uDAEaloJV/nPq+cCfl1KLDhFCipkJwa7D3E/V1TQ8ZfcV+trwOPuPG2fLsnvYUCh4YXE8BWDnOn1L PAmxxT+A==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1rco8H-00000001OSe-0Luy; Wed, 21 Feb 2024 15:03:37 +0000 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1rco86-00000001OMB-20Og for barebox@lists.infradead.org; Wed, 21 Feb 2024 15:03:31 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1rco84-0004hP-Ua; Wed, 21 Feb 2024 16:03:24 +0100 Received: from [2a0a:edc0:0:1101:1d::28] (helo=dude02.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1rco84-0023jI-HV; Wed, 21 Feb 2024 16:03:24 +0100 Received: from localhost ([::1] helo=dude02.red.stw.pengutronix.de) by dude02.red.stw.pengutronix.de with esmtp (Exim 4.96) (envelope-from ) id 1rco84-00BYvn-1P; Wed, 21 Feb 2024 16:03:24 +0100 From: Sascha Hauer To: Barebox List Date: Wed, 21 Feb 2024 16:03:23 +0100 Message-Id: <20240221150323.2715164-9-s.hauer@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240221150323.2715164-1-s.hauer@pengutronix.de> References: <20240221150323.2715164-1-s.hauer@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240221_070326_863393_17333765 X-CRM114-Status: GOOD ( 25.56 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.whiteo.stw.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-5.1 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,SPF_HELO_NONE,SPF_NONE, T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: [PATCH 8/8] ARM: tqma6ul: use upstream device trees X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.whiteo.stw.pengutronix.de) The tqma6ul has several upstream device trees depending on the exact board type. This removes the downstream device tree in favour for the upstream device trees. The board type can be determined from an EEPROM on the board. This patch also adds support for reading the EEPROM and picking the right device tree for the board found. The EEPROM has the board described as strings. I do not know the correct strings for the boards I don't have, so right now only the device tree for the "TQMa6UL2L-AB.0202" board is picked. A warning is printed when an unknown board type is found, so this can be added as new board type when found. Signed-off-by: Sascha Hauer --- arch/arm/boards/tqma6ulx/board.c | 7 +- arch/arm/boards/tqma6ulx/lowlevel.c | 45 ++- arch/arm/dts/Makefile | 5 +- arch/arm/dts/imx6ul-mba6ulx.dtsi | 333 ------------------ ...mba6ulx.dts => imx6ul-tqma6ul-common.dtsi} | 5 - arch/arm/dts/imx6ul-tqma6ul2-mba6ulx.dts | 4 + arch/arm/dts/imx6ul-tqma6ul2l-mba6ulx.dts | 4 + arch/arm/dts/imx6ull-tqma6ull2-mba6ulx.dts | 4 + arch/arm/dts/imx6ull-tqma6ull2l-mba6ulx.dts | 4 + arch/arm/dts/tqma6ul-common.dtsi | 191 ---------- arch/arm/dts/tqma6ulx-common.dtsi | 28 -- arch/arm/mach-imx/Kconfig | 3 + 12 files changed, 72 insertions(+), 561 deletions(-) delete mode 100644 arch/arm/dts/imx6ul-mba6ulx.dtsi rename arch/arm/dts/{imx6ul-mba6ulx.dts => imx6ul-tqma6ul-common.dtsi} (96%) create mode 100644 arch/arm/dts/imx6ul-tqma6ul2-mba6ulx.dts create mode 100644 arch/arm/dts/imx6ul-tqma6ul2l-mba6ulx.dts create mode 100644 arch/arm/dts/imx6ull-tqma6ull2-mba6ulx.dts create mode 100644 arch/arm/dts/imx6ull-tqma6ull2l-mba6ulx.dts delete mode 100644 arch/arm/dts/tqma6ul-common.dtsi delete mode 100644 arch/arm/dts/tqma6ulx-common.dtsi diff --git a/arch/arm/boards/tqma6ulx/board.c b/arch/arm/boards/tqma6ulx/board.c index be0abe443e..378cadc018 100644 --- a/arch/arm/boards/tqma6ulx/board.c +++ b/arch/arm/boards/tqma6ulx/board.c @@ -40,7 +40,10 @@ static int mba6ulx_probe(struct device *dev) } static const struct of_device_id mba6ulx_of_match[] = { - { .compatible = "tq,mba6ulx" }, + { .compatible = "tq,imx6ul-tqma6ul2l" }, + { .compatible = "tq,imx6ul-tqma6ul2" }, + { .compatible = "tq,imx6ull-tqma6ull2" }, + { .compatible = "tq,imx6ull-tqma6ull2l" }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mba6ulx_of_match); @@ -51,3 +54,5 @@ static struct driver mba6ulx_board_driver = { .of_compatible = mba6ulx_of_match, }; device_platform_driver(mba6ulx_board_driver); + +BAREBOX_DEEP_PROBE_ENABLE(mba6ulx_of_match); diff --git a/arch/arm/boards/tqma6ulx/lowlevel.c b/arch/arm/boards/tqma6ulx/lowlevel.c index 052471a99c..eff38c336a 100644 --- a/arch/arm/boards/tqma6ulx/lowlevel.c +++ b/arch/arm/boards/tqma6ulx/lowlevel.c @@ -13,8 +13,13 @@ #include #include #include +#include +#include -extern char __dtb_z_imx6ul_mba6ulx_start[]; +extern char __dtb_z_imx6ul_tqma6ul2_mba6ulx_start[]; +extern char __dtb_z_imx6ul_tqma6ul2l_mba6ulx_start[]; +extern char __dtb_z_imx6ull_tqma6ull2_mba6ulx_start[]; +extern char __dtb_z_imx6ull_tqma6ull2l_mba6ulx_start[]; static void setup_uart(void) { @@ -30,11 +35,47 @@ static void setup_uart(void) } +static void *read_eeprom(void) +{ + struct pbl_i2c *i2c; + struct tq_eeprom *eeprom; + void __iomem *iomux = (void *)MX6_IOMUXC_BASE_ADDR; + void *fdt = __dtb_z_imx6ul_tqma6ul2l_mba6ulx_start; + + writel(0x12, iomux + 0x0094); + writel(0x0, iomux + 0x05bc); + writel(0x1b8b0, iomux + 0x0320); + writel(0x12, iomux + 0x0098); + writel(0x0, iomux + 0x05c0); + writel(0x1b8b0, iomux + 0x0324); + + i2c = imx6_i2c_early_init(IOMEM(MX6_I2C4_BASE_ADDR)); + + eeprom = pbl_tq_read_eeprom(i2c, 0x50, I2C_ADDR_16_BIT); + if (!eeprom) { + pr_err("Cannot read EEPROM\n"); + goto out; + } + + pr_info("Board: %s\n", eeprom->id); + + if (!strcmp(eeprom->id, "TQMa6UL2L-AB.0202")) + fdt = __dtb_z_imx6ul_tqma6ul2l_mba6ulx_start; + else + pr_err("Unknown board type\n"); +out: + return fdt; +} + static void noinline start_mba6ulx(void) { + void *fdt; + setup_uart(); - imx6ul_barebox_entry(__dtb_z_imx6ul_mba6ulx_start); + fdt = read_eeprom(); + + imx6ul_barebox_entry(fdt); } ENTRY_FUNCTION(start_imx6ul_mba6ulx, r0, r1, r2) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7800231570..db40c45084 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -160,7 +160,10 @@ lwl-$(CONFIG_MACH_TQ_MBA8MPXL) += imx8mp-tqma8mpql-mba8mpxl.dtb.o lwl-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o lwl-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o lwl-$(CONFIG_MACH_TQMA53) += imx53-mba53.dtb.o -lwl-$(CONFIG_MACH_TQMA6UL) += imx6ul-mba6ulx.dtb.o +lwl-$(CONFIG_MACH_TQMA6UL) += imx6ul-tqma6ul2-mba6ulx.dtb.o \ + imx6ul-tqma6ul2l-mba6ulx.dtb.o \ + imx6ull-tqma6ull2-mba6ulx.dtb.o \ + imx6ull-tqma6ull2l-mba6ulx.dtb.o lwl-$(CONFIG_MACH_TQMA6X) += imx6dl-mba6x.dtb.o imx6q-mba6x.dtb.o lwl-$(CONFIG_MACH_TX25) += imx25-karo-tx25.dtb.o lwl-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o diff --git a/arch/arm/dts/imx6ul-mba6ulx.dtsi b/arch/arm/dts/imx6ul-mba6ulx.dtsi deleted file mode 100644 index da73248084..0000000000 --- a/arch/arm/dts/imx6ul-mba6ulx.dtsi +++ /dev/null @@ -1,333 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright 2016 TQ Systems GmbH - * Author: Marco Felsch - */ - -/dts-v1/; - -#include -#include "imx6ul-tqma6ulx.dtsi" - -/ { - model = "TQ TQMa6ULx SoM on MBa6ULx"; - compatible = "tq,mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; - - chosen { - stdout-path = &uart1; - }; - - reg_mba6ul_3v3: regulator-mba6ul-3v3 { - compatible = "regulator-fixed"; - regulator-name = "supply-mba6ul-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_mba6ul_5v0: regulator-mba6ul-5v0 { - compatible = "regulator-fixed"; - regulator-name = "supply-mba6ul-5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { - compatible = "regulator-fixed"; - gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-name = "otg2-vbus-supply-5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_mba6ul_5v0>; - }; - - reg_otg1vbus_5v0: regulator-otg1-vbus-5v0 { - compatible = "regulator-fixed"; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-name = "otg1-vbus-supply-5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_mba6ul_5v0>; - }; - - reg_fec_3v3: regulator-fec-3v3 { - compatible = "regulator-fixed"; - regulator-name = "fec-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <®_mba6ul_3v3>; - }; - - reg_mpcie: regulator-mpcie-1v5 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - regulator-name = "mpcie-1v5"; - /* gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; */ - enable-active-high; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - vin-supply = <®_mba6ul_3v3>; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rmii"; - phy-handle = <ðphy0>; - phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; - phy-reset-duration = <26>; - status = "okay"; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; - phy-reset-duration = <26>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - max-speed = <100>; - reg = <0>; - /* ToDo: check if following 2 lines are required */ - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - max-speed = <100>; - reg = <1>; - /* ToDo: check if following 2 lines are required */ - clocks = <&clks IMX6UL_CLK_ENET2_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - expander_io: gpio-expander@20 { - compatible = "nxp,pca9554"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - status = "okay"; - }; - - expander_in: gpio-expander@21 { - compatible = "nxp,pca9554"; - reg = <0x21>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_expander_irq>; - interrupt-parent = <&gpio5>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - status = "okay"; - }; - - expander_out: gpio-expander@22 { - compatible = "nxp,pca9554"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - status = "okay"; - }; - - - /* NXP SE97BTP with temperature sensor + eeprom */ - jc42_1b: eeprom-temperature-sensor@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; - reg = <0x1b>; - status = "okay"; - }; - - se97_53: eeprom-temperature-sensor@53 { - compatible = "nxp,spd"; - reg = <0x53>; - pagesize = <16>; - status = "okay"; - }; - -}; - - -&iomuxc { - pinctrl-names = "default"; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x4001b8b0 - MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x4001b8b0 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 - /* mdio */ - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - >; - }; - - pinctrl_expander_irq: expanderirqgrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 - MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 - /* PWR */ - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x0001b099 - >; - }; - - pinctrl_usb_otg2: usbotg2grp { - fsl,pins = < - /* reset */ - MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0001b099 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 - /* CD */ - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 - /* CD */ - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 - /* CD */ - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 - >; - }; - - pinctrl_wdog1: wdog1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 - >; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -/* otg-port */ -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - vbus-supply = <®_otg1vbus_5v0>; - dr_mode = "otg"; - status = "okay"; -}; - -/* 7-port usb hub */ -/* id, pwr, oc pins not connected */ -&usbotg2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - disable-over-current; - vbus-supply = <®_otg2vbus_5v0>; - dr_mode = "host"; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - disable-wp; - bus-width = <4>; - vmmc-supply = <®_mba6ul_3v3>; - vqmmc-supply = <®_vccsd>; - no-1-8-v; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog1>; - fsl,ext-reset-output; - status = "okay"; -}; diff --git a/arch/arm/dts/imx6ul-mba6ulx.dts b/arch/arm/dts/imx6ul-tqma6ul-common.dtsi similarity index 96% rename from arch/arm/dts/imx6ul-mba6ulx.dts rename to arch/arm/dts/imx6ul-tqma6ul-common.dtsi index e2ed694ff9..64f1ee253c 100644 --- a/arch/arm/dts/imx6ul-mba6ulx.dts +++ b/arch/arm/dts/imx6ul-tqma6ul-common.dtsi @@ -1,14 +1,9 @@ - // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright 2021 Pengutronix e.K. * Author: Rouven Czerwinski */ -/dts-v1/; - -#include "imx6ul-mba6ulx.dtsi" - / { chosen { environment-sd { diff --git a/arch/arm/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/dts/imx6ul-tqma6ul2-mba6ulx.dts new file mode 100644 index 0000000000..2d49c0e763 --- /dev/null +++ b/arch/arm/dts/imx6ul-tqma6ul2-mba6ulx.dts @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +#include +#include "imx6ul-tqma6ul-common.dtsi" diff --git a/arch/arm/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/dts/imx6ul-tqma6ul2l-mba6ulx.dts new file mode 100644 index 0000000000..2d49c0e763 --- /dev/null +++ b/arch/arm/dts/imx6ul-tqma6ul2l-mba6ulx.dts @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +#include +#include "imx6ul-tqma6ul-common.dtsi" diff --git a/arch/arm/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/dts/imx6ull-tqma6ull2-mba6ulx.dts new file mode 100644 index 0000000000..20eb7a7c1d --- /dev/null +++ b/arch/arm/dts/imx6ull-tqma6ull2-mba6ulx.dts @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +#include +#include "imx6ul-tqma6ul-common.dtsi" diff --git a/arch/arm/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/dts/imx6ull-tqma6ull2l-mba6ulx.dts new file mode 100644 index 0000000000..58df3349c7 --- /dev/null +++ b/arch/arm/dts/imx6ull-tqma6ull2l-mba6ulx.dts @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +#include +#include "imx6ul-tqma6ul-common.dtsi" diff --git a/arch/arm/dts/tqma6ul-common.dtsi b/arch/arm/dts/tqma6ul-common.dtsi deleted file mode 100644 index 92b295891c..0000000000 --- a/arch/arm/dts/tqma6ul-common.dtsi +++ /dev/null @@ -1,191 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright 2018 TQ Systems GmbH - * Author: Markus Niebel - */ - -&cpu0 { - arm-supply = <®_arm>; - soc-supply = <®_soc>; -}; - -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - pfuze3000: pmic@8 { - compatible = "fsl,pfuze3000"; - reg = <0x08>; - - regulators { - reg_sw1a: sw1a { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-ramp-delay = <6250>; - /* not used */ - }; - - reg_sw1b_core: sw1b { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - reg_sw2: sw2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - reg_sw3_ddr: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_swbst: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - /* not used */ - }; - - reg_snvs_3v0: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vrefddr: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - reg_vccsd: vccsd { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - }; - - reg_v33_3v3: v33 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_vldo1_3v3: vldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - /* not used */ - }; - - reg_vldo2: vldo2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; - /* not used */ - }; - - reg_vldo3: vldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - /* not used */ - }; - - reg_vldo4: vldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-fixed; - regulator-always-on; - }; - }; - }; - - jc42_1a: eeprom-temperature-sensor@1a { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; - reg = <0x1a>; - status = "okay"; - }; - - m24c64_50: eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - pagesize = <32>; - status = "okay"; - }; - - m24c02_52: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - status = "okay"; - }; - - rtc1: rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - status = "okay"; - }; -}; - -&iomuxc { - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0 - MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0 - >; - }; - - /* - * currently not used, potentially dangerous if used on - * baseboard - */ - pinctrl_pmic: pmic { - fsl,pins = < - /* PMIC irq */ - MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 - >; - }; -}; - -&qspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - - flash0: spinor@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <33000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - reg = <0>; - }; -}; - -&snvs_rtc { - status = "disabled"; -}; - -/* eMMC */ -&usdhc2 { - pinctrl-names = "default", "state_100mhz" , "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - - bus-width = <8>; - disable-wp; - non-removable; - no-sdio; - no-sd; - status = "okay"; -}; diff --git a/arch/arm/dts/tqma6ulx-common.dtsi b/arch/arm/dts/tqma6ulx-common.dtsi deleted file mode 100644 index 3e398d25ad..0000000000 --- a/arch/arm/dts/tqma6ulx-common.dtsi +++ /dev/null @@ -1,28 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright 2018 TQ Systems GmbH - * Author: Markus Niebel - */ - -&iomuxc { - pinctrl_qspi: qspigrp { - fsl,pins = < - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70b9 - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9 - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70b9 - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70b9 - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9 - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 - >; - }; -}; - -®_sw2 { - regulator-always-on; -}; - -/* eMMC */ -&usdhc2 { - vmmc-supply = <®_sw2>; - vqmmc-supply = <®_vldo4>; -}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f7b1d88dd6..d585aa0485 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -500,6 +500,9 @@ config MACH_TQMA6UL bool "TQ tqma6ul on mba6ulx" select ARCH_IMX6UL select ARM_USE_COMPRESSED_DTB + select BOARD_TQ + select I2C + select I2C_IMX_EARLY config MACH_VARISCITE_MX6 bool "Variscite i.MX6 Quad SOM" -- 2.39.2