mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH] ARM: i.MX6: TQMa6ulx: add OP-TEE support
Date: Fri, 23 Feb 2024 13:59:22 +0100	[thread overview]
Message-ID: <20240223125922.2865359-1-s.hauer@pengutronix.de> (raw)

This adds OP-TEE support for the TQMa6ulx board. The OP-TEE binary is
loaded from PBL. Later on in barebox proper the OP-TEE provided overlay
node is applied to the barebox live tree for barebox to probe OP-TEE and
also to reserve the memory used by OP-TEE. The overlay is also
registered as a fixup to be applied on the Linux device tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/tqma6ulx/board.c              | 64 ++++++++++++++++---
 .../flash-header-imx6ul-tqma6ulx.imxcfg       |  3 +
 arch/arm/boards/tqma6ulx/lowlevel.c           | 26 +++++++-
 arch/arm/boards/tqma6ulx/tqma6ulx.h           | 14 ++++
 firmware/Kconfig                              |  5 ++
 firmware/Makefile                             |  1 +
 6 files changed, 102 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boards/tqma6ulx/tqma6ulx.h

diff --git a/arch/arm/boards/tqma6ulx/board.c b/arch/arm/boards/tqma6ulx/board.c
index 378cadc018..312bb9f585 100644
--- a/arch/arm/boards/tqma6ulx/board.c
+++ b/arch/arm/boards/tqma6ulx/board.c
@@ -12,6 +12,61 @@
 #include <of.h>
 #include <string.h>
 #include <linux/clk.h>
+#include <asm/optee.h>
+#include <asm-generic/memory_layout.h>
+
+#include "tqma6ulx.h"
+
+static const struct of_device_id mba6ulx_of_match[] = {
+	{ .compatible = "tq,imx6ul-tqma6ul2l" },
+	{ .compatible = "tq,imx6ul-tqma6ul2" },
+	{ .compatible = "tq,imx6ull-tqma6ull2" },
+	{ .compatible = "tq,imx6ull-tqma6ull2l" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mba6ulx_of_match);
+
+#ifdef CONFIG_FIRMWARE_TQMA6UL_OPTEE
+
+static int mba6ulx_optee_fixup(void)
+{
+	struct device_node *overlay;
+	struct fdt_header *fdt;
+	struct device_node *root = of_get_root_node();
+	int ret;
+
+	if (!of_match_node(mba6ulx_of_match, root))
+		return 0;
+
+	fdt = (void*)OPTEE_OVERLAY_LOCATION;
+	overlay = of_unflatten_dtb(fdt, INT_MAX);
+
+	if (IS_ERR(overlay))
+		return PTR_ERR(overlay);
+
+	/* register the overlay for fixing up the kernel device tree */
+	ret = of_register_overlay(overlay);
+	if (ret) {
+		printf("cannot apply oftree overlay: %s\n", strerror(-ret));
+		goto err;
+	}
+
+	/*
+	 * Apply the overlay to the live tree to enable OP-TEE support
+	 * for barebox and to reserve the SDRAM regions occupied by
+	 * OP-TEE
+	 */
+	of_overlay_apply_tree(root, overlay);
+
+	return 0;
+err:
+	of_delete_node(overlay);
+
+	return ret;
+}
+postcore_initcall(mba6ulx_optee_fixup);
+
+#endif
 
 static int mba6ulx_probe(struct device *dev)
 {
@@ -39,15 +94,6 @@ static int mba6ulx_probe(struct device *dev)
 	return 0;
 }
 
-static const struct of_device_id mba6ulx_of_match[] = {
-	{ .compatible = "tq,imx6ul-tqma6ul2l" },
-	{ .compatible = "tq,imx6ul-tqma6ul2" },
-	{ .compatible = "tq,imx6ull-tqma6ull2" },
-	{ .compatible = "tq,imx6ull-tqma6ull2l" },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, mba6ulx_of_match);
-
 static struct driver mba6ulx_board_driver = {
 	.name = "board-mba6ulx",
 	.probe = mba6ulx_probe,
diff --git a/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg b/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
index 9c9fb33743..ac4b853ced 100644
--- a/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
+++ b/arch/arm/boards/tqma6ulx/flash-header-imx6ul-tqma6ulx.imxcfg
@@ -99,4 +99,7 @@ wm 32 0x021B0004 0x0002552D	/* MMDC0_MDPDC now SDCTL power down enabled */
 wm 32 0x021B0404 0x00011006	/* MMDC0_MAPSR ADOPT power down enabled */
 wm 32 0x021B001C 0x00000000	/* MMDC0_MDSCR, clear this register (especially the configuration bit as initialization is complete) */
 
+/* Disable TZASC bypass */
+wm 32 0x020E4024 0x00000001
+
 #include <mach/imx/habv4-imx6-gencsf.h>
diff --git a/arch/arm/boards/tqma6ulx/lowlevel.c b/arch/arm/boards/tqma6ulx/lowlevel.c
index 909bdc532e..5fd997d2ec 100644
--- a/arch/arm/boards/tqma6ulx/lowlevel.c
+++ b/arch/arm/boards/tqma6ulx/lowlevel.c
@@ -15,6 +15,9 @@
 #include <asm/cache.h>
 #include <pbl/i2c.h>
 #include <boards/tq/tq_eeprom.h>
+#include <tee/optee.h>
+
+#include "tqma6ulx.h"
 
 extern char __dtb_z_imx6ul_tqma6ul2_mba6ulx_start[];
 extern char __dtb_z_imx6ul_tqma6ul2l_mba6ulx_start[];
@@ -63,14 +66,33 @@ static void *read_eeprom(void)
 	return fdt;
 }
 
-static void noinline start_mba6ulx(void)
+static void noinline start_mba6ulx(u32 r0)
 {
 	void *fdt;
+	int tee_size;
+	void *tee;
 
 	setup_uart();
 
 	fdt = read_eeprom();
 
+	/* Enable normal/secure r/w for TZC380 region0 */
+	writel(0xf0000000, 0x021D0108);
+
+	/*
+	 * Chainloading barebox will pass a device tree within the RAM in r0,
+	 * skip OP-TEE early loading in this case
+	 */
+	if (IS_ENABLED(CONFIG_FIRMWARE_TQMA6UL_OPTEE) &&
+	    !(r0 > MX6_MMDC_P0_BASE_ADDR &&
+	      r0 < MX6_MMDC_P0_BASE_ADDR + SZ_256M)) {
+		get_builtin_firmware(mba6ul_optee_bin, &tee, &tee_size);
+
+		memset((void *)OPTEE_OVERLAY_LOCATION, 0, 0x1000);
+
+		start_optee_early(NULL, tee);
+	}
+
 	imx6ul_barebox_entry(fdt);
 }
 
@@ -90,5 +112,5 @@ ENTRY_FUNCTION(start_imx6ul_mba6ulx, r0, r1, r2)
 	setup_c();
 	barrier();
 
-	start_mba6ulx();
+	start_mba6ulx(r0);
 }
diff --git a/arch/arm/boards/tqma6ulx/tqma6ulx.h b/arch/arm/boards/tqma6ulx/tqma6ulx.h
new file mode 100644
index 0000000000..843ad00d31
--- /dev/null
+++ b/arch/arm/boards/tqma6ulx/tqma6ulx.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * tqma6ulx.h - common defines between OP-TEE and barebox
+ *
+ * Copyright (c) 2019 Rouven Czerwinski <r.czerwinski@pengutronix.de>, Pengutronix
+ *
+ */
+#ifndef __TQMA6ULX_H_
+#define __TQMA6ULX_H_
+
+/* MX6UL_MMDC_PORT0_BASE_ADDR + SZ_64M */
+#define OPTEE_OVERLAY_LOCATION 0x84000000
+
+#endif // __TQMA6ULX_H_
diff --git a/firmware/Kconfig b/firmware/Kconfig
index 9d4be855f9..d2b1a5db03 100644
--- a/firmware/Kconfig
+++ b/firmware/Kconfig
@@ -85,6 +85,11 @@ config FIRMWARE_IMX93_OPTEE
 	  CONFIG_EXTRA_FIRMWARE_DIR/mx93a1-ahab-container.img. You can obtain it from
 	  https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-0.1.0.bin
 
+config FIRMWARE_TQMA6UL_OPTEE
+	bool
+	depends on MACH_TQMA6UL && PBL_OPTEE
+	default y
+
 config FIRMWARE_CCBV2_OPTEE
 	bool
 	depends on MACH_WEBASTO_CCBV2 && PBL_OPTEE
diff --git a/firmware/Makefile b/firmware/Makefile
index 1409d7a804..83ce77f510 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -35,6 +35,7 @@ firmware-$(CONFIG_ARCH_LAYERSCAPE_PPA) += ppa-ls1046a.bin
 fw-external-$(CONFIG_FIRMWARE_LS1028A_ATF) += ls1028a-bl31.bin
 
 pbl-firmware-$(CONFIG_FIRMWARE_CCBV2_OPTEE) += ccbv2_optee.bin
+pbl-firmware-$(CONFIG_FIRMWARE_TQMA6UL_OPTEE) += mba6ul_optee.bin
 
 # Create $(fwdir) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
 # leading /, it's relative to $(srctree).
-- 
2.39.2




                 reply	other threads:[~2024-02-23 13:01 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240223125922.2865359-1-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox