mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH master 17/23] net: usb: smsc95xx: use DMA memory for usb_control_msg
Date: Wed, 24 Apr 2024 08:40:52 +0200	[thread overview]
Message-ID: <20240424064058.3608016-18-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20240424064058.3608016-1-a.fatoum@pengutronix.de>

Iti's not safe to call usb_control_msg() with data pointing to the
stack. For some reason, this didn't blow up in our faces yet, but let's
do it properly now: Use a bounce buffer allocated with dma_alloc.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/net/usb/smsc95xx.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index b6f81cfab825..8590f4dd86b2 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -47,23 +47,25 @@ struct smsc95xx_priv {
 	u32 mac_cr;
 	int use_tx_csum;
 	int use_rx_csum;
+	__le32 *iobuf;
 };
 
 static int turbo_mode = 0;
 
 static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data)
 {
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	int ret;
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
 		USB_VENDOR_REQUEST_READ_REGISTER,
 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		00, index, data, 4, USB_CTRL_GET_TIMEOUT);
+		00, index, pdata->iobuf, 4, USB_CTRL_GET_TIMEOUT);
 
 	if (ret < 0)
 		netdev_warn(dev->net, "Failed to read register index 0x%08x\n", index);
-
-	le32_to_cpus(data);
+	else
+		*data = le32_to_cpup(pdata->iobuf);
 
 	debug("%s: 0x%08x 0x%08x\n", __func__, index, *data);
 
@@ -72,14 +74,15 @@ static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data)
 
 static int smsc95xx_write_reg(struct usbnet *dev, u32 index, u32 data)
 {
+	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	int ret;
 
-	cpu_to_le32s(&data);
+	*pdata->iobuf = cpu_to_le32(data);
 
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 		USB_VENDOR_REQUEST_WRITE_REGISTER,
 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		00, index, &data, 4, USB_CTRL_SET_TIMEOUT);
+		00, index, pdata->iobuf, 4, USB_CTRL_SET_TIMEOUT);
 
 	if (ret < 0)
 		netdev_warn(dev->net, "Failed to write register index 0x%08x\n", index);
@@ -726,6 +729,8 @@ static int smsc95xx_bind(struct usbnet *dev)
 	pdata->use_tx_csum = DEFAULT_TX_CSUM_ENABLE;
 	pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
 
+	pdata->iobuf = dma_alloc(4);
+
 	/* Init all registers */
 	ret = smsc95xx_reset(dev);
 
-- 
2.39.2




  parent reply	other threads:[~2024-04-24  7:09 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-24  6:40 [PATCH master 00/23] treewide: fix bugs using DMA API Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 01/23] habv4: use DMA-capable memory for getting event from BootROM Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 02/23] dma: give inline dma_alloc a single external definition Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 03/23] dma: add definition for dma_zalloc Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 04/23] include: linux/kernel.h: factor out alignment macros Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 05/23] driver: move out struct device definition into its own header Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 06/23] dma: remove common.h include from asm/dma.h Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 07/23] RISC-V: dma: fix dma.h inclusion Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 08/23] sandbox: dma: drop unused driver.h include Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 09/23] dma: remove linux/kernel.h dependency from dma.h Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 10/23] include: linux/slab: fix possible overflow in kmalloc_array Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 11/23] include: linux/slab: use dma_alloc for kmalloc Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 12/23] include: linux/slab: retire krealloc Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 13/23] commands: mmc_extcsd: use DMA capable memory where needed Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 14/23] net: macb: use DMA-capable memory for receive buffer Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 15/23] firmware: qemu_fw_cfg: use bounce buffer for write Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 16/23] net: usb: asix: use dma_alloc for buffers in USB control messages Ahmad Fatoum
2024-04-24  6:40 ` Ahmad Fatoum [this message]
2024-04-24  6:40 ` [PATCH master 18/23] usb: hub: use DMA memory in usb_get_port_status Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 19/23] usb: hub: use DMA-capable memory in usb_hub_configure Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 20/23] treewide: use new dma_zalloc instead of opencoding Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 21/23] usb: dwc2: host: fix mismatch between dma_map_single and unmap Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 22/23] net: bcmgenet: map DMA buffers with dma_map_single Ahmad Fatoum
2024-04-24  6:40 ` [PATCH master 23/23] dma: debug: add alignment check when mapping buffers Ahmad Fatoum
2024-04-25  7:39 ` [PATCH master 00/23] treewide: fix bugs using DMA API Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240424064058.3608016-18-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=enrico.scholz@sigma-chemnitz.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox