[PATCH] doc: bcm283x: Mention arm_64bit config.txt key

[PATCH] doc: bcm283x: Mention arm_64bit config.txt key

[Ahmad Fatoum]

Guide users into the right direction by mentioning what config.txt
key is needed to start barebox in 64-bit mode.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 Documentation/boards/bcm2835.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/bcm2835.rst b/Documentation/boards/bcm2835.rst
index f7ab723d633a..a05ae3c6f2ed 100644
--- a/Documentation/boards/bcm2835.rst
+++ b/Documentation/boards/bcm2835.rst
@@ -29,8 +29,8 @@ over SD or Ethernet on the Raspberry Pi 4.
      ``barebox.img``.
 
      For 64-bit, only ``images/barebox-raspberry-pi.img`` will be created, which is usable
-     for both Raspberry Pi 3 and Raspberry Pi 4 in 64-bit mode. No support for the Raspberry
-     Pi 5 has been contributed yet.
+     for both Raspberry Pi 3 and Raspberry Pi 4 in 64-bit mode (``arm_64bit`` in ``config.txt``).
+     No support for the Raspberry Pi 5 has been contributed yet.
 
      The ``images/barebox-raspberry-pi.img`` is expected to be the sole image for 32-bit
      also in the future. It contains the device trees of all supported (and enabled) variants
-- 
2.39.2

Re: [PATCH] doc: bcm283x: Mention arm_64bit config.txt key

[Sascha Hauer]

On Sat, 24 Aug 2024 22:03:04 +0200, Ahmad Fatoum wrote:
> Guide users into the right direction by mentioning what config.txt
> key is needed to start barebox in 64-bit mode.
> 
> 

Applied, thanks!

[1/1] doc: bcm283x: Mention arm_64bit config.txt key
      https://git.pengutronix.de/cgit/barebox/commit/?id=910555ee0825 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer@pengutronix.de>