From: Sascha Hauer <s.hauer@pengutronix.de>
To: "open list:BAREBOX" <barebox@lists.infradead.org>
Subject: [PATCH 7/7] regulator: rk808: update from kernel
Date: Tue, 15 Oct 2024 13:11:04 +0200 [thread overview]
Message-ID: <20241015-rockchip-spi-rk808-v1-7-e276b4b59603@pengutronix.de> (raw)
In-Reply-To: <20241015-rockchip-spi-rk808-v1-0-e276b4b59603@pengutronix.de>
This syncs the rk808 regulator driver with Linux-6.12-rc1. A lot has
changed in the Kernel driver which makes an incremental update hard to
do.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/regulator/rk808-regulator.c | 1085 ++++++++++++++++++++++-------------
include/linux/mfd/rk808.h | 15 +-
2 files changed, 680 insertions(+), 420 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index b361dae8cf..0a28f84fc1 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -17,6 +17,7 @@
#include <linux/regulator/of_regulator.h>
#include <regulator.h>
#include <linux/mfd/rk808.h>
+#include <linux/gpio/consumer.h>
/* Field Definitions */
#define RK808_BUCK_VSEL_MASK 0x3f
@@ -35,13 +36,47 @@
#define RK818_LDO3_ON_VSEL_MASK 0xf
#define RK818_BOOST_ON_VSEL_MASK 0xe0
+#define RK806_DCDC_SLP_REG_OFFSET 0x0A
+#define RK806_NLDO_SLP_REG_OFFSET 0x05
+#define RK806_PLDO_SLP_REG_OFFSET 0x06
+
+#define RK806_BUCK_SEL_CNT 0xff
+#define RK806_LDO_SEL_CNT 0xff
+
+/* Ramp rate definitions for buck1 / buck2 only */
+#define RK808_RAMP_RATE_OFFSET 3
+#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
+#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
+#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
+#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
+#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
+
+#define RK808_DVS2_POL BIT(2)
+#define RK808_DVS1_POL BIT(1)
+
+/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
+#define RK808_SLP_REG_OFFSET 1
+
+/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
+#define RK808_DVS_REG_OFFSET 2
+
+/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
+#define RK808_SLP_SET_OFF_REG_OFFSET 2
+
+/* max steps for increase voltage of Buck1/2, equal 100mv*/
+#define MAX_STEPS_ONE_TIME 8
+
#define ENABLE_MASK(id) (BIT(id) | BIT(4 + (id)))
#define DISABLE_VAL(id) (BIT(4 + (id)))
-#define RK817_BOOST_DESC(_supply_name, _min, _max, _step, _vreg,\
- _vmask, _ereg, _emask, _enval, _disval, _etime) \
- {{ \
- .supply_name = (_supply_name), \
+#define RK817_BOOST_DESC(_id, _match, _supply, _min, _max, _step, _vreg,\
+ _vmask, _ereg, _emask, _enval, _disval, _etime, m_drop) \
+ { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
@@ -51,14 +86,17 @@
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
- .off_on_delay = (_etime), \
.ops = &rk817_boost_ops, \
- }}
+ }
-#define RK8XX_DESC_COM(_supply_name, _min, _max, _step, _vreg, \
+#define RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _enval, _disval, _etime, _ops) \
- {{ \
- .supply_name = (_supply_name), \
+ { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
@@ -68,45 +106,89 @@
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
- .off_on_delay = (_etime), \
.ops = _ops, \
- }}
+ }
-#define RK805_DESC(_supply_name, _min, _max, _step, _vreg, \
+#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
- RK8XX_DESC_COM(_supply_name, _min, _max, _step, _vreg, \
- _vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)
+ RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, 0, 0, _etime, &rk805_reg_ops)
+
+#define RK806_REGULATOR(_name, _supply_name, _id, _ops,\
+ _n_voltages, _vr, _er, _lr, ctrl_bit,\
+ _rr, _rm, _rt)\
+[_id] = {\
+ .name = _name,\
+ .supply_name = _supply_name,\
+ .of_match = of_match_ptr(_name),\
+ .regulators_node = of_match_ptr("regulators"),\
+ .id = _id,\
+ .ops = &_ops,\
+ .n_voltages = _n_voltages,\
+ .linear_ranges = _lr,\
+ .n_linear_ranges = ARRAY_SIZE(_lr),\
+ .vsel_reg = _vr,\
+ .vsel_mask = 0xff,\
+ .enable_reg = _er,\
+ .enable_mask = ENABLE_MASK(ctrl_bit),\
+ .enable_val = ENABLE_MASK(ctrl_bit),\
+ .disable_val = DISABLE_VAL(ctrl_bit),\
+ }
-#define RK8XX_DESC(_supply_name, _min, _max, _step, _vreg, \
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
- RK8XX_DESC_COM(_supply_name, _min, _max, _step, _vreg, \
+ RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)
-#define RK817_DESC(_supply_name, _min, _max, _step, _vreg, \
+#define RK816_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _disval, _etime) \
+ RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _emask, _disval, _etime, &rk816_reg_ops)
+
+#define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _disval, _etime) \
- RK8XX_DESC_COM(_supply_name, _min, _max, _step, _vreg, \
+ RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _emask, _disval, _etime, &rk817_reg_ops)
-#define RKXX_DESC_SWITCH_COM(_supply_name,_ereg, _emask, \
+#define RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
_enval, _disval, _ops) \
- {{ \
- .supply_name = (_supply_name), \
+ { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = (_id), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
.ops = _ops \
- }}
+ }
-#define RK817_DESC_SWITCH(_supply_name, _ereg, _emask, \
+#define RK817_DESC_SWITCH(_id, _match, _supply, _ereg, _emask, \
_disval) \
- RKXX_DESC_SWITCH_COM(_supply_name, _ereg, _emask, \
+ RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
_emask, _disval, &rk817_switch_ops)
-#define RK8XX_DESC_SWITCH(_supply_name, _ereg, _emask) \
- RKXX_DESC_SWITCH_COM(_supply_name, _ereg, _emask, \
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
0, 0, &rk808_switch_ops)
+struct rk8xx_register_bit {
+ u8 reg;
+ u8 bit;
+};
+
+#define RK8XX_REG_BIT(_reg, _bit) \
+ { \
+ .reg = _reg, \
+ .bit = BIT(_bit), \
+ }
+
+struct rk808_regulator_data {
+ struct gpio_desc *dvs_gpio[2];
+};
+
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
@@ -157,11 +239,72 @@ static const struct regulator_linear_range rk817_buck3_voltage_ranges[] = {
RK817_BUCK3_SEL_CNT, RK817_BUCK1_STP1),
};
-struct rk_regulator_cfg {
- struct regulator_desc desc;
- struct regulator_dev rdev;
+static const __maybe_unused unsigned int rk808_buck1_2_ramp_table[] = {
+ 2000, 4000, 6000, 10000
+};
+
+/* RK817/RK809/RK816 (buck 1/2 only) */
+static const __maybe_unused unsigned int rk817_buck1_4_ramp_table[] = {
+ 3000, 6300, 12500, 25000
};
+static const __maybe_unused unsigned int rk806_ramp_delay_table_dcdc[] = {
+ 50000, 25000, 12500, 6250, 3125, 1560, 961, 390
+};
+
+static const __maybe_unused unsigned int rk806_ramp_delay_table_ldo[] = {
+ 100000, 50000, 25000, 12500, 6280, 3120, 1900, 780
+};
+
+static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned sel)
+{
+ int ret, delta_sel;
+ unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+ if (ret != 0)
+ return ret;
+
+ tmp = val & ~mask;
+ old_sel = val & mask;
+ old_sel >>= ffs(mask) - 1;
+ delta_sel = sel - old_sel;
+
+ /*
+ * If directly modify the register to change the voltage, we will face
+ * the risk of overshoot. Put it into a multi-step, can effectively
+ * avoid this problem, a step is 100mv here.
+ */
+ while (delta_sel > MAX_STEPS_ONE_TIME) {
+ old_sel += MAX_STEPS_ONE_TIME;
+ val = old_sel << (ffs(mask) - 1);
+ val |= tmp;
+
+ /*
+ * i2c is 400kHz (2.5us per bit) and we must transmit _at least_
+ * 3 bytes (24 bits) plus start and stop so 26 bits. So we've
+ * got more than 65 us between each voltage change and thus
+ * won't ramp faster than ~1500 uV / us.
+ */
+ ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
+ delta_sel = sel - old_sel;
+ }
+
+ sel <<= ffs(mask) - 1;
+ val = tmp | sel;
+ ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
+
+ /*
+ * When we change the voltage register directly, the ramp rate is about
+ * 100000uv/us, wait 1us to make sure the target voltage to be stable,
+ * so we needn't wait extra time after that.
+ */
+ udelay(1);
+
+ return ret;
+}
+
static int rk8xx_is_enabled_wmsk_regmap(struct regulator_dev *rdev)
{
unsigned int val;
@@ -185,15 +328,67 @@ static int rk8xx_is_enabled_wmsk_regmap(struct regulator_dev *rdev)
return val != 0;
}
-static struct regulator_ops rk808_buck1_2_ops = {
+static const struct regulator_ops rk805_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops rk805_switch_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops rk806_ops_dcdc = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = rk8xx_is_enabled_wmsk_regmap,
+};
+
+static const struct regulator_ops rk806_ops_nldo = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops rk806_ops_pldo = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
-static struct regulator_ops rk808_reg_ops = {
+static const struct regulator_ops rk808_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -203,7 +398,7 @@ static struct regulator_ops rk808_reg_ops = {
.is_enabled = regulator_is_enabled_regmap,
};
-static struct regulator_ops rk808_reg_ops_ranges = {
+static const struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -213,7 +408,7 @@ static struct regulator_ops rk808_reg_ops_ranges = {
.is_enabled = regulator_is_enabled_regmap,
};
-static struct regulator_ops rk808_switch_ops = {
+static const struct regulator_ops rk808_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -235,6 +430,36 @@ static const struct regulator_ops rk809_buck5_ops_range = {
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
};
+static const struct regulator_ops rk816_buck1_2_ops_ranges = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops rk816_buck4_ops_ranges = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops rk816_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = rk8xx_is_enabled_wmsk_regmap,
+};
+
static const struct regulator_ops rk817_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -271,10 +496,13 @@ static const struct regulator_ops rk817_switch_ops = {
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
};
-static struct rk_regulator_cfg rk805_reg[] = {
- {{
- /* .name = "DCDC_REG1", */
+static const struct regulator_desc rk805_reg[] = {
+ {
+ .name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK805_ID_DCDC1,
.ops = &rk808_reg_ops_ranges,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
@@ -283,9 +511,12 @@ static struct rk_regulator_cfg rk805_reg[] = {
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(0),
- }}, {{
- /* .name = "DCDC_REG2", */
+ }, {
+ .name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK805_ID_DCDC2,
.ops = &rk808_reg_ops_ranges,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
@@ -294,35 +525,146 @@ static struct rk_regulator_cfg rk805_reg[] = {
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(1),
- }}, {{
- /* .name = "DCDC_REG3", */
+ }, {
+ .name = "DCDC_REG3",
.supply_name = "vcc3",
- .ops = &rk808_switch_ops,
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK805_ID_DCDC3,
+ .ops = &rk805_switch_ops,
.n_voltages = 1,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(2),
- }},
+ },
- RK805_DESC(/* "DCDC_REG4", */ "vcc4", 800, 3400, 100,
+ RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK805_DCDC_EN_REG, BIT(3), 0),
- RK805_DESC(/* "LDO_REG1", */ "vcc5", 800, 3400, 100,
+ RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(0), 400),
- RK805_DESC(/* "LDO_REG2", */ "vcc5", 800, 3400, 100,
+ RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(1), 400),
- RK805_DESC(/* "LDO_REG3", */ "vcc6", 800, 3400, 100,
+ RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(2), 400),
};
-static_assert(ARRAY_SIZE(rk805_reg) == RK805_NUM_REGULATORS);
-static struct rk_regulator_cfg rk808_reg[] = {
- {{
- /* .name = "DCDC_REG1", */
+static const struct regulator_linear_range rk806_buck_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 159, 6250), /* 500mV ~ 1500mV */
+ REGULATOR_LINEAR_RANGE(1500000, 160, 235, 25000), /* 1500mV ~ 3400mV */
+ REGULATOR_LINEAR_RANGE(3400000, 236, 255, 0),
+};
+
+static const struct regulator_linear_range rk806_ldo_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 231, 12500), /* 500mV ~ 3400mV */
+ REGULATOR_LINEAR_RANGE(3400000, 232, 255, 0),
+};
+
+static const struct regulator_desc rk806_reg[] = {
+ RK806_REGULATOR("dcdc-reg1", "vcc1", RK806_ID_DCDC1, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK1_ON_VSEL,
+ RK806_POWER_EN0, rk806_buck_voltage_ranges, 0,
+ RK806_BUCK1_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+ RK806_REGULATOR("dcdc-reg2", "vcc2", RK806_ID_DCDC2, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK2_ON_VSEL,
+ RK806_POWER_EN0, rk806_buck_voltage_ranges, 1,
+ RK806_BUCK2_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+ RK806_REGULATOR("dcdc-reg3", "vcc3", RK806_ID_DCDC3, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK3_ON_VSEL,
+ RK806_POWER_EN0, rk806_buck_voltage_ranges, 2,
+ RK806_BUCK3_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+ RK806_REGULATOR("dcdc-reg4", "vcc4", RK806_ID_DCDC4, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK4_ON_VSEL,
+ RK806_POWER_EN0, rk806_buck_voltage_ranges, 3,
+ RK806_BUCK4_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+
+ RK806_REGULATOR("dcdc-reg5", "vcc5", RK806_ID_DCDC5, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK5_ON_VSEL,
+ RK806_POWER_EN1, rk806_buck_voltage_ranges, 0,
+ RK806_BUCK5_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+ RK806_REGULATOR("dcdc-reg6", "vcc6", RK806_ID_DCDC6, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK6_ON_VSEL,
+ RK806_POWER_EN1, rk806_buck_voltage_ranges, 1,
+ RK806_BUCK6_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+ RK806_REGULATOR("dcdc-reg7", "vcc7", RK806_ID_DCDC7, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK7_ON_VSEL,
+ RK806_POWER_EN1, rk806_buck_voltage_ranges, 2,
+ RK806_BUCK7_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+ RK806_REGULATOR("dcdc-reg8", "vcc8", RK806_ID_DCDC8, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK8_ON_VSEL,
+ RK806_POWER_EN1, rk806_buck_voltage_ranges, 3,
+ RK806_BUCK8_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+
+ RK806_REGULATOR("dcdc-reg9", "vcc9", RK806_ID_DCDC9, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK9_ON_VSEL,
+ RK806_POWER_EN2, rk806_buck_voltage_ranges, 0,
+ RK806_BUCK9_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+ RK806_REGULATOR("dcdc-reg10", "vcc10", RK806_ID_DCDC10, rk806_ops_dcdc,
+ RK806_BUCK_SEL_CNT, RK806_BUCK10_ON_VSEL,
+ RK806_POWER_EN2, rk806_buck_voltage_ranges, 1,
+ RK806_BUCK10_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+
+ RK806_REGULATOR("nldo-reg1", "vcc13", RK806_ID_NLDO1, rk806_ops_nldo,
+ RK806_LDO_SEL_CNT, RK806_NLDO1_ON_VSEL,
+ RK806_POWER_EN3, rk806_ldo_voltage_ranges, 0,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+ RK806_REGULATOR("nldo-reg2", "vcc13", RK806_ID_NLDO2, rk806_ops_nldo,
+ RK806_LDO_SEL_CNT, RK806_NLDO2_ON_VSEL,
+ RK806_POWER_EN3, rk806_ldo_voltage_ranges, 1,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+ RK806_REGULATOR("nldo-reg3", "vcc13", RK806_ID_NLDO3, rk806_ops_nldo,
+ RK806_LDO_SEL_CNT, RK806_NLDO3_ON_VSEL,
+ RK806_POWER_EN3, rk806_ldo_voltage_ranges, 2,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+ RK806_REGULATOR("nldo-reg4", "vcc14", RK806_ID_NLDO4, rk806_ops_nldo,
+ RK806_LDO_SEL_CNT, RK806_NLDO4_ON_VSEL,
+ RK806_POWER_EN3, rk806_ldo_voltage_ranges, 3,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+ RK806_REGULATOR("nldo-reg5", "vcc14", RK806_ID_NLDO5, rk806_ops_nldo,
+ RK806_LDO_SEL_CNT, RK806_NLDO5_ON_VSEL,
+ RK806_POWER_EN5, rk806_ldo_voltage_ranges, 2,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+ RK806_REGULATOR("pldo-reg1", "vcc11", RK806_ID_PLDO1, rk806_ops_pldo,
+ RK806_LDO_SEL_CNT, RK806_PLDO1_ON_VSEL,
+ RK806_POWER_EN4, rk806_ldo_voltage_ranges, 1,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+ RK806_REGULATOR("pldo-reg2", "vcc11", RK806_ID_PLDO2, rk806_ops_pldo,
+ RK806_LDO_SEL_CNT, RK806_PLDO2_ON_VSEL,
+ RK806_POWER_EN4, rk806_ldo_voltage_ranges, 2,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+ RK806_REGULATOR("pldo-reg3", "vcc11", RK806_ID_PLDO3, rk806_ops_pldo,
+ RK806_LDO_SEL_CNT, RK806_PLDO3_ON_VSEL,
+ RK806_POWER_EN4, rk806_ldo_voltage_ranges, 3,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+ RK806_REGULATOR("pldo-reg4", "vcc12", RK806_ID_PLDO4, rk806_ops_pldo,
+ RK806_LDO_SEL_CNT, RK806_PLDO4_ON_VSEL,
+ RK806_POWER_EN5, rk806_ldo_voltage_ranges, 0,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+ RK806_REGULATOR("pldo-reg5", "vcc12", RK806_ID_PLDO5, rk806_ops_pldo,
+ RK806_LDO_SEL_CNT, RK806_PLDO5_ON_VSEL,
+ RK806_POWER_EN5, rk806_ldo_voltage_ranges, 1,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+ RK806_REGULATOR("pldo-reg6", "vcca", RK806_ID_PLDO6, rk806_ops_pldo,
+ RK806_LDO_SEL_CNT, RK806_PLDO6_ON_VSEL,
+ RK806_POWER_EN4, rk806_ldo_voltage_ranges, 0,
+ 0xEA, 0x38, rk806_ramp_delay_table_ldo),
+};
+
+
+static const struct regulator_desc rk808_reg[] = {
+ {
+ .name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.min_uV = 712500,
.uV_step = 12500,
@@ -331,9 +673,12 @@ static struct rk_regulator_cfg rk808_reg[] = {
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(0),
- }}, {{
- /* .name = "DCDC_REG2", */
+ }, {
+ .name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.min_uV = 712500,
.uV_step = 12500,
@@ -342,51 +687,32 @@ static struct rk_regulator_cfg rk808_reg[] = {
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(1),
- }}, {{
- /* .name = "DCDC_REG3", */
+ }, {
+ .name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.n_voltages = 1,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
- }}, {{
- /* .name = "DCDC_REG4", */
- .supply_name = "vcc4",
- .ops = &rk808_reg_ops,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 16,
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- }}, {{
- /* .name = "LDO_REG1", */
- .supply_name = "vcc6",
- .ops = &rk808_reg_ops,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .off_on_delay = 400,
- }}, {{
- /* .name = "LDO_REG2", */
- .supply_name = "vcc6",
- .ops = &rk808_reg_ops,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .off_on_delay = 400,
- }}, {{
- /* .name = "LDO_REG3", */
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
+ .name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK808_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -395,87 +721,35 @@ static struct rk_regulator_cfg rk808_reg[] = {
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
.enable_mask = BIT(2),
- .off_on_delay = 400,
- }}, {{
- /* .name = "LDO_REG4", */
- .supply_name = "vcc9",
- .ops = &rk808_reg_ops,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .off_on_delay = 400,
- }}, {{
- /* .name = "LDO_REG5", */
- .supply_name = "vcc9",
- .ops = &rk808_reg_ops,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .off_on_delay = 400,
- }}, {{
- /* .name = "LDO_REG6", */
- .supply_name = "vcc10",
- .ops = &rk808_reg_ops,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .off_on_delay = 400,
- }}, {{
- /* .name = "LDO_REG7", */
- .supply_name = "vcc7",
- .ops = &rk808_reg_ops,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .off_on_delay = 400,
- }}, {{
- /* .name = "LDO_REG8", */
- .supply_name = "vcc11",
- .ops = &rk808_reg_ops,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
- .off_on_delay = 400,
- }}, {{
- /* .name = "SWITCH_REG1", */
- .supply_name = "vcc8",
- .ops = &rk808_switch_ops,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- }}, {{
- /* .name = "SWITCH_REG2", */
- .supply_name = "vcc12",
- .ops = &rk808_switch_ops,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- }},
+ },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
};
-static_assert(ARRAY_SIZE(rk808_reg) == RK808_NUM_REGULATORS);
-static struct rk_regulator_cfg rk809_reg[] = {
- {{
- /* .name = "DCDC_REG1", */
+static const struct regulator_desc rk809_reg[] = {
+ {
+ .name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC1,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
@@ -486,9 +760,12 @@ static struct rk_regulator_cfg rk809_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
- }}, {{
- /* .name = "DCDC_REG2", */
+ }, {
+ .name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC2,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
@@ -499,9 +776,12 @@ static struct rk_regulator_cfg rk809_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
- }}, {{
- /* .name = "DCDC_REG3", */
+ }, {
+ .name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC3,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
@@ -512,9 +792,12 @@ static struct rk_regulator_cfg rk809_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
- }}, {{
- /* .name = "DCDC_REG4", */
+ }, {
+ .name = "DCDC_REG4",
.supply_name = "vcc4",
+ .of_match = of_match_ptr("DCDC_REG4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC4,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
.linear_ranges = rk817_buck3_voltage_ranges,
@@ -525,68 +808,166 @@ static struct rk_regulator_cfg rk809_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
- }},
- RK817_DESC(/* "LDO_REG1", */ "vcc5", 600, 3400, 25,
+ },
+ {
+ .name = "DCDC_REG5",
+ .supply_name = "vcc9",
+ .of_match = of_match_ptr("DCDC_REG5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK809_ID_DCDC5,
+ .ops = &rk809_buck5_ops_range,
+ .n_voltages = RK809_BUCK5_SEL_CNT,
+ .linear_ranges = rk809_buck5_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
+ .vsel_reg = RK809_BUCK5_CONFIG(0),
+ .vsel_mask = RK809_BUCK5_VSEL_MASK,
+ .enable_reg = RK817_POWER_EN_REG(3),
+ .enable_mask = ENABLE_MASK(1),
+ .enable_val = ENABLE_MASK(1),
+ .disable_val = DISABLE_VAL(1),
+ },
+ RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
- RK817_DESC(/* "LDO_REG2", */ "vcc5", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
- RK817_DESC(/* "LDO_REG3", */ "vcc5", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
- RK817_DESC(/* "LDO_REG4", */ "vcc6", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
- RK817_DESC(/* "LDO_REG5", */ "vcc6", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
- RK817_DESC(/* "LDO_REG6", */ "vcc6", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
- RK817_DESC(/* "LDO_REG7", */ "vcc7", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
- RK817_DESC(/* "LDO_REG8", */ "vcc7", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
- RK817_DESC(/* "LDO_REG9", */ "vcc7", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
- {{
- /* .name = "DCDC_REG5", */
- .supply_name = "vcc9",
- .ops = &rk809_buck5_ops_range,
- .n_voltages = RK809_BUCK5_SEL_CNT,
- .linear_ranges = rk809_buck5_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
- .vsel_reg = RK809_BUCK5_CONFIG(0),
- .vsel_mask = RK809_BUCK5_VSEL_MASK,
- .enable_reg = RK817_POWER_EN_REG(3),
- .enable_mask = ENABLE_MASK(1),
- .enable_val = ENABLE_MASK(1),
- .disable_val = DISABLE_VAL(1),
- }},
- RK817_DESC_SWITCH(/* "SWITCH_REG1", */ "vcc9",
- RK817_POWER_EN_REG(3), ENABLE_MASK(2), DISABLE_VAL(2)),
- RK817_DESC_SWITCH(/* "SWITCH_REG2", */ "vcc8",
- RK817_POWER_EN_REG(3), ENABLE_MASK(3), DISABLE_VAL(3)),
+ RK817_DESC_SWITCH(RK809_ID_SW1, "SWITCH_REG1", "vcc9",
+ RK817_POWER_EN_REG(3), ENABLE_MASK(2),
+ DISABLE_VAL(2)),
+ RK817_DESC_SWITCH(RK809_ID_SW2, "SWITCH_REG2", "vcc8",
+ RK817_POWER_EN_REG(3), ENABLE_MASK(3),
+ DISABLE_VAL(3)),
};
-static_assert(ARRAY_SIZE(rk809_reg) == RK809_NUM_REGULATORS);
-static struct rk_regulator_cfg rk817_reg[] = {
- {{
- /* .name = "DCDC_REG1", */
+static const struct regulator_linear_range rk816_buck_4_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0, 26, 100000),
+ REGULATOR_LINEAR_RANGE(3500000, 27, 31, 0),
+};
+
+static const struct regulator_desc rk816_reg[] = {
+ {
+ .name = "dcdc1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("dcdc1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC1,
+ .ops = &rk816_buck1_2_ops_ranges,
+ .n_voltages = 64,
+ .linear_ranges = rk805_buck_1_2_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
+ .vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .apply_reg = RK816_DCDC_EN_REG2,
+ .apply_bit = RK816_BUCK_DVS_CONFIRM,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(4) | BIT(0),
+ .enable_val = BIT(4) | BIT(0),
+ .disable_val = BIT(4),
+ }, {
+ .name = "dcdc2",
+ .supply_name = "vcc2",
+ .of_match = of_match_ptr("dcdc2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC2,
+ .ops = &rk816_buck1_2_ops_ranges,
+ .n_voltages = 64,
+ .linear_ranges = rk805_buck_1_2_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
+ .vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .apply_reg = RK816_DCDC_EN_REG2,
+ .apply_bit = RK816_BUCK_DVS_CONFIRM,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(5) | BIT(1),
+ .enable_val = BIT(5) | BIT(1),
+ .disable_val = BIT(5),
+ }, {
+ .name = "dcdc3",
+ .supply_name = "vcc3",
+ .of_match = of_match_ptr("dcdc3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC3,
+ .ops = &rk808_switch_ops,
+ .n_voltages = 1,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(6) | BIT(2),
+ .enable_val = BIT(6) | BIT(2),
+ .disable_val = BIT(6),
+ }, {
+ .name = "dcdc4",
+ .supply_name = "vcc4",
+ .of_match = of_match_ptr("dcdc4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK816_ID_DCDC4,
+ .ops = &rk816_buck4_ops_ranges,
+ .n_voltages = 32,
+ .linear_ranges = rk816_buck_4_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk816_buck_4_voltage_ranges),
+ .vsel_reg = RK818_BUCK4_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK4_VSEL_MASK,
+ .enable_reg = RK816_DCDC_EN_REG1,
+ .enable_mask = BIT(7) | BIT(3),
+ .enable_val = BIT(7) | BIT(3),
+ .disable_val = BIT(7),
+ },
+ RK816_DESC(RK816_ID_LDO1, "ldo1", "vcc5", 800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(0), DISABLE_VAL(0), 400),
+ RK816_DESC(RK816_ID_LDO2, "ldo2", "vcc5", 800, 3400, 100,
+ RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(1), DISABLE_VAL(1), 400),
+ RK816_DESC(RK816_ID_LDO3, "ldo3", "vcc5", 800, 3400, 100,
+ RK818_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(2), DISABLE_VAL(2), 400),
+ RK816_DESC(RK816_ID_LDO4, "ldo4", "vcc6", 800, 3400, 100,
+ RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG1, ENABLE_MASK(3), DISABLE_VAL(3), 400),
+ RK816_DESC(RK816_ID_LDO5, "ldo5", "vcc6", 800, 3400, 100,
+ RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG2, ENABLE_MASK(0), DISABLE_VAL(0), 400),
+ RK816_DESC(RK816_ID_LDO6, "ldo6", "vcc6", 800, 3400, 100,
+ RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK816_LDO_EN_REG2, ENABLE_MASK(1), DISABLE_VAL(1), 400),
+};
+
+static const struct regulator_desc rk817_reg[] = {
+ {
+ .name = "DCDC_REG1",
+ .supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC1,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
@@ -597,9 +978,12 @@ static struct rk_regulator_cfg rk817_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
- }}, {{
- /* .name = "DCDC_REG2", */
+ }, {
+ .name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC2,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
@@ -610,9 +994,12 @@ static struct rk_regulator_cfg rk817_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
- }}, {{
- /* .name = "DCDC_REG3", */
+ }, {
+ .name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC3,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
@@ -623,9 +1010,12 @@ static struct rk_regulator_cfg rk817_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
- }}, {{
- /* .name = "DCDC_REG4", */
+ }, {
+ .name = "DCDC_REG4",
.supply_name = "vcc4",
+ .of_match = of_match_ptr("DCDC_REG4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK817_ID_DCDC4,
.ops = &rk817_buck_ops_range,
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
.linear_ranges = rk817_buck3_voltage_ranges,
@@ -636,56 +1026,59 @@ static struct rk_regulator_cfg rk817_reg[] = {
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
- }},
- RK817_DESC(/* "LDO_REG1", */ "vcc5", 600, 3400, 25,
+ },
+ RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
- RK817_DESC(/* "LDO_REG2", */ "vcc5", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
- RK817_DESC(/* "LDO_REG3", */ "vcc5", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
- RK817_DESC(/* "LDO_REG4", */ "vcc6", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
- RK817_DESC(/* "LDO_REG5", */ "vcc6", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
- RK817_DESC(/* "LDO_REG6", */ "vcc6", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
- RK817_DESC(/* "LDO_REG7", */ "vcc7", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
- RK817_DESC(/* "LDO_REG8", */ "vcc7", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
- RK817_DESC(/* "LDO_REG9", */ "vcc7", 600, 3400, 25,
+ RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
- RK817_BOOST_DESC(/* "BOOST", */ "vcc8", 4700, 5400, 100,
+ RK817_BOOST_DESC(RK817_ID_BOOST, "BOOST", "vcc8", 4700, 5400, 100,
RK817_BOOST_OTG_CFG, RK817_BOOST_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(1), ENABLE_MASK(1),
- DISABLE_VAL(1), 400),
- RK817_DESC_SWITCH(/* "OTG_SWITCH", */ "vcc9",
- RK817_POWER_EN_REG(3), ENABLE_MASK(2), DISABLE_VAL(2)),
+ DISABLE_VAL(1), 400, 3500 - 5400),
+ RK817_DESC_SWITCH(RK817_ID_BOOST_OTG_SW, "OTG_SWITCH", "vcc9",
+ RK817_POWER_EN_REG(3), ENABLE_MASK(2),
+ DISABLE_VAL(2)),
};
-static_assert(ARRAY_SIZE(rk817_reg) == RK817_NUM_REGULATORS);
-static struct rk_regulator_cfg rk818_reg[] = {
- {{
- /* .name = "DCDC_REG1", */
+static const struct regulator_desc rk818_reg[] = {
+ {
+ .name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC1,
.ops = &rk808_reg_ops,
.min_uV = 712500,
.uV_step = 12500,
@@ -694,9 +1087,12 @@ static struct rk_regulator_cfg rk818_reg[] = {
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(0),
- }}, {{
- /* .name = "DCDC_REG2", */
+ }, {
+ .name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC2,
.ops = &rk808_reg_ops,
.min_uV = 712500,
.uV_step = 12500,
@@ -705,29 +1101,35 @@ static struct rk_regulator_cfg rk818_reg[] = {
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(1),
- }}, {{
- /* .name = "DCDC_REG3", */
+ }, {
+ .name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC3,
.ops = &rk808_switch_ops,
.n_voltages = 1,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(2),
- }},
- RK8XX_DESC(/* "DCDC_REG4", */ "vcc4", 1800, 3600, 100,
+ },
+ RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(3), 0),
- RK8XX_DESC(/* "DCDC_BOOST", */ "boost", 4700, 5400, 100,
+ RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(4), 0),
- RK8XX_DESC(/* "LDO_REG1", */ "vcc6", 1800, 3400, 100,
+ RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(0), 400),
- RK8XX_DESC(/* "LDO_REG2", */ "vcc6", 1800, 3400, 100,
+ RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(1), 400),
- {{
- /* .name = "LDO_REG3", */
+ {
+ .name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -736,214 +1138,85 @@ static struct rk_regulator_cfg rk818_reg[] = {
.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
.enable_reg = RK818_LDO_EN_REG,
.enable_mask = BIT(2),
- .off_on_delay = 400,
- }},
- RK8XX_DESC(/* "LDO_REG4", */ "vcc8", 1800, 3400, 100,
+ },
+ RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(3), 400),
- RK8XX_DESC(/* "LDO_REG5", */ "vcc7", 1800, 3400, 100,
+ RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(4), 400),
- RK8XX_DESC(/* "LDO_REG6", */ "vcc8", 800, 2500, 100,
+ RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(5), 400),
- RK8XX_DESC(/* "LDO_REG7", */ "vcc7", 800, 2500, 100,
+ RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(6), 400),
- RK8XX_DESC(/* "LDO_REG8", */ "vcc8", 1800, 3400, 100,
+ RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(7), 400),
- RK8XX_DESC(/* "LDO_REG9", */ "vcc9", 1800, 3400, 100,
+ RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(5), 400),
- RK8XX_DESC_SWITCH(/* "SWITCH_REG", */ "vcc9",
- RK818_DCDC_EN_REG, BIT(6)),
- RK8XX_DESC_SWITCH(/* "HDMI_SWITCH", */ "h_5v",
- RK818_H5V_EN_REG, BIT(0)),
- RK8XX_DESC_SWITCH(/* "OTG_SWITCH", */ "usb",
- RK818_DCDC_EN_REG, BIT(7)),
-};
-static_assert(ARRAY_SIZE(rk818_reg) == RK818_NUM_REGULATORS);
-
-static int rk808_regulator_register(struct rk808 *rk808, int id,
- struct of_regulator_match *match,
- struct rk_regulator_cfg *cfg)
-{
- struct device *dev = rk808->dev;
- int ret;
-
- if (!match->of_node) {
- dev_dbg(dev, "Skip missing DTB regulator %s", match->name);
- return 0;
- }
-
- cfg->rdev.desc = &cfg->desc;
- cfg->rdev.dev = dev;
- cfg->rdev.regmap = rk808->regmap;
-
- ret = of_regulator_register(&cfg->rdev, match->of_node);
- if (ret)
- return dev_err_probe(dev, ret, "failed to register %s regulator\n",
- match->name);
-
- dev_dbg(dev, "registered %s\n", match->name);
-
- return 0;
-}
-
-#define MATCH(variant, _name, _id) [RK##variant##_ID_##_id] = \
- { .name = #_name, .desc = &rk##variant##_reg[RK##variant##_ID_##_id].desc }
-
-static struct of_regulator_match rk805_reg_matches[] = {
- MATCH(805, DCDC_REG1, DCDC1),
- MATCH(805, DCDC_REG2, DCDC2),
- MATCH(805, DCDC_REG3, DCDC3),
- MATCH(805, DCDC_REG4, DCDC4),
- MATCH(805, LDO_REG1, LDO1),
- MATCH(805, LDO_REG2, LDO2),
- MATCH(805, LDO_REG3, LDO3),
-};
-static_assert(ARRAY_SIZE(rk805_reg_matches) == RK805_NUM_REGULATORS);
-
-static struct of_regulator_match rk808_reg_matches[] = {
- MATCH(808, DCDC_REG1, DCDC1),
- MATCH(808, DCDC_REG2, DCDC2),
- MATCH(808, DCDC_REG3, DCDC3),
- MATCH(808, DCDC_REG4, DCDC4),
- MATCH(808, LDO_REG1, LDO1),
- MATCH(808, LDO_REG2, LDO2),
- MATCH(808, LDO_REG3, LDO3),
- MATCH(808, LDO_REG4, LDO4),
- MATCH(808, LDO_REG5, LDO5),
- MATCH(808, LDO_REG6, LDO6),
- MATCH(808, LDO_REG7, LDO7),
- MATCH(808, LDO_REG8, LDO8),
- MATCH(808, SWITCH_REG1, SWITCH1),
- MATCH(808, SWITCH_REG2, SWITCH2),
-};
-static_assert(ARRAY_SIZE(rk808_reg_matches) == RK808_NUM_REGULATORS);
-
-static struct of_regulator_match rk809_reg_matches[] = {
- MATCH(809, DCDC_REG1, DCDC1),
- MATCH(809, DCDC_REG2, DCDC2),
- MATCH(809, DCDC_REG3, DCDC3),
- MATCH(809, DCDC_REG4, DCDC4),
- MATCH(809, LDO_REG1, LDO1),
- MATCH(809, LDO_REG2, LDO2),
- MATCH(809, LDO_REG3, LDO3),
- MATCH(809, LDO_REG4, LDO4),
- MATCH(809, LDO_REG5, LDO5),
- MATCH(809, LDO_REG6, LDO6),
- MATCH(809, LDO_REG7, LDO7),
- MATCH(809, LDO_REG8, LDO8),
- MATCH(809, LDO_REG9, LDO9),
- MATCH(809, DCDC_REG5, DCDC5),
- MATCH(809, SWITCH_REG1, SW1),
- MATCH(809, SWITCH_REG2, SW2),
-};
-static_assert(ARRAY_SIZE(rk809_reg_matches) == RK809_NUM_REGULATORS);
-
-static struct of_regulator_match rk817_reg_matches[] = {
- MATCH(817, DCDC_REG1, DCDC1),
- MATCH(817, DCDC_REG2, DCDC2),
- MATCH(817, DCDC_REG3, DCDC3),
- MATCH(817, DCDC_REG4, DCDC4),
- MATCH(817, LDO_REG1, LDO1),
- MATCH(817, LDO_REG2, LDO2),
- MATCH(817, LDO_REG3, LDO3),
- MATCH(817, LDO_REG4, LDO4),
- MATCH(817, LDO_REG5, LDO5),
- MATCH(817, LDO_REG6, LDO6),
- MATCH(817, LDO_REG7, LDO7),
- MATCH(817, LDO_REG8, LDO8),
- MATCH(817, LDO_REG9, LDO9),
- MATCH(817, BOOST, BOOST),
- MATCH(817, OTG_SWITCH, BOOST_OTG_SW),
-};
-static_assert(ARRAY_SIZE(rk817_reg_matches) == RK817_NUM_REGULATORS);
-
-static struct of_regulator_match rk818_reg_matches[] = {
- MATCH(818, DCDC_REG1, DCDC1),
- MATCH(818, DCDC_REG2, DCDC2),
- MATCH(818, DCDC_REG3, DCDC3),
- MATCH(818, DCDC_REG4, DCDC4),
- MATCH(818, DCDC_BOOST, BOOST),
- MATCH(818, LDO_REG1, LDO1),
- MATCH(818, LDO_REG2, LDO2),
- MATCH(818, LDO_REG3, LDO3),
- MATCH(818, LDO_REG4, LDO4),
- MATCH(818, LDO_REG5, LDO5),
- MATCH(818, LDO_REG6, LDO6),
- MATCH(818, LDO_REG7, LDO7),
- MATCH(818, LDO_REG8, LDO8),
- MATCH(818, LDO_REG9, LDO9),
- MATCH(818, SWITCH_REG, SWITCH),
- MATCH(818, HDMI_SWITCH, HDMI_SWITCH),
- MATCH(818, OTG_SWITCH, OTG_SWITCH),
-};
-static_assert(ARRAY_SIZE(rk818_reg_matches) == RK818_NUM_REGULATORS);
-
-static int rk808_regulator_dt_parse(struct device *dev,
- struct of_regulator_match *matches,
- int nregulators)
-{
- struct device_node *np = dev->of_node;
-
- np = of_get_child_by_name(np, "regulators");
- if (!np)
- return -ENOENT;
-
- return of_regulator_match(dev, np, matches, nregulators);
-}
+ RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
+ RK818_DCDC_EN_REG, BIT(6)),
+ RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
+ RK818_H5V_EN_REG, BIT(0)),
+ RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
+ RK818_DCDC_EN_REG, BIT(7)),
+};
static int rk808_regulator_probe(struct device *dev)
{
struct rk808 *rk808 = dev->parent->priv;
- struct rk_regulator_cfg *regulators;
- struct of_regulator_match *matches;
- int ret, i, nregulators;
+ struct regulator_dev *rk808_rdev;
+ const struct regulator_desc *regulators;
+ int i, nregulators;
+ struct regulator_config config;
switch (rk808->variant) {
case RK805_ID:
regulators = rk805_reg;
- matches = rk805_reg_matches;
nregulators = RK805_NUM_REGULATORS;
break;
+ case RK806_ID:
+ regulators = rk806_reg;
+ nregulators = ARRAY_SIZE(rk806_reg);
+ break;
case RK808_ID:
regulators = rk808_reg;
- matches = rk808_reg_matches;
- nregulators = RK809_NUM_REGULATORS;
+ nregulators = RK808_NUM_REGULATORS;
break;
case RK809_ID:
regulators = rk809_reg;
- matches = rk809_reg_matches;
nregulators = RK809_NUM_REGULATORS;
break;
+ case RK816_ID:
+ regulators = rk816_reg;
+ nregulators = ARRAY_SIZE(rk816_reg);
+ break;
case RK817_ID:
regulators = rk817_reg;
- matches = rk817_reg_matches;
nregulators = RK817_NUM_REGULATORS;
break;
case RK818_ID:
regulators = rk818_reg;
- matches = rk818_reg_matches;
nregulators = RK818_NUM_REGULATORS;
break;
default:
- dev_err(dev, "unsupported RK8XX ID %lu\n", rk808->variant);
+ dev_err(dev, "unsupported RK8XX ID %lu\n",
+ rk808->variant);
return -EINVAL;
}
- ret = rk808_regulator_dt_parse(rk808->dev, matches, nregulators);
- if (ret < 0)
- return ret;
+ config.dev = dev;
+ config.regmap = rk808->regmap;
/* Instantiate the regulators */
for (i = 0; i < nregulators; i++) {
- ret = rk808_regulator_register(rk808, i, &matches[i],
- ®ulators[i]);
- if (ret < 0)
- return ret;
+ rk808_rdev = regulator_register(rk808->dev, ®ulators[i], &config);
+ if (IS_ERR(rk808_rdev))
+ return dev_err_probe(dev, PTR_ERR(rk808_rdev),
+ "failed to register %d regulator\n", i);
}
return 0;
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 8cd152625b..8f94103c82 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -964,20 +964,7 @@ enum rk817_reg_id {
};
enum rk809_reg_id {
- RK809_ID_DCDC1 = 0,
- RK809_ID_DCDC2,
- RK809_ID_DCDC3,
- RK809_ID_DCDC4,
- RK809_ID_LDO1,
- RK809_ID_LDO2,
- RK809_ID_LDO3,
- RK809_ID_LDO4,
- RK809_ID_LDO5,
- RK809_ID_LDO6,
- RK809_ID_LDO7,
- RK809_ID_LDO8,
- RK809_ID_LDO9,
- RK809_ID_DCDC5,
+ RK809_ID_DCDC5 = RK817_ID_BOOST,
RK809_ID_SW1,
RK809_ID_SW2,
RK809_NUM_REGULATORS
--
2.39.5
next prev parent reply other threads:[~2024-10-15 11:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 11:10 [PATCH 0/7] rockchip: add RK808 support Sascha Hauer
2024-10-15 11:10 ` [PATCH 1/7] spi: add rockchip spi controller support Sascha Hauer
2024-10-31 6:05 ` Alexander Shiyan
2024-10-31 11:26 ` Sascha Hauer
2024-10-15 11:10 ` [PATCH 2/7] mfd: mx13xxx: drop unnecessary ifdefs Sascha Hauer
2024-10-15 11:11 ` [PATCH 3/7] mfd: rk808: factor out common probe function Sascha Hauer
2024-10-15 11:11 ` [PATCH 4/7] mfd: rk808: update header file from kernel Sascha Hauer
2024-10-15 11:11 ` [PATCH 5/7] mfd: rk808: add support for RK806 Sascha Hauer
2024-10-15 14:46 ` Alexander Shiyan
2024-10-16 7:07 ` Alexander Shiyan
2024-10-16 9:01 ` Sascha Hauer
2024-10-16 9:11 ` Alexander Shiyan
2024-10-16 9:13 ` Alexander Shiyan
2024-10-16 10:48 ` Sascha Hauer
2024-10-16 16:08 ` Alexander Shiyan
2024-10-17 11:05 ` Sascha Hauer
2024-10-18 5:12 ` Alexander Shiyan
2024-10-18 8:42 ` Sascha Hauer
2024-10-15 11:11 ` [PATCH 6/7] regulator: add regulator_register() Sascha Hauer
2024-10-15 11:11 ` Sascha Hauer [this message]
2024-10-18 8:39 ` [PATCH 0/7] rockchip: add RK808 support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241015-rockchip-spi-rk808-v1-7-e276b4b59603@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox