[PATCH 3/6] clk: Add clock driver for sun50i-a64

[Jules Maselbas <jmaselbas@zdiv.net>]

Clock driver adapted from Linux.
The pll-cpux is set to 816MHz and pll-periph0-2x is set to 1.2GHz.

Signed-off-by: Jules Maselbas <jmaselbas@zdiv.net>
---
 drivers/clk/Makefile               |   1 +
 drivers/clk/sunxi/Makefile         |   2 +
 drivers/clk/sunxi/clk-sun50i-a64.c | 325 +++++++++++++++++++++++++++++
 drivers/clk/sunxi/clk-sun50i-a64.h |  62 ++++++
 4 files changed, 390 insertions(+)
 create mode 100644 drivers/clk/sunxi/Makefile
 create mode 100644 drivers/clk/sunxi/clk-sun50i-a64.c
 create mode 100644 drivers/clk/sunxi/clk-sun50i-a64.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 764539e91e..7d459c298e 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -31,3 +31,4 @@ obj-y				+= bcm/
 obj-$(CONFIG_COMMON_CLK_SCMI)	+= clk-scmi.o
 obj-$(CONFIG_COMMON_CLK_GPIO)   += clk-gpio.o
 obj-$(CONFIG_TI_SCI_CLK)	+= ti-sci-clk.o
+obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
new file mode 100644
index 0000000000..4d1dcbebb0
--- /dev/null
+++ b/drivers/clk/sunxi/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ARCH_SUN50I_A64) += clk-sun50i-a64.o
diff --git a/drivers/clk/sunxi/clk-sun50i-a64.c b/drivers/clk/sunxi/clk-sun50i-a64.c
new file mode 100644
index 0000000000..c77f366c6e
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun50i-a64.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: 2022 Jules Maselbas
+
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <linux/clk.h>
+#include <io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#define MHZ (1000UL * 1000UL)
+
+#include "clk-sun50i-a64.h"
+
+#define CCU_PLL_CPUX		0x00
+#define CCU_PLL_PERIPH0		0x28
+#define CCU_CPUX_AXI_CFG	0x50
+
+static struct clk *clks[CLK_NUMBER];
+static struct clk_onecell_data clk_data = {
+	.clks = clks,
+	.clk_num = ARRAY_SIZE(clks),
+};
+
+static inline struct clk *
+sunxi_clk_gate(const char *name, const char *parent, void __iomem *reg, u8 shift)
+{
+	return clk_gate(name, parent, reg, shift, 0, 0);
+}
+
+static inline struct clk *
+sunxi_clk_mux(const char *name, const char * const *parents, u8 num_parents,
+	      void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_mux(name, 0, reg, shift, width, parents, num_parents, 0);
+}
+
+static inline struct clk *
+sunxi_clk_div_table(const char *name, const char *parent, struct clk_div_table *table,
+	      void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_divider_table(name, parent, CLK_SET_RATE_PARENT, reg, shift,
+				 width, table, 0);
+}
+
+static inline struct clk *
+sunxi_clk_div(const char *name, const char *parent,
+		void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_divider(name, parent, CLK_SET_RATE_PARENT, reg, shift,
+				 width, 0);
+}
+
+static struct clk_div_table div_apb1[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+
+static struct clk_div_table div_N[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+
+static const char *sel_cpux[] = {
+	"osc32k",
+	"osc24M",
+	"pll-cpux",
+};
+
+static const char *sel_ahb1[] = {
+	"osc32k",
+	"osc24M",
+	"axi",
+	"pll-periph0",
+};
+
+static const char *sel_apb2[] = {
+	"osc32k",
+	"osc24M",
+	"pll-periph0-2x",
+	"pll-periph0-2x",
+};
+
+static const char *sel_ahb2[] = {
+	"ahb1",
+	"pll-periph0",
+};
+
+static const char *sel_mmc[] = {
+	"osc24M",
+	"pll-periph0-2x",
+	"pll-periph1-2x",
+};
+
+static void sun50i_a64_resets_init(void __iomem *regs)
+{
+	u32 rst;
+
+	rst = 0 |
+		/* RST_USB_PHY0 */ BIT(0) |
+		/* RST_USB_PHY1 */ BIT(1) |
+		/* RST_USB_HSIC */ BIT(2);
+	writel(rst, regs + 0x0cc);
+
+	rst = 0 |
+		/* RST_BUS_MIPI_DSI */ BIT(1) |
+		/* RST_BUS_CE   */ BIT(5) |
+		/* RST_BUS_DMA  */ BIT(6) |
+		/* RST_BUS_MMC0 */ BIT(8) |
+		/* RST_BUS_MMC1 */ BIT(9) |
+		/* RST_BUS_MMC2 */ BIT(10) |
+		/* RST_BUS_NAND */ BIT(13) |
+		/* RST_BUS_DRAM */ BIT(14) |
+		/* RST_BUS_EMAC */ BIT(17) |
+		/* RST_BUS_TS   */ BIT(18) |
+		/* RST_BUS_HSTIMER */ BIT(19) |
+		/* RST_BUS_SPI0  */ BIT(20) |
+		/* RST_BUS_SPI1  */ BIT(21) |
+		/* RST_BUS_OTG   */ BIT(23) |
+		/* RST_BUS_EHCI0 */ BIT(24) |
+		/* RST_BUS_EHCI1 */ BIT(25) |
+		/* RST_BUS_OHCI0 */ BIT(28) |
+		/* RST_BUS_OHCI1 */ BIT(29);
+	writel(rst, regs + 0x2c0);
+
+	rst = 0 |
+		/* RST_BUS_VE    */ BIT(0) |
+		/* RST_BUS_TCON0 */ BIT(3) |
+		/* RST_BUS_TCON1 */ BIT(4) |
+		/* RST_BUS_DEINTERLACE */ BIT(5) |
+		/* RST_BUS_CSI   */ BIT(8) |
+		/* RST_BUS_HDMI0 */ BIT(10) |
+		/* RST_BUS_HDMI1 */ BIT(11) |
+		/* RST_BUS_DE    */ BIT(12) |
+		/* RST_BUS_GPU   */ BIT(20) |
+		/* RST_BUS_MSGBOX   */ BIT(21) |
+		/* RST_BUS_SPINLOCK */ BIT(22) |
+		/* RST_BUS_DBG */ BIT(31);
+	writel(rst, regs + 0x2c4);
+
+	rst = /* RST_BUS_LVDS */ BIT(0);
+	writel(rst, regs + 0x2c8);
+
+	rst = 0 |
+		/* RST_BUS_CODEC */ BIT(0) |
+		/* RST_BUS_SPDIF */ BIT(1) |
+		/* RST_BUS_THS   */ BIT(8) |
+		/* RST_BUS_I2S0  */ BIT(12) |
+		/* RST_BUS_I2S1  */ BIT(13) |
+		/* RST_BUS_I2S2  */ BIT(14);
+	writel(rst, regs + 0x2d0);
+
+	rst = 0 |
+		/* RST_BUS_I2C0 */ BIT(0) |
+		/* RST_BUS_I2C1 */ BIT(1) |
+		/* RST_BUS_I2C2 */ BIT(2) |
+		/* RST_BUS_SCR  */ BIT(5) |
+		/* RST_BUS_UART0 */ BIT(16) |
+		/* RST_BUS_UART1 */ BIT(17) |
+		/* RST_BUS_UART2 */ BIT(18) |
+		/* RST_BUS_UART3 */ BIT(19) |
+		/* RST_BUS_UART4 */ BIT(20);
+	writel(rst, regs + 0x2d8);
+}
+
+static void nop_delay(u32 cnt)
+{
+	while (cnt--)
+		barrier();
+}
+
+static inline void sunxi_clk_set_pll(void __iomem *reg, u32 src, u32 freq)
+{
+	/* NOTE: using u32, max freq is 4GHz
+	 * out freq: src * N * K
+	 * factor N: [1->32]
+	 * factor K: [1->4]
+	 * from the manual: give priority to the choice of K >= 2
+	 */
+	u32 mul = freq / src; /* target multiplier (N * K) */
+	u32 k, n;
+	u32 cfg = BIT(31); /* ENABLE */
+
+	for (k = 4; k > 1; k--) {
+		if ((mul % k) == 0)
+			break;
+	}
+	n = mul / k;
+
+	cfg |= (k - 1) << 4;
+	cfg |= (n - 1) << 8;
+
+	writel(cfg, reg);
+
+	/* wait for pll lock */
+	while (!(readl(reg) & BIT(28)));
+}
+
+static void sun50i_a64_clocks_init(struct device_node *np, void __iomem *regs)
+{
+	sun50i_a64_resets_init(regs);
+
+	/* switch cpu clock source to osc-24M */
+	writel(0x10000, regs + CCU_CPUX_AXI_CFG);
+	/* wait 8 cycles */
+	nop_delay(8);
+	/* set pll-cpux to 816MHz */
+	sunxi_clk_set_pll(regs + CCU_PLL_CPUX, 24 * MHZ, 816 * MHZ);
+	nop_delay(10000); /* HACK: ~1ms delay  */
+	/* switch cpu clock source to pll-cpux*/
+	writel( /* clk_src: 1=24Mhz 2=pll-cpux */ (2 << 16) |
+		/* apb_div: /2 */ (1 << 8) |
+		/* axi_div: /2 */ (1 << 0),
+		regs + CCU_CPUX_AXI_CFG);
+	/* wait 8 cycles */
+	nop_delay(8);
+
+	clks[CLK_PLL_CPUX] = clk_fixed("pll-cpux", 816 * MHZ);
+	clks[CLK_CPUX] = sunxi_clk_mux("cpux", sel_cpux, ARRAY_SIZE(sel_cpux), regs + CCU_CPUX_AXI_CFG, 16, 2);
+
+	/* set pll-periph0-2x to 1.2GHz, as recommended */
+	sunxi_clk_set_pll(regs + CCU_PLL_PERIPH0, 24 * MHZ, 1200 * MHZ);
+
+	clks[CLK_PLL_PERIPH0_2X] = clk_fixed("pll-periph0-2x", 1200 * MHZ);
+	clks[CLK_PLL_PERIPH0]    = clk_fixed_factor("pll-periph0", "pll-periph0-2x", 1, 2, 0);
+
+	clks[CLK_AXI] = sunxi_clk_div("axi", "cpux", regs + CCU_CPUX_AXI_CFG, 0, 2);
+
+	clks[CLK_AHB1] = sunxi_clk_mux("ahb1", sel_ahb1, ARRAY_SIZE(sel_ahb1), regs + 0x054, 12, 2);
+	clks[CLK_AHB2] = sunxi_clk_mux("ahb2", sel_ahb2, ARRAY_SIZE(sel_ahb2), regs + 0x05c, 0, 1);
+
+	clks[CLK_APB1] = sunxi_clk_div_table("apb1", "ahb1", div_apb1, regs + 0x054, 8, 2);
+	clks[CLK_APB2] = sunxi_clk_mux("apb2", sel_apb2, ARRAY_SIZE(sel_apb2), regs + 0x058, 24, 2);
+
+	clks[CLK_BUS_MIPI_DSI] = sunxi_clk_gate("bus-mipi-dsi","ahb1",regs + 0x060, 1);
+	clks[CLK_BUS_CE]    = sunxi_clk_gate("bus-ce",    "ahb1", regs + 0x060, 5);
+	clks[CLK_BUS_DMA]   = sunxi_clk_gate("bus-dma",   "ahb1", regs + 0x060, 6);
+	clks[CLK_BUS_MMC0]  = sunxi_clk_gate("bus-mmc0",  "ahb1", regs + 0x060, 8);
+	clks[CLK_BUS_MMC1]  = sunxi_clk_gate("bus-mmc1",  "ahb1", regs + 0x060, 9);
+	clks[CLK_BUS_MMC2]  = sunxi_clk_gate("bus-mmc2",  "ahb1", regs + 0x060, 10);
+	clks[CLK_BUS_NAND]  = sunxi_clk_gate("bus-nand",  "ahb1", regs + 0x060, 13);
+	clks[CLK_BUS_DRAM]  = sunxi_clk_gate("bus-dram",  "ahb1", regs + 0x060, 14);
+	clks[CLK_BUS_EMAC]  = sunxi_clk_gate("bus-emac",  "ahb2", regs + 0x060, 17);
+	clks[CLK_BUS_TS]    = sunxi_clk_gate("bus-ts",    "ahb1", regs + 0x060, 18);
+	clks[CLK_BUS_HSTIMER] = sunxi_clk_gate("bus-hstimer", "ahb1", regs + 0x060, 19);
+	clks[CLK_BUS_SPI0]  = sunxi_clk_gate("bus-spi0",  "ahb1", regs + 0x060,  20);
+	clks[CLK_BUS_SPI1]  = sunxi_clk_gate("bus-spi1",  "ahb1", regs + 0x060,  21);
+	clks[CLK_BUS_OTG]   = sunxi_clk_gate("bus-otg",   "ahb1", regs + 0x060,  23);
+	clks[CLK_BUS_EHCI0] = sunxi_clk_gate("bus-ehci0", "ahb1", regs + 0x060, 24);
+	clks[CLK_BUS_EHCI1] = sunxi_clk_gate("bus-ehci1", "ahb2", regs + 0x060, 25);
+	clks[CLK_BUS_OHCI0] = sunxi_clk_gate("bus-ohci0", "ahb1", regs + 0x060, 28);
+	clks[CLK_BUS_OHCI1] = sunxi_clk_gate("bus-ohci1", "ahb2", regs + 0x060, 29);
+
+	clks[CLK_BUS_CODEC] = sunxi_clk_gate("bus-codec", "apb1", regs + 0x068, 0);
+	clks[CLK_BUS_SPDIF] = sunxi_clk_gate("bus-spdif", "apb1", regs + 0x068, 1);
+	clks[CLK_BUS_PIO]   = sunxi_clk_gate("bus-pio",   "apb1", regs + 0x068, 5);
+	clks[CLK_BUS_THS]   = sunxi_clk_gate("bus-ths",   "apb1", regs + 0x068, 8);
+	clks[CLK_BUS_I2S0]  = sunxi_clk_gate("bus-i2s0",  "apb1", regs + 0x068, 12);
+	clks[CLK_BUS_I2S1]  = sunxi_clk_gate("bus-i2s1",  "apb1", regs + 0x068, 13);
+	clks[CLK_BUS_I2S2]  = sunxi_clk_gate("bus-i2s2",  "apb1", regs + 0x068, 14);
+
+	clks[CLK_BUS_UART0] = sunxi_clk_gate("bus-uart0", "apb2", regs + 0x06c, 16);
+	clks[CLK_BUS_UART1] = sunxi_clk_gate("bus-uart1", "apb2", regs + 0x06c, 17);
+	clks[CLK_BUS_UART2] = sunxi_clk_gate("bus-uart2", "apb2", regs + 0x06c, 18);
+	clks[CLK_BUS_UART3] = sunxi_clk_gate("bus-uart3", "apb2", regs + 0x06c, 19);
+	clks[CLK_BUS_UART4] = sunxi_clk_gate("bus-uart4", "apb2", regs + 0x06c, 20);
+
+	writel(0, regs + 0x088);
+	clks[CLK_MMC0] = clk_register_composite(
+		"mmc0",	sel_mmc, ARRAY_SIZE(sel_mmc),
+		sunxi_clk_mux("mmc0-mux", sel_mmc, ARRAY_SIZE(sel_mmc), regs + 0x088, 24, 2),
+		sunxi_clk_div("mmc0-div-m", "mmc0-mux", regs + 0x088, 0, 4),
+		sunxi_clk_gate("mmc0-gate", "mmc0-div-n", regs + 0x088, 31),
+		0);
+
+	writel(0, regs + 0x08c);
+	clks[CLK_MMC1] = clk_register_composite(
+		"mmc1",	sel_mmc, ARRAY_SIZE(sel_mmc),
+		sunxi_clk_mux("mmc1-mux", sel_mmc, ARRAY_SIZE(sel_mmc), regs + 0x08c, 24, 2),
+		sunxi_clk_div("mmc1-div-m", "mmc1-mux", regs + 0x08c, 0, 4),
+		sunxi_clk_gate("mmc1-gate", "mmc1-div-n", regs + 0x08c, 31),
+		0);
+
+	writel(0, regs + 0x090);
+	clks[CLK_MMC2] = clk_register_composite(
+		"mmc2",	sel_mmc, ARRAY_SIZE(sel_mmc),
+		sunxi_clk_mux("mmc2-mux", sel_mmc, ARRAY_SIZE(sel_mmc), regs + 0x090, 24, 2),
+		sunxi_clk_div("mmc2-div-m", "mmc2-mux", regs + 0x090, 0, 4),
+		sunxi_clk_gate("mmc2-gate", "mmc2-div-n", regs + 0x090, 31),
+		0);
+}
+
+static int sun50i_a64_ccu_probe(struct device *dev)
+{
+	struct resource *iores;
+
+	iores = dev_request_mem_resource(dev, 0);
+	if (IS_ERR(iores))
+		return PTR_ERR(iores);
+
+	sun50i_a64_clocks_init(dev->of_node, IOMEM(iores->start));
+	return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, &clk_data);
+}
+
+static __maybe_unused struct of_device_id sun50i_a64_ccu_dt_ids[] = {
+	{
+		.compatible = "allwinner,sun50i-a64-ccu",
+	}, {
+		/* sentinel */
+	}
+};
+
+static struct driver sun50i_a64_ccu_driver = {
+	.probe	= sun50i_a64_ccu_probe,
+	.name	= "sun50i-a64-ccu",
+	.of_compatible = DRV_OF_COMPAT(sun50i_a64_ccu_dt_ids),
+};
+core_platform_driver(sun50i_a64_ccu_driver);
diff --git a/drivers/clk/sunxi/clk-sun50i-a64.h b/drivers/clk/sunxi/clk-sun50i-a64.h
new file mode 100644
index 0000000000..a4ddc39eb8
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun50i-a64.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+
+#ifndef _CLK_SUN50I_A64_H_
+#define _CLK_SUN50I_A64_H_
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+#define CLK_OSC_12M			0
+#define CLK_PLL_CPUX			1
+#define CLK_PLL_AUDIO_BASE		2
+#define CLK_PLL_AUDIO			3
+#define CLK_PLL_AUDIO_2X		4
+#define CLK_PLL_AUDIO_4X		5
+#define CLK_PLL_AUDIO_8X		6
+
+/* PLL_VIDEO0 exported for HDMI PHY */
+
+#define CLK_PLL_VIDEO0_2X		8
+#define CLK_PLL_VE			9
+#define CLK_PLL_DDR0			10
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X		12
+#define CLK_PLL_PERIPH1			13
+#define CLK_PLL_PERIPH1_2X		14
+#define CLK_PLL_VIDEO1			15
+#define CLK_PLL_GPU			16
+#define CLK_PLL_MIPI			17
+#define CLK_PLL_HSIC			18
+#define CLK_PLL_DE			19
+#define CLK_PLL_DDR1			20
+#define CLK_AXI				22
+#define CLK_APB				23
+#define CLK_AHB1			24
+#define CLK_APB1			25
+#define CLK_APB2			26
+#define CLK_AHB2			27
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_USB_OHCI0_12M		90
+
+#define CLK_USB_OHCI1_12M		92
+
+/* All the DRAM gates are exported */
+
+/* And the DSI and GPU module clock is exported */
+
+#define CLK_NUMBER			(CLK_GPU + 1)
+
+#endif /* _CLK_SUN50I_A64_H_ */
-- 
2.46.2