[PATCH 3/5] ARM: SoCFPGA: arria10-sdram: cleanup emif_reset

[Steffen Trumtrar <s.trumtrar@pengutronix.de>]

Use the __wait_on_timeout code to poll for EMIF reset.

Be sure to clear EMIF if reset fails before trying again.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 arch/arm/mach-socfpga/arria10-sdram.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/arria10-sdram.c b/arch/arm/mach-socfpga/arria10-sdram.c
index da7d3ea685e238c8c9abda84976a1161edfc4b03..c28cf50eb55fb97c2dfe52acfbc360784ca3e36b 100644
--- a/arch/arm/mach-socfpga/arria10-sdram.c
+++ b/arch/arm/mach-socfpga/arria10-sdram.c
@@ -244,13 +244,16 @@ static int emif_reset(void)
 
 	writel(CORE2SEQ_INT_REQ, DDR_REG_CORE2SEQ);
 
-	if (ddr_wait_bit(DDR_REG_SEQ2CORE, SEQ2CORE_INT_RESP_BIT, 0, 1000000)) {
+	ret = __wait_on_timeout(1000000, readl(DDR_REG_SEQ2CORE) &
+				SEQ2CORE_INT_RESP_BIT);
+	if (ret) {
 		printf("emif_reset failed to see interrupt acknowledge\n");
+		emif_clear();
 		return -2;
-	} else {
-		printf("emif_reset interrupt acknowledged\n");
 	}
 
+	__udelay(1000);
+
 	ret = emif_clear();
 	if (ret) {
 		printf("emif_clear() failed\n");

-- 
2.45.2