From: Sascha Hauer <s.hauer@pengutronix.de>
To: BAREBOX <barebox@lists.infradead.org>
Subject: [PATCH v2 27/33] dma: ti: k3-udma: limit asel to am625
Date: Thu, 05 Jun 2025 14:42:52 +0200 [thread overview]
Message-ID: <20250605-arm-k3-am62l-v2-27-53257d4b2dd2@pengutronix.de> (raw)
In-Reply-To: <20250605-arm-k3-am62l-v2-0-53257d4b2dd2@pengutronix.de>
For reasons currently unknown the asel setting is only needed and
required on am625. It doesn't work on AM62l though.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/dma/ti/k3-udma-common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/ti/k3-udma-common.c b/drivers/dma/ti/k3-udma-common.c
index 8661d148aa1324828a168edb5caa496bb7e6da45..49e2396e9b52145fdf325c2e07efe0869f844a1d 100644
--- a/drivers/dma/ti/k3-udma-common.c
+++ b/drivers/dma/ti/k3-udma-common.c
@@ -1102,7 +1102,7 @@ int udma_of_xlate(struct dma *dma, struct of_phandle_args *args)
ep_config->mapped_channel_id >= 0) {
ucc->mapped_channel_id = ep_config->mapped_channel_id;
ucc->default_flow_id = ep_config->default_flow_id;
- if (args->args_count == 2)
+ if (of_machine_is_compatible("ti,am625") && args->args_count == 2)
ucc->asel = args->args[1];
} else {
ucc->mapped_channel_id = -1;
--
2.39.5
next prev parent reply other threads:[~2025-06-05 13:15 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-05 12:42 [PATCH v2 00/33] ARM: K3: add support for AM62L Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 01/33] scripts/k3img: make more flexible Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 02/33] images: K3: rename %.k3img target to %.k3_am62x_img Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 03/33] ARM: K3: prepare support for other SoCs Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 04/33] ARM: dts: add k3-am62l dts(i) files Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 05/33] ARM: dts: am62l: Fix assigned-clock-parents Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 06/33] ARM: K3: add am62lx base support Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 07/33] ARM: Makefile: descend into mach-* for cleaning Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 08/33] ARM: k3: rename yaml files from am625 to am62x Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 09/33] firmware: add ti-linux-firmware submodule Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 10/33] scripts/ti-board-config.py: fix length Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 11/33] ARM: k3: add yaml files for AM62l Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 12/33] k3: ringacc: pass ringrt address in struct k3_ringacc_init_data Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 13/33] drivers: soc: ti: k3-ringacc: handle absence of tisci Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 14/33] drivers: soc: ti: k3-ringacc: fix k3_ringacc_ring_reset_sci Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 15/33] dma: ti: k3-psil: Add PSIL data for AM62L Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 16/33] dma: ti: k3-udma: Refactor common bits for AM62L support Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 17/33] dma: ti: k3-udma-common: Update common code for AM62L DMAs Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 18/33] dma: ti: k3-udma-am62l: Add AM62L support DMA drivers Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 19/33] ARM: dts: am62l: Add ethernet ports Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 20/33] ARM: dts: am62l evm: " Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 21/33] ARM: k3: am62l: add barebox specific am62l.dtsi Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 22/33] net: davinci_mdio: Use fallback clock rate Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 23/33] firmware: arm_scmi: Add support for clock parents Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 24/33] clk: add struct clk_parent_data Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 25/33] clk: arm_scmi: implement clock parent setting Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 26/33] ARM: dts: am62l3-evm: add MMC aliases Sascha Hauer
2025-06-05 12:42 ` Sascha Hauer [this message]
2025-06-05 12:42 ` [PATCH v2 28/33] gpio: increase ARCH_NR_GPIOS to 512 Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 29/33] ARM: dts: k3-am62l: reserve memory for TF-A and OP-TEE Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 30/33] ARM: k3: add AM62l3 EVM board support Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 31/33] ARM: K3: am62l: add serial aliases Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 32/33] Documentation: boards: k3: split generic and am62x specific documentation Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 33/33] Documentation: boards: k3: add AM62lx documentation Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250605-arm-k3-am62l-v2-27-53257d4b2dd2@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox