From: Ahmad Fatoum <a.fatoum@barebox.org>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@barebox.org>
Subject: [PATCH 13/44] drivers: use dev_add_param_uint32_fixed for IDs
Date: Mon, 11 Aug 2025 14:27:53 +0200 [thread overview]
Message-ID: <20250811122824.1667791-14-a.fatoum@barebox.org> (raw)
In-Reply-To: <20250811122824.1667791-1-a.fatoum@barebox.org>
Cut down on the use of temporary buffers for formatting integers in
fixed parameters by using the dev_add_param_uint32_fixed that's
especially meant for this.
Signed-off-by: Ahmad Fatoum <a.fatoum@barebox.org>
---
drivers/mfd/superio.c | 7 ++-----
drivers/pci/bus.c | 16 +++++-----------
drivers/w1/w1.c | 10 +++-------
3 files changed, 10 insertions(+), 23 deletions(-)
diff --git a/drivers/mfd/superio.c b/drivers/mfd/superio.c
index 891c8ace52e2..9917c0ff9a59 100644
--- a/drivers/mfd/superio.c
+++ b/drivers/mfd/superio.c
@@ -68,7 +68,6 @@ void superio_chip_add(struct superio_chip *siochip)
{
struct regmap *regmap;
char *chipname;
- char str[5];
int ret;
chipname = xasprintf("superio-%04x:%04x@%02x",
@@ -79,10 +78,8 @@ void superio_chip_add(struct superio_chip *siochip)
siochip->dev->priv = siochip;
- sprintf(str, "%04x", siochip->vid);
- dev_add_param_fixed(siochip->dev, "vendor", str);
- sprintf(str, "%04x", siochip->devid);
- dev_add_param_fixed(siochip->dev, "device", str);
+ dev_add_param_uint32_fixed(siochip->dev, "vendor", siochip->vid, "%04x");
+ dev_add_param_uint32_fixed(siochip->dev, "device", siochip->devid, "%04x");
regmap = regmap_init(siochip->dev, &superio_regmap_bus, siochip,
&superio_regmap_config);
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index c8f5b592428d..a5da84d282b4 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -133,7 +133,6 @@ int pci_register_driver(struct pci_driver *pdrv)
int pci_register_device(struct pci_dev *pdev)
{
- char str[6];
struct device *dev = &pdev->dev;
int ret;
@@ -149,16 +148,11 @@ int pci_register_device(struct pci_dev *pdev)
if (ret)
return ret;
- sprintf(str, "%02x", pdev->devfn);
- dev_add_param_fixed(dev, "devfn", str);
- sprintf(str, "%04x", (pdev->class >> 8) & 0xffff);
- dev_add_param_fixed(dev, "class", str);
- sprintf(str, "%04x", pdev->vendor);
- dev_add_param_fixed(dev, "vendor", str);
- sprintf(str, "%04x", pdev->device);
- dev_add_param_fixed(dev, "device", str);
- sprintf(str, "%04x", pdev->revision);
- dev_add_param_fixed(dev, "revision", str);
+ dev_add_param_uint32_fixed(dev, "devfn", pdev->devfn, "%02x");
+ dev_add_param_uint32_fixed(dev, "class", (pdev->class >> 8) & 0xffff, "%04x");
+ dev_add_param_uint32_fixed(dev, "vendor", pdev->vendor, "%04x");
+ dev_add_param_uint32_fixed(dev, "device", pdev->device, "%04x");
+ dev_add_param_uint32_fixed(dev, "revision", pdev->revision, "%04x");
return 0;
}
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 61f21ff446b8..3944c4676ee8 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -411,7 +411,6 @@ static bool w1_is_registered(struct w1_bus *bus, u64 rn)
static int w1_device_register(struct w1_bus *bus, struct w1_device *dev)
{
- char str[18];
int ret;
dev_set_name(&dev->dev, "w1-%x-", dev->fid);
@@ -425,12 +424,9 @@ static int w1_device_register(struct w1_bus *bus, struct w1_device *dev)
if (ret)
return ret;
- sprintf(str, "0x%x", dev->fid);
- dev_add_param_fixed(&dev->dev, "fid", str);
- sprintf(str, "0x%llx", dev->id);
- dev_add_param_fixed(&dev->dev, "id", str);
- sprintf(str, "0x%llx", dev->reg_num);
- dev_add_param_fixed(&dev->dev, "reg_num", str);
+ dev_add_param_uint32_fixed(&dev->dev, "fid", dev->fid, "0x%x");
+ dev_add_param_uint64_fixed(&dev->dev, "id", dev->id, "0x%llx");
+ dev_add_param_uint64_fixed(&dev->dev, "reg_num", dev->reg_num, "0x%llx");
return ret;
}
--
2.39.5
next prev parent reply other threads:[~2025-08-11 12:29 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-11 12:27 [PATCH 00/44] commands: add bfetch/buds of command redirection Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 01/44] driver: move device name definition into device.h Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 02/44] driver: introduce common struct bobject Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 03/44] lib: param: rename dev_remove_param to param_remove Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 04/44] param: implement dev_remove_parameters using param_remove Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 05/44] lib: param: add dev_for_each_param helpers Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 06/44] driver: initialize device parameters as part of bobject Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 07/44] param: operate on bobjects instead of full devices Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 08/44] commands: version: print value of CONFIG_NAME Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 09/44] treewide: populate CONFIG_NAME for all configs in-tree Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 10/44] test: py: change barebox_config from set to dict Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 11/44] test: add heuristic for guessing labgrid environment YAML Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 12/44] usb: drop dead iSerialNumber parameter addition Ahmad Fatoum
2025-08-11 12:27 ` Ahmad Fatoum [this message]
2025-08-11 12:27 ` [PATCH 14/44] param: make bobject_add_param_fixed variadic Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 15/44] param: handle NULL gracefully in bobject_get_param Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 16/44] common: introduce structured I/O Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 17/44] ARM: cpuinfo: support structio output Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 18/44] commands: uptime: enable structured I/O Ahmad Fatoum
2025-08-11 12:27 ` [PATCH 19/44] string: implement strv_length helper Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 20/44] ARM: psci: client: add PSCI version/method parameters Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 21/44] net: move netmask_to_prefix into header Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 22/44] stringlist: implement string_list_empty Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 23/44] optee: add revision info to tee devinfo output Ahmad Fatoum
2025-08-12 9:35 ` Sascha Hauer
2025-08-12 9:44 ` Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 24/44] tee: enable structured I/O in devinfo handler Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 25/44] mtd: add devices to new mtd class Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 26/44] nvmem: add devices to new nvmem class Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 27/44] nvmem: export functions to query NVMEM size Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 28/44] video: add devices to new fb class Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 29/44] security: blobgen: add easy way to check for existent providers Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 30/44] pmdomain: add easy way to check for provider support Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 31/44] bbu: add easy way to check for existent providers Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 32/44] firmware: " Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 33/44] rtc: export rtc_class in header Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 34/44] driver: featctrl: export of_feature_controllers Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 35/44] net: dsa: export dsa_switch_list Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 36/44] usb: export usb_host_list Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 37/44] pstore: export pstore_is_ready Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 38/44] pinctrl: export pinctrl_list Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 39/44] clk: implement clk_have_nonfixed_providers Ahmad Fatoum
2025-08-13 5:38 ` Sascha Hauer
2025-08-11 12:28 ` [PATCH 40/44] driver: bus: export get_bus_by_name Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 41/44] fimware: arm_scmi: export scmi_list Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 42/44] block: define BLK_TYPE_COUNT as last enum blk_type value Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 43/44] commands: introduce bfetch command Ahmad Fatoum
2025-08-12 10:39 ` Sascha Hauer
2025-08-12 11:09 ` Ahmad Fatoum
2025-08-11 12:28 ` [PATCH 44/44] configs: enable bfetch in some popular defconfigs Ahmad Fatoum
2025-08-12 10:29 ` [PATCH 00/44] commands: add bfetch/buds of command redirection Sascha Hauer
2025-08-12 11:23 ` Ahmad Fatoum
2025-08-13 5:48 ` (subset) " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250811122824.1667791-14-a.fatoum@barebox.org \
--to=a.fatoum@barebox.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox