From: Ahmad Fatoum <a.fatoum@barebox.org>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@barebox.org>
Subject: [PATCH 1/5] regulator: implement dev_of_regulator_get
Date: Mon, 27 Oct 2025 07:53:04 +0100 [thread overview]
Message-ID: <20251027065315.2419160-1-a.fatoum@barebox.org> (raw)
Regulators for a device need not be listed in the main node associated
with a device. Export dev_of_regulator_get for these use cases to
simplify porting Linux drivers.
Signed-off-by: Ahmad Fatoum <a.fatoum@barebox.org>
---
drivers/regulator/core.c | 20 ++++++++++++--------
include/regulator.h | 27 ++++++++++++++++++++++-----
2 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f18622cba80c..cd0795589403 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -329,7 +329,8 @@ int of_regulator_register(struct regulator_dev *rdev, struct device_node *node)
}
static struct regulator_dev *of_regulator_get(struct device *dev,
- const char *supply)
+ struct device_node *np,
+ const char *supply)
{
char *propname;
struct regulator_dev *rdev;
@@ -339,7 +340,7 @@ static struct regulator_dev *of_regulator_get(struct device *dev,
/*
* If the device does have a device node return the dummy regulator.
*/
- if (!dev->of_node)
+ if (!np)
return NULL;
propname = basprintf("%s-supply", supply);
@@ -348,7 +349,7 @@ static struct regulator_dev *of_regulator_get(struct device *dev,
* If the device node does not contain a supply property, this device doesn't
* need a regulator. Return the dummy regulator in this case.
*/
- if (!of_get_property(dev->of_node, propname, NULL)) {
+ if (!of_get_property(np, propname, NULL)) {
dev_dbg(dev, "No %s-supply node found, using dummy regulator\n",
supply);
rdev = NULL;
@@ -359,7 +360,7 @@ static struct regulator_dev *of_regulator_get(struct device *dev,
* The device node specifies a supply, so it's mandatory. Return an error when
* something goes wrong below.
*/
- node = of_parse_phandle(dev->of_node, propname, 0);
+ node = of_parse_phandle(np, propname, 0);
if (!node) {
dev_dbg(dev, "No %s node found\n", propname);
rdev = ERR_PTR(-EINVAL);
@@ -408,7 +409,8 @@ static struct regulator_dev *of_regulator_get(struct device *dev,
}
#else
static struct regulator_dev *of_regulator_get(struct device *dev,
- const char *supply)
+ struct device_node *np,
+ const char *supply)
{
return NULL;
}
@@ -505,14 +507,16 @@ static struct regulator_dev *dev_regulator_get(struct device *dev,
*
* Return: a regulator object or an error pointer
*/
-struct regulator *regulator_get(struct device *dev, const char *supply)
+struct regulator *dev_of_regulator_get(struct device *dev,
+ struct device_node *np,
+ const char *supply)
{
struct regulator_dev *rdev = NULL;
struct regulator *r;
int ret;
- if (dev->of_node && supply) {
- rdev = of_regulator_get(dev, supply);
+ if (np && supply) {
+ rdev = of_regulator_get(dev, np, supply);
if (IS_ERR(rdev))
return ERR_CAST(rdev);
}
diff --git a/include/regulator.h b/include/regulator.h
index cb542b05c696..401cb8ba464e 100644
--- a/include/regulator.h
+++ b/include/regulator.h
@@ -4,8 +4,7 @@
#include <linux/bitops.h>
#include <linux/err.h>
-
-struct device;
+#include <device.h>
/* struct regulator is an opaque object for consumers */
struct regulator;
@@ -212,7 +211,9 @@ const char *rdev_get_name(struct regulator_dev *rdev);
#ifdef CONFIG_REGULATOR
-struct regulator *regulator_get(struct device *, const char *);
+struct regulator *dev_of_regulator_get(struct device *dev,
+ struct device_node *np,
+ const char *supply);
void regulator_put(struct regulator *r);
struct regulator *regulator_get_name(const char *name);
int regulator_enable(struct regulator *);
@@ -265,8 +266,9 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
unsigned int selector);
#else
-static inline struct regulator *regulator_get(struct device *dev,
- const char *id)
+struct regulator *dev_of_regulator_get(struct device *dev,
+ struct device_node *np,
+ const char *supply)
{
return NULL;
}
@@ -327,6 +329,21 @@ static inline int regulator_get_voltage(struct regulator *regulator)
#endif
+/*
+ * regulator_get - get the supply for a device.
+ * @dev: the device a supply is requested for
+ * @supply: the supply name
+ *
+ * This returns a supply for a device. Check the result with IS_ERR().
+ * NULL is a valid regulator, the dummy regulator.
+ *
+ * Return: a regulator object or an error pointer
+ */
+static inline struct regulator *regulator_get(struct device *dev, const char *id)
+{
+ return dev_of_regulator_get(dev, dev_of_node(dev), id);
+}
+
static inline struct regulator *regulator_get_optional(struct device *dev,
const char *id)
{
--
2.47.3
next reply other threads:[~2025-10-27 6:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-27 6:53 Ahmad Fatoum [this message]
2025-10-27 6:53 ` [PATCH 2/5] pmdomain: look up pmdomain even if not have_genpd_providers Ahmad Fatoum
2025-10-27 7:19 ` Ahmad Fatoum
2025-10-27 6:53 ` [PATCH 3/5] pmdomain: warn if deep probe enabled and driver missing Ahmad Fatoum
2025-10-27 6:53 ` [PATCH 4/5] pmdomain: allow callback for when devices are attached Ahmad Fatoum
2025-10-27 6:53 ` [PATCH 5/5] pmdomain: add Rockchip power domain support Ahmad Fatoum
2025-10-27 12:27 ` [PATCH 1/5] regulator: implement dev_of_regulator_get Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251027065315.2419160-1-a.fatoum@barebox.org \
--to=a.fatoum@barebox.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox