mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@barebox.org>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@barebox.org>
Subject: [PATCH 14/26] ramdisk: validate exported sector size
Date: Fri, 26 Jun 2026 10:42:25 +0200	[thread overview]
Message-ID: <20260626084608.1388806-15-a.fatoum@barebox.org> (raw)
In-Reply-To: <20260626084608.1388806-1-a.fatoum@barebox.org>

ramdisk_init() currently accepts arbitrary sector sizes, including
sizes smaller than 512 bytes and non-power-of-two.

Make use of the new block_size_bits() to trigger an error message when
this occurs and while at it, also fix the memory leaks if the function
fails.

Signed-off-by: Ahmad Fatoum <a.fatoum@barebox.org>
---
 drivers/block/ramdisk.c | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/block/ramdisk.c b/drivers/block/ramdisk.c
index 6f3c9348058a..f6f1c4cda963 100644
--- a/drivers/block/ramdisk.c
+++ b/drivers/block/ramdisk.c
@@ -3,12 +3,12 @@
 
 #include <ramdisk.h>
 #include <block.h>
+#include <disks.h>
 #include <driver.h>
 #include <fs.h>
 #include <string.h>
 #include <xfuncs.h>
 #include <linux/align.h>
-#include <linux/log2.h>
 
 struct ramdisk {
 	struct block_device blk;
@@ -101,39 +101,55 @@ static struct cdev_operations ramdisk_ops = {
 
 struct ramdisk *ramdisk_init(int sector_size)
 {
+	struct device *dev;
 	struct ramdisk *ramdisk;
 	struct block_device *blk;
-	int ret;
+	int blockbits, ret;
+
 
 	ramdisk = xzalloc(sizeof(*ramdisk));
+	dev = &ramdisk->dev;
 
-	dev_set_name(&ramdisk->dev, "ramdisk");
-	ramdisk->dev.id = DEVICE_ID_DYNAMIC;
+	dev_set_name(dev, "ramdisk");
+	dev->id = DEVICE_ID_DYNAMIC;
 
-	ret = register_device(&ramdisk->dev);
+	ret = register_device(dev);
 	if (ret)
-		return NULL;
+		goto free_ramdisk;
+
+	blockbits = block_size_bits(dev, sector_size);
+	if (blockbits < 0)
+		goto unregister_device;
 
 	blk = &ramdisk->blk;
-	blk->dev = &ramdisk->dev;
+	blk->dev = dev;
 	blk->type = BLK_TYPE_VIRTUAL;
 
 	blk->cdev.size = 0;
-	blk->cdev.name = xstrdup(dev_name(&ramdisk->dev));
+	blk->cdev.name = xstrdup(dev_name(dev));
 	blk->cdev.dev = blk->dev;
 	blk->cdev.ops = &ramdisk_ops;
 	blk->cdev.priv = ramdisk;
 	blk->cdev.flags |= DEVFS_IS_BLOCK_DEV;
-	blk->blockbits = ilog2(sector_size);
+	blk->blockbits = blockbits;
 
 	ret = devfs_create(&blk->cdev);
 	if (ret)
-		return NULL;
+		goto free_cdev_name;
 
 	INIT_LIST_HEAD(&blk->buffered_blocks);
 	INIT_LIST_HEAD(&blk->idle_blocks);
 
 	return ramdisk;
+
+free_cdev_name:
+	free(blk->cdev.name);
+unregister_device:
+	unregister_device(dev);
+free_ramdisk:
+	free(ramdisk);
+
+	return NULL;
 }
 
 struct block_device *ramdisk_get_block_device(struct ramdisk *ramdisk)
-- 
2.47.3




  parent reply	other threads:[~2026-06-26  8:47 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-26  8:42 [PATCH 00/26] block: add support for non-512 byte sectors Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 01/26] nvme: use barebox-appropriate 64-bit type for timeouts Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 02/26] nvme: fix buffer advancement when chunking due to max_hw_sectors Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 03/26] nvme: allow flush opcode Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 04/26] nvme: honor namespace block size for I/O Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 05/26] bootscan: fix detection of GPT Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 06/26] block: clarify that writebuffer_io_len returns sector counts Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 07/26] block: fix wrong type for discard_start/size byte ranges Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 08/26] block: fix discard zeroing too little memory Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 09/26] block: use logical block size for reparse checks Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 10/26] block: require lower bound of sector size to be 512 bytes Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 11/26] filetype: don't hardcode sector size in file_detect_partition_table Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 12/26] block: define helpers for non-512-byte sector support Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 13/26] bootscan: use block size for partition table probe Ahmad Fatoum
2026-06-26  8:42 ` Ahmad Fatoum [this message]
2026-06-26  8:42 ` [PATCH 15/26] efi: block: fix sector size mismatch in block device registration and ops Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 16/26] efi: loader: disk: report block device size in Block I/O Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 17/26] efi: loader: file: report cdev block size in file info Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 18/26] partitions: use byte offset for first partition policy Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 19/26] partitions: dos: allocate correctly sized buffer for dos_partition_desc Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 20/26] partition: support non-512 byte sectors Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 21/26] fs: fat: fix garbage read when writing with bigger block size Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 22/26] fs: fat: support larger block device sectors Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 23/26] usb-storage: preserve READ CAPACITY sector size Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 24/26] fuzz: add 4K-sector partition ramdisk target Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 25/26] commands: parted: prepare use of non-512-byte sectors Ahmad Fatoum
2026-06-26  8:42 ` [PATCH 26/26] commands: parted: exit if block size if not 512 Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260626084608.1388806-15-a.fatoum@barebox.org \
    --to=a.fatoum@barebox.org \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox