[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.0-rc7-EK20170628 (gianluca@gianlinux) (gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) ) #1 SMP Wed Jun 28 16:27:46 CEST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Eurek EK360 i.MX6DL [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c10e6580, node_mem_map ef6f8000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 17 pages/cpu @ef6bb000 s38208 r8192 d23232 u69632 [ 0.000000] pcpu-alloc: s38208 r8192 d23232 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttymxc2,115200 rootwait noswap ip=none noinitrd rootfstype=nilfs2 root=/dev/mmcblk1p3 fec.macaddr=0x7a,0x3f,0x03,0xe3,0xa2,0xff system_rev=0xe3600000 system_serialnr=0x00000000 lcd_type=am1280800n3tz fastboot quiet loglevel=3 console=tty0 imxdrm.legacyfb_depth=32 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1021420K/1048576K available (9216K kernel code, 1044K rwdata, 2648K rodata, 2048K init, 381K bss, 27156K reserved, 0K cma-reserved, 262144K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0a00000 (10208 kB) .init : 0xc0e00000 - 0xc1000000 (2048 kB) .data : 0xc1000000 - 0xc11052c0 (1045 kB) .bss : 0xc110db58 - 0xc116d028 ( 382 kB) [ 0.000000] ftrace: allocating 33822 entries in 100 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] ccm: ldb_di0_sel already changed from reset value: 0 [ 0.000000] ccm: ldb_di1_sel already changed from reset value: 0 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000022] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002154] Console: colour dummy device 80x30 [ 0.002168] console [tty0] enabled [ 0.002191] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000) [ 0.002204] pid_max: default: 32768 minimum: 301 [ 0.002369] Security Framework initialized [ 0.002376] Yama: becoming mindful. [ 0.002402] AppArmor: AppArmor disabled by boot time parameter [ 0.002455] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002463] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003282] CPU: Testing write buffer coherency: ok [ 0.003682] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004156] Setting up static identity map for 0x10100000 - 0x101000a0 [ 0.008683] EFI services will not be available. [ 0.009041] smp: Bringing up secondary CPUs ... [ 0.010027] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.010136] smp: Brought up 1 node, 2 CPUs [ 0.010147] SMP: Total of 2 processors activated (12.00 BogoMIPS). [ 0.010152] CPU: All CPU(s) started in SVC mode. [ 0.011147] devtmpfs: initialized [ 0.021307] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.021705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.021722] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.021991] pinctrl core: initialized pinctrl subsystem [ 0.023956] NET: Registered protocol family 16 [ 0.025670] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.028067] cpuidle: using governor ladder [ 0.028220] cpuidle: using governor menu [ 0.029191] CPU identified as i.MX6DL, silicon rev 1.3 [ 0.038123] vdd1p1: supplied by regulator-dummy [ 0.038717] vdd3p0: supplied by regulator-dummy [ 0.039293] vdd2p5: supplied by regulator-dummy [ 0.039879] vddarm: supplied by regulator-dummy [ 0.040475] vddpu: supplied by regulator-dummy [ 0.041088] vddsoc: supplied by regulator-dummy [ 0.054233] No ATAGs? [ 0.054329] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.054336] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.056248] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.057519] Serial: AMBA PL011 UART driver [ 0.087159] mxs-dma 110000.dma-apbh: initialized [ 0.096390] i2c i2c-0: IMX I2C adapter registered [ 0.096409] i2c i2c-0: can't use DMA, using PIO instead. [ 0.097015] i2c i2c-1: IMX I2C adapter registered [ 0.097030] i2c i2c-1: can't use DMA, using PIO instead. [ 0.097556] i2c i2c-2: IMX I2C adapter registered [ 0.097570] i2c i2c-2: can't use DMA, using PIO instead. [ 0.098655] media: Linux media interface: v0.10 [ 0.098710] Linux video capture interface: v2.00 [ 0.098801] pps_core: LinuxPPS API ver. 1 registered [ 0.098808] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.098829] PTP clock support registered [ 0.099919] Advanced Linux Sound Architecture Driver Initialized. [ 0.101725] clocksource: Switched to clocksource mxc_timer1 [ 0.173399] VFS: Disk quotas dquot_6.6.0 [ 0.173479] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.187438] NET: Registered protocol family 2 [ 0.188226] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.188308] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.188439] TCP: Hash tables configured (established 8192 bind 8192) [ 0.188608] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.188646] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.188908] NET: Registered protocol family 1 [ 0.188942] PCI: CLS 0 bytes, default 64 [ 0.189806] hw perfevents: no interrupt-affinity property for /soc/pmu, guessing. [ 0.189981] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.194100] audit: initializing netlink subsys (disabled) [ 0.194303] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1 [ 0.195375] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.195511] zbud: loaded [ 0.196096] NILFS version 2 loaded [ 0.205497] bounce: pool size: 64 pages [ 0.205559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.205797] io scheduler noop registered [ 0.205803] io scheduler deadline registered [ 0.205882] io scheduler cfq registered (default) [ 0.205889] io scheduler mq-deadline registered [ 0.205894] io scheduler kyber registered [ 0.216452] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.216461] imx-sdma 20ec000.sdma: Falling back to user helper [ 0.223525] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.226120] Serial: AMBA driver [ 0.227013] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 23, base_baud = 5000000) is a IMX [ 0.227958] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 68, base_baud = 5000000) is a IMX [ 0.228023] console [ttymxc2] enabled [ 0.233835] etnaviv gpu-subsystem: bound 134000.gpu (ops 0xc0a9040c) [ 0.234007] etnaviv gpu-subsystem: bound 130000.gpu (ops 0xc0a9040c) [ 0.234019] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 0.267122] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 0.299671] [drm] Initialized etnaviv 1.1.0 20151214 for gpu-subsystem on minor 0 [ 0.301955] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.301960] [drm] No driver support for vblank timestamp query. [ 0.302112] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xc0a8eef0) [ 0.302227] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xc0a8eef0) [ 0.302398] imx-drm display-subsystem: failed to bind 2000000.aips-bus:ldb@020e0008 (ops 0xc0a8f53c): -517 [ 0.302505] imx-drm display-subsystem: master bind failed: -517 [ 0.302549] imx-ipuv3 2400000.ipu: IPUv3H probed [ 0.305467] libphy: Fixed MDIO Bus: probed [ 0.414216] pps pps0: new PPS source ptp0 [ 0.418575] libphy: fec_enet_mii_bus: probed [ 0.419134] fec 2188000.ethernet eth0: registered PHC device 0 [ 0.428234] rtc rtc0: invalid alarm value: 2017-7-22 33:68:0 [ 0.428492] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 0.430901] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 0.431960] i2c /dev entries driver [ 0.435212] sdhci: Secure Digital Host Controller Interface driver [ 0.435218] sdhci: Copyright(c) Pierre Ossman [ 0.435223] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.436300] sdhci-esdhc-imx 2194000.usdhc: Failed getting OCR mask: 0 [ 0.436856] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.462765] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.481763] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 0.482565] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 0.482674] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.485934] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.500925] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.503711] mmc0: queuing unknown CIS tuple 0x80 (6 bytes) [ 0.507194] mmc0: queuing unknown CIS tuple 0x80 (8 bytes) [ 0.508591] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.511684] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.516168] mmc0: queuing unknown CIS tuple 0x80 (5 bytes) [ 0.523041] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.525065] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.526156] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.528453] random: fast init done [ 0.531107] mmc0: new high speed SDIO card at address 0001 [ 0.533948] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 0.577769] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 0.577861] mmc1: host does not support reading read-only switch, assuming write-enable [ 0.578570] ledtrig-cpu: registered to indicate activity on CPUs [ 0.580894] ashmem: initialized [ 0.585526] mmc1: new high speed SDHC card at address 0001 [ 0.586917] mmcblk1: mmc1:0001 ASTC 3.72 GiB [ 0.587724] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 0.589177] mmcblk1: p1 p2 p3 [ 0.619578] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 0.639600] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 0.641357] NET: Registered protocol family 10 [ 0.642535] Segment Routing with IPv6 [ 0.642619] mip6: Mobile IPv6 [ 0.642630] NET: Registered protocol family 17 [ 0.642643] mpls_gso: MPLS GSO support [ 0.644068] ThumbEE CPU extension supported. [ 0.644084] Registering SWP/SWPB emulation handler [ 0.644973] registered taskstats version 1 [ 0.645050] zswap: loaded using pool lzo/zbud [ 0.658283] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.658291] [drm] No driver support for vblank timestamp query. [ 0.658376] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xc0a8eef0) [ 0.658425] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xc0a8eef0) [ 0.658617] imx-drm display-subsystem: failed to bind 2000000.aips-bus:ldb@020e0008 (ops 0xc0a8f53c): -517 [ 0.658728] imx-drm display-subsystem: master bind failed: -517 [ 0.661016] rtc-pcf8563 0-0051: setting system clock to 2017-06-28 16:17:37 UTC (1498666657) [ 0.661863] PM: Hibernation image not present or could not be loaded. [ 0.662887] usb_otg_vbus: disabling [ 0.662895] ALSA device list: [ 0.662902] #0: imx6-ek360-sgtl5000 [ 0.818523] mmc2: new DDR MMC card at address 0001 [ 0.819404] mmcblk2: mmc2:0001 MMC04G 3.58 GiB [ 0.819850] mmcblk2boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 0.820270] mmcblk2boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 0.820685] mmcblk2rpmb: mmc2:0001 MMC04G partition 3 128 KiB [ 0.825679] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.825685] [drm] No driver support for vblank timestamp query. [ 0.825853] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xc0a8eef0) [ 0.825902] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xc0a8eef0) [ 0.826083] imx-drm display-subsystem: failed to bind 2000000.aips-bus:ldb@020e0008 (ops 0xc0a8f53c): -517 [ 0.826189] imx-drm display-subsystem: master bind failed: -517 [ 1.079206] VFS: Mounted root (nilfs2 filesystem) readonly on device 179:3. [ 1.087070] Freeing unused kernel memory: 2048K [ 2.537016] systemd-udevd[232]: starting version 215 [ 2.999566] imx-sdma 20ec000.sdma: loaded firmware 1.1 [ 3.000563] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.000569] [drm] No driver support for vblank timestamp query. [ 3.000648] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xc0a8eef0) [ 3.000691] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xc0a8eef0) [ 3.000869] imx-drm display-subsystem: failed to bind 2000000.aips-bus:ldb@020e0008 (ops 0xc0a8f53c): -517 [ 3.001036] imx-drm display-subsystem: master bind failed: -517 [ 3.024858] of_pwm_get(): PWM chip not found [ 3.059329] panel-simple panel: panel supply power not found, using dummy regulator [ 3.132595] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.132601] [drm] No driver support for vblank timestamp query. [ 3.132687] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xc0a8eef0) [ 3.132731] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xc0a8eef0) [ 3.132910] imx-drm display-subsystem: failed to bind 2000000.aips-bus:ldb@020e0008 (ops 0xc0a8f53c): -517 [ 3.133076] imx-drm display-subsystem: master bind failed: -517 [ 3.134066] of_pwm_get(): PWM chip not found [ 3.135453] panel-simple panel: panel supply power not found, using dummy regulator [ 3.182902] usbcore: registered new interface driver usbfs [ 3.182977] usbcore: registered new interface driver hub [ 3.183779] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.183786] [drm] No driver support for vblank timestamp query. [ 3.183865] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xc0a8eef0) [ 3.183908] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xc0a8eef0) [ 3.184082] imx-drm display-subsystem: failed to bind 2000000.aips-bus:ldb@020e0008 (ops 0xc0a8f53c): -517 [ 3.184189] imx-drm display-subsystem: master bind failed: -517 [ 3.187295] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.187301] [drm] No driver support for vblank timestamp query. [ 3.187377] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xc0a8eef0) [ 3.187422] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xc0a8eef0) [ 3.187686] imx-drm display-subsystem: bound 2000000.aips-bus:ldb@020e0008 (ops 0xc0a8f53c) [ 3.198049] usbcore: registered new device driver usb [ 3.211045] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.251726] CAN device driver interface [ 3.262575] flexcan 2090000.flexcan: device registered (reg_base=f1600000, irq=29) [ 3.282825] Console: switching to colour frame buffer device 160x50 [ 3.304466] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.321845] imx-drm display-subsystem: fb0: frame buffer device [ 3.324638] coda 2040000.vpu: unable to alloc iram [ 3.334412] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 3.370277] coda 2040000.vpu: Firmware code revision: 46063 [ 3.370289] coda 2040000.vpu: Initialized CODA960. [ 3.370295] coda 2040000.vpu: Unsupported firmware version: 3.1.1 [ 3.370365] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.370409] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.371162] coda 2040000.vpu: codec registered as /dev/video[0-1] [ 3.385828] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.386169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.386180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.386187] usb usb1: Product: EHCI Host Controller [ 3.386194] usb usb1: Manufacturer: Linux 4.12.0-rc7-EK20170628 ehci_hcd [ 3.386201] usb usb1: SerialNumber: ci_hdrc.1 [ 3.387070] hub 1-0:1.0: USB hub found [ 3.387151] hub 1-0:1.0: 1 port detected [ 3.567021] sx8656_ek: loading out-of-tree module taints kernel. [ 3.580962] input: SX8656-EK I2C Touchscreen as /devices/soc0/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-0048/input/input0 [ 3.586941] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 64 bytes/write [ 3.846110] mousedev: PS/2 mouse device common for all mice [ 3.955887] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 3.966161] usbcore: registered new interface driver brcmfmac [ 4.348541] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 7.050166] NILFS (mmcblk1p3): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds [ 7.720828] device-mapper: uevent: version 1.0.3 [ 7.721848] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 8.280900] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null) [ 8.741140] random: crng init done [ 9.419261] Generic PHY 2188000.ethernet-1:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet-1:03, irq=-1) [ 9.419597] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.328420] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.478237] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 12.478271] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.981698] systemd-logind[1619]: New seat seat0. [ 18.003251] systemd-logind[1619]: Failed to start user service: Unknown unit: user@0.service [ 18.007220] systemd-logind[1619]: New session c1 of user root.