From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.telit.com ([88.37.127.140]) by canuck.infradead.org with esmtp (Exim 4.72 #1 (Red Hat Linux)) id 1PSUs4-00053l-HD for barebox@lists.infradead.org; Tue, 14 Dec 2010 13:24:50 +0000 From: Fabio Porcedda Date: Tue, 14 Dec 2010 14:20:37 +0100 Message-ID: <24A9345B397CD24AA76A4E82E237956545F839C951@XCHTS.tmt.telital.com> Content-Language: en-US MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: loady command failure To: "barebox@lists.infradead.org" Hi all, I'm using Barebox v2010.12.0 (at91sam9260ek_defconfig + loadb + loady) compiled with codesourcery 2010.q1 on the board Atmel AT91SAM9260-EK, the loadb command it's woking fine, but the loady command fails every time, with ckermit and minicom (Ubuntu 10.10): kermit log:" Retry 0: NAK on sector ... Retry 0: NAK on sector Retry 0: Retry Count Exceeded Transfer incomplete ************************* SEND-class command failed. Packets sent: 166 Retransmissions: 0 Timeouts: 0 Damaged packets: 0 " The loadb/loady command of U-Boot v2010.09 on the same AT91SAM9260-EK is working fine. HW/SW Configuration: PC: Ubuntu 10.10 + ckermit (211-14) + minicom (2.4-2ubuntu1) .kermrc: set line /dev/ttyS0 set speed 115200 set carrier-watch off set handshake none set flow-control none robust set file type bin set file name lit set rec pack 1000 set send pack 1000 set window 5 minicom config: Bps/Par/Bits : 115200 8N1 Hardware Flow Control : No Software Flow Control : No Thanks in advance for any help Fabio Porcedda Software Devoloper - R&D Cagliari Telit Communications S.p.A. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox