* loady command failure
@ 2010-12-14 13:20 Fabio Porcedda
0 siblings, 0 replies; only message in thread
From: Fabio Porcedda @ 2010-12-14 13:20 UTC (permalink / raw)
To: barebox
Hi all,
I'm using Barebox v2010.12.0 (at91sam9260ek_defconfig + loadb + loady)
compiled with codesourcery 2010.q1 on the board Atmel AT91SAM9260-EK,
the loadb command it's woking fine,
but the loady command fails every time, with ckermit and minicom (Ubuntu 10.10):
kermit log:"
Retry 0: NAK on sector
...
Retry 0: NAK on sector
Retry 0: Retry Count Exceeded
Transfer incomplete
*************************
SEND-class command failed.
Packets sent: 166
Retransmissions: 0
Timeouts: 0
Damaged packets: 0
"
The loadb/loady command of U-Boot v2010.09 on the same AT91SAM9260-EK is working fine.
HW/SW Configuration:
PC: Ubuntu 10.10 + ckermit (211-14) + minicom (2.4-2ubuntu1)
.kermrc:
set line /dev/ttyS0
set speed 115200
set carrier-watch off
set handshake none
set flow-control none
robust
set file type bin
set file name lit
set rec pack 1000
set send pack 1000
set window 5
minicom config:
Bps/Par/Bits : 115200 8N1
Hardware Flow Control : No
Software Flow Control : No
Thanks in advance for any help
Fabio Porcedda
Software Devoloper - R&D Cagliari
Telit Communications S.p.A.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-12-14 13:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-12-14 13:20 loady command failure Fabio Porcedda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox