From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hnnRq-0007lB-Uv for barebox@lists.infradead.org; Wed, 17 Jul 2019 17:10:36 +0000 Received: from gallifrey.ext.pengutronix.de ([2001:67c:670:201:5054:ff:fe8d:eefb] helo=a3f-osx.local) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1hnnRp-0002Ko-ON for barebox@lists.infradead.org; Wed, 17 Jul 2019 19:10:33 +0200 References: <20190717170604.23732-1-a.fatoum@pengutronix.de> <20190717170604.23732-2-a.fatoum@pengutronix.de> From: Ahmad Fatoum Message-ID: <300da74e-fa20-f762-0203-e9351089b636@pengutronix.de> Date: Wed, 17 Jul 2019 19:10:33 +0200 MIME-Version: 1.0 In-Reply-To: <20190717170604.23732-2-a.fatoum@pengutronix.de> Content-Language: en-US List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized To: barebox@lists.infradead.org On 17/7/19 19:05, Ahmad Fatoum wrote: > The cpu_is_mx6* macros rely on __imx_cpu_type, which is initialized > dependent on device tree compatible at "postcore" init-level imx_init. > > The imx6q-ccm driver, which uses the cpu_is_mx6* macros, is registered > at "core" init-level, however. This results on the macro always returning > false. > > Fix this by using the cpu_mx6_is_mx6* family of macros instead. > These already require that that CPU is a MX6, which is safe because the > the driver only matches against "fsl,imx6q-ccm". > > Only exception is the video5 pll reparenting. Here we will just > maintain the old behavior as we will drop the if clause in a following > commit anyway. > > Reported-by: Andrey Smirnov > Signed-off-by: Ahmad Fatoum While it's clearly the right thing to do, I have no affected boards (Dual or Plus) sitting on my desk, so the change is untested. A Tested-by would be appreciated, thanks! > --- > drivers/clk/imx/clk-imx6.c | 11 +++++------ > 1 file changed, 5 insertions(+), 6 deletions(-) > > diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c > index 35b995dae24e..0b71a1322466 100644 > --- a/drivers/clk/imx/clk-imx6.c > +++ b/drivers/clk/imx/clk-imx6.c > @@ -59,9 +59,9 @@ > static struct clk *clks[IMX6QDL_CLK_END]; > static struct clk_onecell_data clk_data; > > -static inline int cpu_is_plus(void) > +static inline int cpu_mx6_is_plus(void) > { > - return cpu_is_mx6qp() || cpu_is_mx6dp(); > + return cpu_mx6_is_mx6qp() || cpu_mx6_is_mx6dp(); > } > > static const char *step_sels[] = { > @@ -341,8 +341,7 @@ static void imx6_add_video_clks(void __iomem *anab, void __iomem *cb) > clk_set_parent(clks[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]); > clk_set_parent(clks[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]); > > - if ((imx_silicon_revision() != IMX_CHIP_REV_1_0) || > - cpu_is_mx6dl()) { > + if (imx_silicon_revision() != IMX_CHIP_REV_1_0) { > clk_set_parent(clks[IMX6QDL_CLK_LDB_DI0_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]); > clk_set_parent(clks[IMX6QDL_CLK_LDB_DI1_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]); > } > @@ -418,7 +417,7 @@ static int imx6_ccm_probe(struct device_d *dev) > clks[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); > clks[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); > clks[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); > - if (cpu_is_plus()) > + if (cpu_mx6_is_plus()) > clks[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels_plus, ARRAY_SIZE(enfc_sels_plus)); > else > clks[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); > @@ -469,7 +468,7 @@ static int imx6_ccm_probe(struct device_d *dev) > clks[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); > clks[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); > clks[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); > - if (cpu_is_mx6dl()) > + if (cpu_mx6_is_mx6dl()) > clks[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8); > else > clks[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox