* [PATCH] mci: core: add device parameter for eMMC boot ack
@ 2020-05-13 11:46 Lucas Stach
2020-05-18 7:08 ` Sascha Hauer
0 siblings, 1 reply; 6+ messages in thread
From: Lucas Stach @ 2020-05-13 11:46 UTC (permalink / raw)
To: barebox
This adds an easy way to enable the boot acknowledge function of
a eMMC device, without the need to frob the EXT_CSD setting via
the mmc_extcsd command.
A boot ack is required whenever the boot partitions are read via
the fast initialization boot protocol.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
drivers/mci/mci-core.c | 33 +++++++++++++++++++++++++++------
include/mci.h | 2 ++
2 files changed, 29 insertions(+), 6 deletions(-)
diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index f3718327f18d..d33bc0c1a41e 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -516,6 +516,7 @@ static int mmc_change_freq(struct mci *mci)
mci->ext_csd_part_config = mci->ext_csd[EXT_CSD_PARTITION_CONFIG];
mci->bootpart = (mci->ext_csd_part_config >> 3) & 0x7;
+ mci->boot_ack_enable = (mci->ext_csd_part_config >> 6) & 0x1;
}
return 0;
@@ -1592,6 +1593,17 @@ static int mci_set_boot(struct param_d *param, void *priv)
EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
}
+static int mci_set_boot_ack(struct param_d *param, void *priv)
+{
+ struct mci *mci = priv;
+
+ mci->ext_csd_part_config &= ~(0x1 << 6);
+ mci->ext_csd_part_config |= mci->boot_ack_enable << 6;
+
+ return mci_switch(mci,
+ EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
+}
+
static const char *mci_boot_names[] = {
"disabled",
"boot0",
@@ -1672,6 +1684,7 @@ static int mci_card_probe(struct mci *mci)
{
struct mci_host *host = mci->host;
int i, rc, disknum, ret;
+ bool has_bootpart = false;
if (host->card_present && !host->card_present(host) &&
!host->non_removable) {
@@ -1741,12 +1754,20 @@ static int mci_card_probe(struct mci *mci)
rc = mci_register_partition(part);
if (IS_ENABLED(CONFIG_MCI_MMC_BOOT_PARTITIONS) &&
- part->area_type == MMC_BLK_DATA_AREA_BOOT &&
- !mci->param_boot) {
- mci->param_boot = dev_add_param_enum(&mci->dev, "boot",
- mci_set_boot, NULL, &mci->bootpart,
- mci_boot_names, ARRAY_SIZE(mci_boot_names), mci);
- }
+ part->area_type == MMC_BLK_DATA_AREA_BOOT)
+ has_bootpart = true;
+ }
+
+ if (has_bootpart) {
+ mci->param_boot =
+ dev_add_param_enum(&mci->dev, "boot", mci_set_boot,
+ NULL, &mci->bootpart, mci_boot_names,
+ ARRAY_SIZE(mci_boot_names), mci);
+
+ mci->param_boot_ack =
+ dev_add_param_bool(&mci->dev, "boot_ack",
+ mci_set_boot_ack, NULL,
+ &mci->boot_ack_enable, mci);
}
dev_dbg(&mci->dev, "SD Card successfully added\n");
diff --git a/include/mci.h b/include/mci.h
index cf9d188c5c21..587c76678c96 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -462,7 +462,9 @@ struct mci {
char *ext_csd;
int probe;
struct param_d *param_boot;
+ struct param_d *param_boot_ack;
int bootpart;
+ int boot_ack_enable;
struct mci_part part[MMC_NUM_PHY_PARTITION];
int nr_parts;
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] mci: core: add device parameter for eMMC boot ack
2020-05-13 11:46 [PATCH] mci: core: add device parameter for eMMC boot ack Lucas Stach
@ 2020-05-18 7:08 ` Sascha Hauer
2020-05-18 9:06 ` Lucas Stach
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-05-18 7:08 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Wed, May 13, 2020 at 01:46:36PM +0200, Lucas Stach wrote:
> This adds an easy way to enable the boot acknowledge function of
> a eMMC device, without the need to frob the EXT_CSD setting via
> the mmc_extcsd command.
> A boot ack is required whenever the boot partitions are read via
> the fast initialization boot protocol.
>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> drivers/mci/mci-core.c | 33 +++++++++++++++++++++++++++------
> include/mci.h | 2 ++
> 2 files changed, 29 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> index f3718327f18d..d33bc0c1a41e 100644
> --- a/drivers/mci/mci-core.c
> +++ b/drivers/mci/mci-core.c
> @@ -516,6 +516,7 @@ static int mmc_change_freq(struct mci *mci)
>
> mci->ext_csd_part_config = mci->ext_csd[EXT_CSD_PARTITION_CONFIG];
> mci->bootpart = (mci->ext_csd_part_config >> 3) & 0x7;
> + mci->boot_ack_enable = (mci->ext_csd_part_config >> 6) & 0x1;
> }
>
> return 0;
> @@ -1592,6 +1593,17 @@ static int mci_set_boot(struct param_d *param, void *priv)
> EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
> }
>
> +static int mci_set_boot_ack(struct param_d *param, void *priv)
> +{
> + struct mci *mci = priv;
> +
> + mci->ext_csd_part_config &= ~(0x1 << 6);
> + mci->ext_csd_part_config |= mci->boot_ack_enable << 6;
> +
> + return mci_switch(mci,
> + EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
> +}
There's only one correct setting for each board or SoC. Instead of
letting the user choose between right and wrong, can't we add a hook to
be called from the board/SoC code? A device tree property might be an
option as well, something like barebox,enable-boot-ack.
There are also bits to change the bus width after power up which might
need adjustments which would mean another parameter with the current
approach.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] mci: core: add device parameter for eMMC boot ack
2020-05-18 7:08 ` Sascha Hauer
@ 2020-05-18 9:06 ` Lucas Stach
2020-08-31 12:20 ` Jan Lübbe
2022-05-20 4:34 ` Ahmad Fatoum
2 siblings, 0 replies; 6+ messages in thread
From: Lucas Stach @ 2020-05-18 9:06 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Am Montag, den 18.05.2020, 09:08 +0200 schrieb Sascha Hauer:
> On Wed, May 13, 2020 at 01:46:36PM +0200, Lucas Stach wrote:
> > This adds an easy way to enable the boot acknowledge function of
> > a eMMC device, without the need to frob the EXT_CSD setting via
> > the mmc_extcsd command.
> > A boot ack is required whenever the boot partitions are read via
> > the fast initialization boot protocol.
> >
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > ---
> > drivers/mci/mci-core.c | 33 +++++++++++++++++++++++++++------
> > include/mci.h | 2 ++
> > 2 files changed, 29 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> > index f3718327f18d..d33bc0c1a41e 100644
> > --- a/drivers/mci/mci-core.c
> > +++ b/drivers/mci/mci-core.c
> > @@ -516,6 +516,7 @@ static int mmc_change_freq(struct mci *mci)
> >
> > mci->ext_csd_part_config = mci->ext_csd[EXT_CSD_PARTITION_CONFIG];
> > mci->bootpart = (mci->ext_csd_part_config >> 3) & 0x7;
> > + mci->boot_ack_enable = (mci->ext_csd_part_config >> 6) & 0x1;
> > }
> >
> > return 0;
> > @@ -1592,6 +1593,17 @@ static int mci_set_boot(struct param_d *param, void *priv)
> > EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
> > }
> >
> > +static int mci_set_boot_ack(struct param_d *param, void *priv)
> > +{
> > + struct mci *mci = priv;
> > +
> > + mci->ext_csd_part_config &= ~(0x1 << 6);
> > + mci->ext_csd_part_config |= mci->boot_ack_enable << 6;
> > +
> > + return mci_switch(mci,
> > + EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
> > +}
>
> There's only one correct setting for each board or SoC. Instead of
> letting the user choose between right and wrong, can't we add a hook to
> be called from the board/SoC code? A device tree property might be an
> option as well, something like barebox,enable-boot-ack.
A DT property might work, but my initial line of thinking was to set
this from a platform specific barebox_update call, where having the
parameter would certainly help to keep some sort of abstraction.
Regards,
Lucas
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] mci: core: add device parameter for eMMC boot ack
2020-05-18 7:08 ` Sascha Hauer
2020-05-18 9:06 ` Lucas Stach
@ 2020-08-31 12:20 ` Jan Lübbe
2022-05-20 4:34 ` Ahmad Fatoum
2 siblings, 0 replies; 6+ messages in thread
From: Jan Lübbe @ 2020-08-31 12:20 UTC (permalink / raw)
To: Sascha Hauer, Lucas Stach; +Cc: barebox
On Mon, 2020-05-18 at 09:08 +0200, Sascha Hauer wrote:
> There's only one correct setting for each board or SoC. Instead of
> letting the user choose between right and wrong, can't we add a hook
> to be called from the board/SoC code? A device tree property might be
> an option as well, something like barebox,enable-boot-ack.
>
> There are also bits to change the bus width after power up which
> might need adjustments which would mean another parameter with the
> current approach.
If I remember the i.MX6 eMMC boot process correctly, there is no single
correct configuration, even for a fixed HW layout. The eFUSE and eMMC
EXT-CDS configuration just needs to match.
Instead of trying to handle all the corner cases correctly (which is
hard to test without permanently fusing HW), I'd prefer to just make it
straight-forward to set and inspect these values (via a command or
device parameters). Then these would be set once during board
manufacturing/bring-up.
After bring-up, the value in DT would be redundant configuration and
could lead to confusion if it conflicts with the FUSEs.
Regards,
Jan
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] mci: core: add device parameter for eMMC boot ack
2020-05-18 7:08 ` Sascha Hauer
2020-05-18 9:06 ` Lucas Stach
2020-08-31 12:20 ` Jan Lübbe
@ 2022-05-20 4:34 ` Ahmad Fatoum
2022-05-30 11:40 ` Sascha Hauer
2 siblings, 1 reply; 6+ messages in thread
From: Ahmad Fatoum @ 2022-05-20 4:34 UTC (permalink / raw)
To: Sascha Hauer, Lucas Stach; +Cc: barebox
Hello Sascha,
On 18.05.20 09:08, Sascha Hauer wrote:
> On Wed, May 13, 2020 at 01:46:36PM +0200, Lucas Stach wrote:
>> This adds an easy way to enable the boot acknowledge function of
>> a eMMC device, without the need to frob the EXT_CSD setting via
>> the mmc_extcsd command.
>> A boot ack is required whenever the boot partitions are read via
>> the fast initialization boot protocol.
>>
>> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
>> ---
>> drivers/mci/mci-core.c | 33 +++++++++++++++++++++++++++------
>> include/mci.h | 2 ++
>> 2 files changed, 29 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
>> index f3718327f18d..d33bc0c1a41e 100644
>> --- a/drivers/mci/mci-core.c
>> +++ b/drivers/mci/mci-core.c
>> @@ -516,6 +516,7 @@ static int mmc_change_freq(struct mci *mci)
>>
>> mci->ext_csd_part_config = mci->ext_csd[EXT_CSD_PARTITION_CONFIG];
>> mci->bootpart = (mci->ext_csd_part_config >> 3) & 0x7;
>> + mci->boot_ack_enable = (mci->ext_csd_part_config >> 6) & 0x1;
>> }
>>
>> return 0;
>> @@ -1592,6 +1593,17 @@ static int mci_set_boot(struct param_d *param, void *priv)
>> EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
>> }
>>
>> +static int mci_set_boot_ack(struct param_d *param, void *priv)
>> +{
>> + struct mci *mci = priv;
>> +
>> + mci->ext_csd_part_config &= ~(0x1 << 6);
>> + mci->ext_csd_part_config |= mci->boot_ack_enable << 6;
>> +
>> + return mci_switch(mci,
>> + EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
>> +}
>
> There's only one correct setting for each board or SoC. Instead of
> letting the user choose between right and wrong, can't we add a hook to
> be called from the board/SoC code? A device tree property might be an
> option as well, something like barebox,enable-boot-ack.
>
> There are also bits to change the bus width after power up which might
> need adjustments which would mean another parameter with the current
> approach.
There hasn't been any progress here for 2 years. Sascha, can we just
take this patch? Even if we add code in future to have this happen as
part of eMMC/SoC init, a device parameter to easily check
the current configuration would still be useful.
Cheers,
Ahmad
>
> Sascha
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] mci: core: add device parameter for eMMC boot ack
2022-05-20 4:34 ` Ahmad Fatoum
@ 2022-05-30 11:40 ` Sascha Hauer
0 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2022-05-30 11:40 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox
On Fri, May 20, 2022 at 06:34:43AM +0200, Ahmad Fatoum wrote:
> Hello Sascha,
>
> On 18.05.20 09:08, Sascha Hauer wrote:
> > On Wed, May 13, 2020 at 01:46:36PM +0200, Lucas Stach wrote:
> >> This adds an easy way to enable the boot acknowledge function of
> >> a eMMC device, without the need to frob the EXT_CSD setting via
> >> the mmc_extcsd command.
> >> A boot ack is required whenever the boot partitions are read via
> >> the fast initialization boot protocol.
> >>
> >> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> >> ---
> >> drivers/mci/mci-core.c | 33 +++++++++++++++++++++++++++------
> >> include/mci.h | 2 ++
> >> 2 files changed, 29 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> >> index f3718327f18d..d33bc0c1a41e 100644
> >> --- a/drivers/mci/mci-core.c
> >> +++ b/drivers/mci/mci-core.c
> >> @@ -516,6 +516,7 @@ static int mmc_change_freq(struct mci *mci)
> >>
> >> mci->ext_csd_part_config = mci->ext_csd[EXT_CSD_PARTITION_CONFIG];
> >> mci->bootpart = (mci->ext_csd_part_config >> 3) & 0x7;
> >> + mci->boot_ack_enable = (mci->ext_csd_part_config >> 6) & 0x1;
> >> }
> >>
> >> return 0;
> >> @@ -1592,6 +1593,17 @@ static int mci_set_boot(struct param_d *param, void *priv)
> >> EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
> >> }
> >>
> >> +static int mci_set_boot_ack(struct param_d *param, void *priv)
> >> +{
> >> + struct mci *mci = priv;
> >> +
> >> + mci->ext_csd_part_config &= ~(0x1 << 6);
> >> + mci->ext_csd_part_config |= mci->boot_ack_enable << 6;
> >> +
> >> + return mci_switch(mci,
> >> + EXT_CSD_PARTITION_CONFIG, mci->ext_csd_part_config);
> >> +}
> >
> > There's only one correct setting for each board or SoC. Instead of
> > letting the user choose between right and wrong, can't we add a hook to
> > be called from the board/SoC code? A device tree property might be an
> > option as well, something like barebox,enable-boot-ack.
> >
> > There are also bits to change the bus width after power up which might
> > need adjustments which would mean another parameter with the current
> > approach.
>
> There hasn't been any progress here for 2 years. Sascha, can we just
> take this patch? Even if we add code in future to have this happen as
> part of eMMC/SoC init, a device parameter to easily check
> the current configuration would still be useful.
Ok then, let's go for it.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-05-30 11:42 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-13 11:46 [PATCH] mci: core: add device parameter for eMMC boot ack Lucas Stach
2020-05-18 7:08 ` Sascha Hauer
2020-05-18 9:06 ` Lucas Stach
2020-08-31 12:20 ` Jan Lübbe
2022-05-20 4:34 ` Ahmad Fatoum
2022-05-30 11:40 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox