From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 30.mail-out.ovh.net ([213.186.62.213]) by bombadil.infradead.org with smtp (Exim 4.69 #1 (Red Hat Linux)) id 1Nu4JK-0007Fd-8v for barebox@lists.infradead.org; Tue, 23 Mar 2010 13:38:26 +0000 Message-ID: <4BA8C44A.1080807@eukrea.com> Date: Tue, 23 Mar 2010 14:38:18 +0100 From: =?ISO-8859-1?Q?Eric_B=E9nard?= MIME-Version: 1.0 References: <20100323133217.GA26177@darwin> In-Reply-To: <20100323133217.GA26177@darwin> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Barebox working on freescale-mx25-3-stack? To: Matthias Kaehlcke Cc: "barebox@lists.infradead.org" Hi Matthias, Le 23/03/2010 14:32, Matthias Kaehlcke a =E9crit : > i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for > this purpose i built barebox with the freescale-mx25-3-stack > defconfig, using the toolchain provided by the Freescale BSP (i also > tried it with a custom one). i then dumped the barebox.bin on a MMC > card, plugged the card into the socket of the board and switched the > board on, but nothing happened :( > > booting u-boot or redboot from MMC succeeds, so the settings of SW21 > and SW22 shouldn't be the problem > > is barebox supposed to work on this board or is the port still in > preliminary state? > you can check the patch I sent last friday, it works fine on our i.MX25 = board for NAND boot (MMC boot not tested yet). I'll post an updated version of the patch in a few days as per Sascha's = comments + a few tuning in the env. Eric _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox