From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from h51baff8c.k3918.sta.perspektivbredband.net ([81.186.255.140] helo=fg-dc1.flatfrog.local) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1POA1V-0001mo-OI for barebox@lists.infradead.org; Thu, 02 Dec 2010 14:20:39 +0000 Message-ID: <4CF7AB25.3010604@flatfrog.com> Date: Thu, 2 Dec 2010 15:20:21 +0100 From: Orjan Friberg MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Barebox on a 3730 To: barebox@lists.infradead.org Hi, We have successfully used Barebox as bootloader on one of our own boards with an OMAP 3530. Same board, but with a 3730 instead (and a few auxiliary components changed) I'm getting completely garbled output on the serial port. I tried changing the baud rate from 115200 to 38400 and 19200 to no avail. Anyone here rambooted a 3730 with barebox? (Just to rule out that I need to do any software changes.) When setting the board in boot mode "60" is printed on the serial port by the boot ROM, the same way "40W" was printed by the 3530 so it's not like the serial port isn't working at all. I can bootstrap via either USB or serial port. We're using the omap3530_beagle_per_uart_defconfig. Thanks, Orjan -- Orjan Friberg FlatFrog Laboratories AB _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox