From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 64.mail-out.ovh.net ([91.121.185.65]) by canuck.infradead.org with smtp (Exim 4.72 #1 (Red Hat Linux)) id 1PY36b-0005RT-8x for barebox@lists.infradead.org; Wed, 29 Dec 2010 20:58:45 +0000 Message-ID: <4D1BA102.9030509@eukrea.com> Date: Wed, 29 Dec 2010 21:58:42 +0100 From: =?ISO-8859-1?Q?Eric_B=E9nard?= MIME-Version: 1.0 References: <39A4B204C321D34DA3490E3B119D5A6C68BF775745@SBS2008.wellsense.local>, <4D1B9E92.2010403@eukrea.com> <39A4B204C321D34DA3490E3B119D5A6C68BF775746@SBS2008.wellsense.local> In-Reply-To: <39A4B204C321D34DA3490E3B119D5A6C68BF775746@SBS2008.wellsense.local> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: 4096 page NAND boot support on iMX35 PDK board To: Boaz Ben-David Cc: "barebox@lists.infradead.org" On 29/12/2010 21:51, Boaz Ben-David wrote: > Thanks for the quick response, what I would like to know is where is the actual entry point to the code, > i.e. the "main()" function... > I'm asking this because when I try to boot barebox on my board with the different NAND I don't even get a prompt on > the serial line so I figured the image is not read properly. > check in this file, the imx_nand_load_image function where only 512 & 2k nand are handled. Are you using internal or external boot ? Eric _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox