From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: barebox <barebox@lists.infradead.org>
Subject: [PATCH 4/4] ARM STM/i.MX: Add the reset control of LCD
Date: Tue, 04 Jan 2011 15:35:44 +0100 [thread overview]
Message-ID: <4D233040.3090606@free-electrons.com> (raw)
Video controller of STM allow to control the reset bit of an external
LCD controller. When reset_lcd is set, CTRL1_RESET bit is used to
enable and disable LCD.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/mach-stm/include/mach/fb.h | 1 +
drivers/video/stm.c | 11 +++++++++++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-stm/include/mach/fb.h b/arch/arm/mach-stm/include/mach/fb.h
index f899433..3d40479 100644
--- a/arch/arm/mach-stm/include/mach/fb.h
+++ b/arch/arm/mach-stm/include/mach/fb.h
@@ -39,6 +39,7 @@ struct imx_fb_videomode {
unsigned ld_intf_width; /**< refer STMLCDIF_* macros */
unsigned data_mode;
u32 bits_per_pixel;
+ unsigned reset_lcd; /** use LCD_RESET signal*/
};
#endif /* __MACH_FB_H */
diff --git a/drivers/video/stm.c b/drivers/video/stm.c
index 3dc2abe..b1bb9b3 100644
--- a/drivers/video/stm.c
+++ b/drivers/video/stm.c
@@ -48,6 +48,7 @@
# define CTRL1_FIFO_CLEAR (1 << 21)
# define SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
# define GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
+# define CTRL1_RESET (1 << 0)
#ifdef CONFIG_ARCH_IMX28
# define HW_LCDIF_CTRL2 0x20
@@ -271,6 +272,11 @@ static void stmfb_enable_controller(struct fb_info *fb_info)
/* stop FIFO reset */
writel(CTRL1_FIFO_CLEAR, fbi->base + HW_LCDIF_CTRL1 + BIT_CLR);
+
+ /* enable LCD using LCD_RESET signal*/
+ if (fbi->pdata->reset_lcd)
+ writel(CTRL1_RESET, fbi->base + HW_LCDIF_CTRL1 + BIT_SET);
+
/* start the engine right now */
writel(CTRL_RUN, fbi->base + HW_LCDIF_CTRL + BIT_SET);
}
@@ -281,6 +287,11 @@ static void stmfb_disable_controller(struct fb_info *fb_info)
unsigned loop;
uint32_t reg;
+
+ /* disable LCD using LCD_RESET signal*/
+ if (fbi->pdata->reset_lcd)
+ writel(CTRL1_RESET, fbi->base + HW_LCDIF_CTRL1 + BIT_CLR);
+
/*
* Even if we disable the controller here, it will still continue
* until its FIFOs are running out of data
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2011-01-04 14:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D233040.3090606@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox