Thanks Renaud, for the instruction. I will try this over weekend and will get back to you if I am having any problem. Appreciate your response. Regards Shakil On 9/2/2011 4:10 AM, Renaud Barbier wrote: > Hello Plumbedzero, > Here is what I did: > > make omap3530_beagle_defconfig > make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi- > > I use a 32MB SD card formatted for FAT. > > As per documentation, > I copied the file MLO, barebox.bin as u-boot.bin and normal.scr as > boot.scr (not used yet) on the SD card. > > > > Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) > Reading boot sector > Loading u-boot.bin from mmc > > > barebox 2011.08.0 (Aug 31 2011 - 14:07:34) > > Board: Texas Instrument's Beagle > I2C probe > i2c-omap@i2c-omap0: bus 0 rev3.12 at 100 kHz > ehci@ehci0: USB EHCI 1.00 > NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB > 1,8V 16-bit) > Malloc space: 0x80c00000 -> 0x81000000 (size 4 MB) > Stack space : 0x80bf8000 -> 0x80c00000 (size 32 kB) > Open /dev/env0 No such file or directory > no valid environment found on /dev/env0. Using default environment > running /env/bin/init... > sh: No such file or directory > > Hit any key to stop autoboot: Usage: timeout [OPTION]... > Wait seconds for a timeout. Return 1 if the user intervented > or 0 if a timeout occured > -a interrupt on any key > -c interrupt on ctrl-c > -r interrupt on return > -s silent mode > > > > On 01/09/11 15:08, plumbedZero c wrote: >> Hi Renaud, >> >> Sorry for mailing you but I couldn't stop myself writing to you. I >> have struggled a lot to compile barebox for beagleboard and it >> compiled, however I am not able to load it as I don't get any boot >> prompt after loading it to beagle board. >> >> Can you share the process of compilation and if configuration file >> required. >> >> Also I would be interested in the Hello World program. In case if you >> are able to make it then let me know as well. Hope you dont mind my >> multiple requests. >> >> >> Thanks >> >> On Wed, Aug 31, 2011 at 8:50 AM, Renaud Barbier >> > wrote: >> >> Hello, >> I just loaded barebox on a beagle board and I am experimenting >> with it. >> >> I was wondering how I could load and execute a simple hello world >> program. >> >> It looks like I would have to use a module. >> >> Could somebody give me some pointers? >> >> Cheers, >> Renaud >> >> _______________________________________________ >> barebox mailing list >> barebox@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/barebox >> >> > > -- > Renaud Barbier > 14, Links Place > 3/2 great Michael House > Edinburgh, EH67EN > Tel: +44 131 561 3532