From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.x-arc.de ([217.6.246.34] helo=root.phytec.de) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TOooK-000107-Ui for barebox@lists.infradead.org; Thu, 18 Oct 2012 12:02:50 +0000 Message-ID: <507FEFE7.4000205@phytec.de> Date: Thu, 18 Oct 2012 14:02:47 +0200 From: Teresa Gamez MIME-Version: 1.0 References: <[PATCH 6/6] OMAP4: clean voltage switch> <1350337369-1027-1-git-send-email-vicencb@gmail.com> In-Reply-To: <1350337369-1027-1-git-send-email-vicencb@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 6/6] OMAP4: clean voltage switch To: Vicente Bergas Cc: barebox@lists.infradead.org Am 15.10.2012 23:42, schrieb Vicente Bergas: > > diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h > index 71ffe39..137cc88 100644 > --- a/arch/arm/mach-omap/include/mach/omap4-silicon.h > +++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h > @@ -196,6 +196,6 @@ struct dpll_param; > void omap4_ddr_init(const struct ddr_regs *, const struct dpll_param *); > void omap4_power_i2c_send(u32); > unsigned int omap4_revision(void); > -noinline int omap4_scale_vcores(unsigned vsel0_pin); > +noinline int omap4_scale_vcores(int vsel0_pin); > > #endif > diff --git a/arch/arm/mach-omap/omap4_clock.c b/arch/arm/mach-omap/omap4_clock.c > index 1481f16..f7927d2 100644 > --- a/arch/arm/mach-omap/omap4_clock.c > +++ b/arch/arm/mach-omap/omap4_clock.c > @@ -394,9 +394,38 @@ void omap4_enable_all_clocks(void) > sr32(CM_L3INIT_USBPHY_CLKCTRL, 0, 32, 0x301); > } > > -void omap4_do_scale_tps62361(u32 reg, u32 volt_mv) > +#define GPIO_MASK 0x1f > +#define GPIO_OE 0x34 > +#define GPIO_CLEARDATAOUT 0x90 > +#define GPIO_SETDATAOUT 0x94 > + > +static void __iomem *omap4_get_gpio_base(unsigned gpio) > +{ > + void __iomem *base; > + > + if (gpio < 32) > + base = (void *)0x4a310100; > + else > + base = (void *)(0x48053100 + ((gpio & ~GPIO_MASK) << 8)); > + > + return base; > +} > + > +void omap4_do_scale_tps62361(int vsel0_pin, u32 reg, u32 volt_mv) > { > u32 temp, step; > + void __iomem *base; > + u32 val; > + > + /* Pull the GPIO low to select SET0 register, while we program SET1 */ > + if (vsel0_pin >= 0) { > + base = omap4_get_gpio_base(vsel0_pin); > + val = 1 << (vsel0_pin & GPIO_MASK); > + writel(val, base + GPIO_CLEARDATAOUT); > + val = readl(base + GPIO_OE); > + val &= (1 << (vsel0_pin & GPIO_MASK)); Please note that the bit needs to be set to zero here to set it to output. So it was wrong in my patch. I have fixed it now. Please take a look in the ARM OMAP: Enable gpio output patch. Teresa > + writel(val, base + GPIO_OE); > + } > > step = volt_mv - TPS62361_BASE_VOLT_MV; > step /= 10; > @@ -411,4 +440,10 @@ void omap4_do_scale_tps62361(u32 reg, u32 volt_mv) > if (!wait_on_value(OMAP44XX_PRM_VC_VAL_BYPASS_VALID_BIT, 0, > OMAP44XX_PRM_VC_VAL_BYPASS, LDELAY)) > puts("Scaling voltage failed for vdd_mpu from TPS\n"); > + > + /* Pull the GPIO high to select SET1 register */ > + if (vsel0_pin >= 0) { > + val = 1 << (vsel0_pin & GPIO_MASK); > + writel(val, base + GPIO_SETDATAOUT); > + } > } > diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c > index 765fcb5..8e692ba 100644 > --- a/arch/arm/mach-omap/omap4_generic.c > +++ b/arch/arm/mach-omap/omap4_generic.c > @@ -495,27 +495,11 @@ enum omap_boot_src omap4_bootsrc(void) > return OMAP_BOOTSRC_UNKNOWN; > } > > -#define GPIO_MASK 0x1f > - > -static void __iomem *omap4_get_gpio_base(unsigned gpio) > -{ > - void __iomem *base; > - > - if (gpio < 32) > - base = (void *)0x4a310000; > - else > - base = (void *)(0x48053000 + ((gpio & ~GPIO_MASK) << 8)); > - > - return base; > -} > - > #define I2C_SLAVE 0x12 > > -noinline int omap4_scale_vcores(unsigned vsel0_pin) > +noinline int omap4_scale_vcores(int vsel0_pin) > { > - void __iomem *base; > unsigned int rev = omap4_revision(); > - u32 val = 0; > > /* For VC bypass only VCOREx_CGF_FORCE is necessary and > * VCOREx_CFG_VOLTAGE changes can be discarded > @@ -523,33 +507,6 @@ noinline int omap4_scale_vcores(unsigned vsel0_pin) > writel(0, OMAP44XX_PRM_VC_CFG_I2C_MODE); > writel(0x6026, OMAP44XX_PRM_VC_CFG_I2C_CLK); > > - /* TPS - supplies vdd_mpu on 4460 */ > - if (rev >= OMAP4460_ES1_0) { > - /* > - * Setup SET1 and SET0 with right values so that kernel > - * can use either of them based on its needs. > - */ > - omap4_do_scale_tps62361(TPS62361_REG_ADDR_SET0, 1430); > - omap4_do_scale_tps62361(TPS62361_REG_ADDR_SET1, 1430); > - > - /* > - * Select SET1 in TPS62361: > - * VSEL1 is grounded on board. So the following selects > - * VSEL1 = 0 and VSEL0 = 1 > - */ > - base = omap4_get_gpio_base(vsel0_pin); > - > - val = 1 << (vsel0_pin & GPIO_MASK); > - writel(val, base + 0x190); > - > - val = readl(base + 0x134); > - val &= (1 << (vsel0_pin & GPIO_MASK)); > - writel(val, base + 0x134); > - > - val = 1 << (vsel0_pin & GPIO_MASK); > - writel(val, base + 0x194); > - } > - > /* set VCORE1 force VSEL */ > /* > * 4430 : supplies vdd_mpu > @@ -568,8 +525,13 @@ noinline int omap4_scale_vcores(unsigned vsel0_pin) > /* 0x55: i2c addr, 28: ~ 1200 mvolts*/ > omap4_power_i2c_send((0x2855 << 8) | I2C_SLAVE); > > + /* TPS - supplies vdd_mpu on 4460 */ > + if (rev >= OMAP4460_ES1_0) > + omap4_do_scale_tps62361(vsel0_pin, > + TPS62361_REG_ADDR_SET1, 1203); > + > /* FIXME: set VCORE2 force VSEL, Check the reset value */ > - omap4_power_i2c_send((0x295B << 8) | I2C_SLAVE); > + omap4_power_i2c_send((0x285B << 8) | I2C_SLAVE); > > /* set VCORE3 force VSEL */ > switch (rev) { _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox