From: Christian Kapeller <christian.kapeller@cmotion.eu>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: TX53: Not Bootable from next tree
Date: Mon, 05 Nov 2012 14:27:26 +0100 [thread overview]
Message-ID: <5097BEBE.5040706@cmotion.eu> (raw)
In-Reply-To: <20121105125258.GV1641@pengutronix.de>
>> I've just flashed barebox from the next tree onto a TX53-8030 module,
>> and have to report, that the board won't boot.
>>
>> Currently I've tried to run it with MMU off and setting the text-base
>> to 0x71000000, with no positive results.
>>
>> I'll do further investigation, but meanwhile does anyone have barebox
>> running on a TX53 board?
>
> I just tested that it works for me as second stage. I can't test 1st
> stage atm as I currently have no physical access to the board.
Until now I've used bb in a 2nd stage configuration on top of the supplied
Redboot, and it worked without any problem.
Additionally I had CONFIG_MACH_DO_LOW_LEVEL_INIT disabled which skips
another pll setup step, that was already done by Redboot.
> Some guesses: Have you checked the correct the correct board revision in
> the config? It's the default, so I assume it's correct.
Yes, I did check for the correct board revision, and am using the
correct one: CONFIG_TX53_REV_XX30=y
> Are you using the barebox-flash-image link or barebox.bin? You have to
> use the former because it's a compressed image.
I've noticed, that the link target changes depending on build
configuration. So I've flashed the file pointed to by barebox-flash-image.
> You might want to disable compressed image support in
> General settings ->
> memory layout ->
> [ ] pre-bootoloader image
Just tried that, but without changed result.
Currently I am trying to get my PEEDI JTAG probe working with the
board, but until then I stay in the dark.
Cheers,
Christian
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-11-05 13:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-05 11:08 Christian Kapeller
2012-11-05 12:52 ` Sascha Hauer
2012-11-05 13:27 ` Christian Kapeller [this message]
2012-11-06 13:49 Peter Wippich
2012-11-07 8:04 ` Sascha Hauer
2012-11-12 8:33 ` Sascha Hauer
2012-11-12 11:22 ` Peter Wippich
2012-11-12 13:02 ` Christian Kapeller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5097BEBE.5040706@cmotion.eu \
--to=christian.kapeller@cmotion.eu \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox