mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/3 for next] AM33xx: Cleanup of lowlevel code
@ 2013-08-23  7:00 Teresa Gámez
  2013-08-23  7:00 ` [PATCH 2/3 for next] PCM051: Clean up " Teresa Gámez
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Teresa Gámez @ 2013-08-23  7:00 UTC (permalink / raw)
  To: barebox

There is a lot of duplicate lowlevel code between the
am33xx boards. Move this code to am33xx_generic and
create structs for sdram settings.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
---
 arch/arm/mach-omap/am33xx_generic.c              |  166 ++++++++++++++++++++++
 arch/arm/mach-omap/include/mach/am33xx-silicon.h |   45 ++++++
 2 files changed, 211 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap/am33xx_generic.c b/arch/arm/mach-omap/am33xx_generic.c
index a653ef7..1b43749 100644
--- a/arch/arm/mach-omap/am33xx_generic.c
+++ b/arch/arm/mach-omap/am33xx_generic.c
@@ -171,3 +171,169 @@ static int am33xx_gpio_init(void)
 	return 0;
 }
 coredevice_initcall(am33xx_gpio_init);
+
+/* UART Defines */
+#define UART_SYSCFG_OFFSET	0x54
+#define UART_SYSSTS_OFFSET	0x58
+
+#define UART_CLK_RUNNING_MASK	0x1
+#define UART_RESET		(0x1 << 1)
+#define UART_SMART_IDLE_EN	(0x1 << 0x3)
+
+void am33xx_uart0_soft_reset(void)
+{
+	int reg;
+
+	reg  = readl(AM33XX_UART0_BASE + UART_SYSCFG_OFFSET);
+	reg |= UART_RESET;
+	writel(reg, (AM33XX_UART0_BASE + UART_SYSCFG_OFFSET));
+	while ((readl(AM33XX_UART0_BASE + UART_SYSSTS_OFFSET) &
+		UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+		;
+
+	/* Disable smart idle */
+	reg = readl((AM33XX_UART0_BASE + UART_SYSCFG_OFFSET));
+	reg |= UART_SMART_IDLE_EN;
+	writel(reg, (AM33XX_UART0_BASE + UART_SYSCFG_OFFSET))
+		;
+}
+
+
+#define VTP_CTRL_READY		(0x1 << 5)
+#define VTP_CTRL_ENABLE		(0x1 << 6)
+#define VTP_CTRL_START_EN	(0x1)
+
+void am33xx_config_vtp(void)
+{
+	writel(readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_ENABLE,
+			AM33XX_VTP0_CTRL_REG);
+	writel(readl(AM33XX_VTP0_CTRL_REG) & (~VTP_CTRL_START_EN),
+			AM33XX_VTP0_CTRL_REG);
+	writel(readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_START_EN,
+			AM33XX_VTP0_CTRL_REG);
+
+	/* Poll for READY */
+	while ((readl(AM33XX_VTP0_CTRL_REG) &
+				VTP_CTRL_READY) != VTP_CTRL_READY)
+		;
+}
+
+void am33xx_ddr_phydata_cmd_macro(const struct am33xx_cmd_control *cmd_ctrl)
+{
+	writel(cmd_ctrl->slave_ratio0, AM33XX_CMD0_CTRL_SLAVE_RATIO_0);
+	writel(cmd_ctrl->dll_lock_diff0, AM33XX_CMD0_DLL_LOCK_DIFF_0);
+	writel(cmd_ctrl->invert_clkout0, AM33XX_CMD0_INVERT_CLKOUT_0);
+
+	writel(cmd_ctrl->slave_ratio1, AM33XX_CMD1_CTRL_SLAVE_RATIO_0);
+	writel(cmd_ctrl->dll_lock_diff1, AM33XX_CMD1_DLL_LOCK_DIFF_0);
+	writel(cmd_ctrl->invert_clkout1, AM33XX_CMD1_INVERT_CLKOUT_0);
+
+	writel(cmd_ctrl->slave_ratio2, AM33XX_CMD2_CTRL_SLAVE_RATIO_0);
+	writel(cmd_ctrl->dll_lock_diff2, AM33XX_CMD2_DLL_LOCK_DIFF_0);
+	writel(cmd_ctrl->invert_clkout2, AM33XX_CMD2_INVERT_CLKOUT_0);
+}
+
+#define CM_EMIF_SDRAM_CONFIG	(AM33XX_CTRL_BASE + 0x110)
+
+void am33xx_config_sdram(const struct am33xx_emif_regs *regs)
+{
+	writel(regs->emif_read_latency, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1));
+	writel(regs->emif_read_latency,
+		AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1_SHADOW));
+	writel(regs->emif_read_latency, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_2));
+	writel(regs->emif_tim1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1));
+	writel(regs->emif_tim1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1_SHADOW));
+	writel(regs->emif_tim2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2));
+	writel(regs->emif_tim2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2_SHADOW));
+	writel(regs->emif_tim3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3));
+	writel(regs->emif_tim3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3_SHADOW));
+
+	if (regs->zq_config) {
+		/*
+		 * A value of 0x2800 for the REF CTRL will give us
+		 * about 570us for a delay, which will be long enough
+		 * to configure things.
+		 */
+		writel(0x2800, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+		writel(regs->zq_config, AM33XX_EMIF4_0_REG(ZQ_CONFIG));
+		writel(regs->sdram_config, CM_EMIF_SDRAM_CONFIG);
+		writel(regs->sdram_config, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
+		writel(regs->sdram_ref_ctrl,
+				AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+		writel(regs->sdram_ref_ctrl,
+			AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
+
+	}
+
+	writel(regs->sdram_ref_ctrl,
+			AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+	writel(regs->sdram_ref_ctrl,
+			AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
+	writel(regs->sdram_config, CM_EMIF_SDRAM_CONFIG);
+}
+
+void am33xx_config_io_ctrl(int ioctrl)
+{
+	writel(ioctrl, AM33XX_DDR_CMD0_IOCTRL);
+	writel(ioctrl, AM33XX_DDR_CMD1_IOCTRL);
+	writel(ioctrl, AM33XX_DDR_CMD2_IOCTRL);
+	writel(ioctrl, AM33XX_DDR_DATA0_IOCTRL);
+	writel(ioctrl, AM33XX_DDR_DATA1_IOCTRL);
+}
+
+void am33xx_config_ddr_data(const struct am33xx_ddr_data *data, int macronr)
+{
+	u32 base = 0x0;
+
+	if (macronr)
+		base = 0xA4;
+
+	writel(data->rd_slave_ratio0,
+				(AM33XX_DATA0_RD_DQS_SLAVE_RATIO_0 + base));
+	writel(data->wr_dqs_slave_ratio0,
+				(AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0 + base));
+	writel(data->wrlvl_init_ratio0,
+				(AM33XX_DATA0_WRLVL_INIT_RATIO_0 + base));
+	writel(data->gatelvl_init_ratio0,
+				(AM33XX_DATA0_GATELVL_INIT_RATIO_0 + base));
+	writel(data->fifo_we_slave_ratio0,
+				(AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0 + base));
+	writel(data->wr_slave_ratio0,
+				(AM33XX_DATA0_WR_DATA_SLAVE_RATIO_0 + base));
+	writel(data->use_rank0_delay,
+				(AM33XX_DATA0_RANK0_DELAYS_0 + base));
+	writel(data->dll_lock_diff0,
+				(AM33XX_DATA0_DLL_LOCK_DIFF_0 + base));
+}
+
+void am335x_sdram_init(int mpupll_M, int osc, int ioctrl,
+			const struct am33xx_cmd_control *cmd_ctrl,
+			const struct am33xx_emif_regs *emif_regs,
+			const struct am33xx_ddr_data *ddr_data)
+{
+	/* Dont reconfigure SDRAM while running in SDRAM! */
+	if (running_in_sdram())
+		return;
+
+	/* Setup the PLLs and the clocks for the peripherals */
+	pll_init(mpupll_M, osc);
+
+	enable_ddr_clocks();
+
+	am33xx_config_vtp();
+
+	am33xx_ddr_phydata_cmd_macro(cmd_ctrl);
+	am33xx_config_ddr_data(ddr_data, 0);
+	am33xx_config_ddr_data(ddr_data, 1);
+
+	am33xx_config_io_ctrl(ioctrl);
+
+	writel(readl(AM33XX_DDR_IO_CTRL) &
+				0xefffffff, AM33XX_DDR_IO_CTRL);
+	writel(readl(AM33XX_DDR_CKE_CTRL) |
+				0x00000001, AM33XX_DDR_CKE_CTRL);
+
+	am33xx_config_sdram(emif_regs);
+
+	am33xx_uart0_soft_reset();
+}
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index bd55da4..c6d7178 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -191,4 +191,49 @@
 #define AM33XX_MAC_ID1_HI	(AM33XX_CTRL_BASE + 0x63c)
 #define AM33XX_MAC_MII_SEL	(AM33XX_CTRL_BASE + 0x650)
 
+struct am33xx_cmd_control {
+	u32 slave_ratio0;
+	u32 dll_lock_diff0;
+	u32 invert_clkout0;
+	u32 slave_ratio1;
+	u32 dll_lock_diff1;
+	u32 invert_clkout1;
+	u32 slave_ratio2;
+	u32 dll_lock_diff2;
+	u32 invert_clkout2;
+};
+
+struct am33xx_emif_regs {
+	u32 emif_read_latency;
+	u32 emif_tim1;
+	u32 emif_tim2;
+	u32 emif_tim3;
+	u32 sdram_config;
+	u32 sdram_config2;
+	u32 zq_config;
+	u32 sdram_ref_ctrl;
+};
+
+struct am33xx_ddr_data {
+	u32 rd_slave_ratio0;
+	u32 wr_dqs_slave_ratio0;
+	u32 wrlvl_init_ratio0;
+	u32 gatelvl_init_ratio0;
+	u32 fifo_we_slave_ratio0;
+	u32 wr_slave_ratio0;
+	u32 use_rank0_delay;
+	u32 dll_lock_diff0;
+};
+
+void am33xx_uart0_soft_reset(void);
+void am33xx_config_vtp(void);
+void am33xx_ddr_phydata_cmd_macro(const struct am33xx_cmd_control *cmd_ctrl);
+void am33xx_config_io_ctrl(int ioctrl);
+void am33xx_config_sdram(const struct am33xx_emif_regs *regs);
+void am33xx_config_ddr_data(const struct am33xx_ddr_data *data, int macronr);
+void am335x_sdram_init(int mpupll_M, int osc, int ioctrl,
+			const struct am33xx_cmd_control *cmd_ctrl,
+			const struct am33xx_emif_regs *emif_regs,
+			const struct am33xx_ddr_data *ddr_data);
+
 #endif
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2013-09-02  8:22 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-23  7:00 [PATCH 1/3 for next] AM33xx: Cleanup of lowlevel code Teresa Gámez
2013-08-23  7:00 ` [PATCH 2/3 for next] PCM051: Clean up " Teresa Gámez
2013-08-23  7:00 ` [PATCH 3/3 for next] beaglebone: " Teresa Gámez
2013-08-26  6:49 ` [PATCH 1/3 for next] AM33xx: Cleanup of " Sascha Hauer
2013-08-26 12:19   ` Teresa Gamez
2013-09-02  8:23 ` Jan Lübbe

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox