From: raespi <raespi@icid.cu>
To: barebox@lists.infradead.org
Subject: problem booting with Micron MT29F8G08ABABAWP ...
Date: Thu, 13 Mar 2014 15:32:23 -0400 [thread overview]
Message-ID: <532207C7.9020206@icid.cu> (raw)
Hi ... I'm using barebox 2014.02.0 to boot with a clone of the mini2440
board using the MT29F8G08ABABAWP NAND.
I'm getting the following error:
barebox 2014.02.0 #1 Thu Mar 13 15:28:57 CDT 2014
Board: <NULL>
nand: ONFI param page 0 valid
nand: ONFI flash detected
nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron
MT29F8G08ABABAWP), 1024
nand: No oob scheme defined for oobsize 224
BUG: failure at drivers/mtd/nand/nand_base.c:3357/nand_scan_tail()!
BUG!
no stack data available
DIVN_UPLL0
MPLLVal [M:61h,P:1h,S:2h]
CLKDIVN:7h
After this poing the board gets resetted back to the original point. I
can never get to the barebox prompt.
Any ideas on how to fix this ??
Thanks in advance ...
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-03-13 19:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-13 19:32 raespi [this message]
2014-03-13 20:28 ` Eric Bénard
2014-03-14 18:45 ` raespi
2014-03-14 20:18 ` Eric Bénard
2014-03-14 20:30 ` raespi
2014-03-17 6:39 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=532207C7.9020206@icid.cu \
--to=raespi@icid.cu \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox