From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.icid.cu ([200.55.133.90]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WOBLX-0004Uh-HT for barebox@lists.infradead.org; Thu, 13 Mar 2014 19:31:15 +0000 Received: from icid.cu ([10.10.0.3]) by mail.icid.cu (8.13.8/8.13.8) with ESMTP id s2DJBQMi028908 for ; Thu, 13 Mar 2014 15:11:26 -0400 Received: from [10.10.8.78] by icid.cu (Cipher TLSv1:RC4-MD5:128) (MDaemon PRO v9.6.1) with ESMTP id md50007095224.msg for ; Thu, 13 Mar 2014 13:45:37 -0500 Message-ID: <532207C7.9020206@icid.cu> Date: Thu, 13 Mar 2014 15:32:23 -0400 From: raespi MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: problem booting with Micron MT29F8G08ABABAWP ... To: barebox@lists.infradead.org Hi ... I'm using barebox 2014.02.0 to boot with a clone of the mini2440 board using the MT29F8G08ABABAWP NAND. I'm getting the following error: barebox 2014.02.0 #1 Thu Mar 13 15:28:57 CDT 2014 Board: nand: ONFI param page 0 valid nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron MT29F8G08ABABAWP), 1024 nand: No oob scheme defined for oobsize 224 BUG: failure at drivers/mtd/nand/nand_base.c:3357/nand_scan_tail()! BUG! no stack data available DIVN_UPLL0 MPLLVal [M:61h,P:1h,S:2h] CLKDIVN:7h After this poing the board gets resetted back to the original point. I can never get to the barebox prompt. Any ideas on how to fix this ?? Thanks in advance ... _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox