mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Frede Florian <florian.frede@ma-info.de>
To: barebox@lists.infradead.org
Subject: Re: Problems with pyhBoard-Wega-AM335x
Date: Mon, 07 Jul 2014 10:04:58 +0200	[thread overview]
Message-ID: <53BA54AA.3000502@ma-info.de> (raw)
In-Reply-To: <53BA5442.6020708@ma-info.de>

[-- Attachment #1: Type: text/plain, Size: 1513 bytes --]

Hello Rolf,

I used this Option already, but to be sure that there is no mistake I 
reconfigured the Barebox and Barebox_MLO again and use the new Version 
2014.07.0. The result is the same.

       LD images/start_am33xx_phytec_phycore_sram.pbl
    arch/arm/boards/built-in-pbl.o: In function `pcm051_board_init':
    :(.text.pcm051_board_init+0x94): undefined reference to
    `__dtb_am335x_phytec_phycore_start'
    make[2]: *** [images/start_am33xx_phytec_phycore_sram.pbl] Error 1
    make[2]: *** Waiting for unfinished jobs....
    make[1]: Leaving directory
    `/phytec/phyBOARD-WEGA-AM335x-PD13.0.0/platform-phyBOARD-WEGA-AM335x/build-target/barebox_mlo-2014.07.0'
    make[1]: *** [images] Error 2
    make: ***
    [/phytec/phyBOARD-WEGA-AM335x-PD13.0.0/platform-phyBOARD-WEGA-AM335x/state/barebox_mlo.compile]
    Error 2

I also attached the config files may be there is an other error?

Regards

Florian



Am 04.07.2014 15:26, schrieb Rolf Evers-Fischer:
> Hi Florian,
>
> [...]
>
> I've had the same problem after updating my beaglebone project to a newer
> barebox version.
>
> Could you please check your barebox configuration?
> The new config item "Allow multiple boards to be selected" in "System
> Type"->"OMAP Features" needs to be selected. After that you should be able to select the "Phytec
> phyCORE pcm051" board.
>
> A rebuild will create a file called "am335x-phytec-phycore-dtb.S" in the
> folder arch/arm/dts. This file contains the missing symbols.
>
> Best regards,
>   Rolf
>


[-- Attachment #2: barebox.config --]
[-- Type: text/plain, Size: 11645 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Barebox/arm 2014.07.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y

#
# System Type
#
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_S5PCxx is not set
# CONFIG_ARCH_S3C64xx is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y

#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff

#
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0=y
CONFIG_OMAP_GPMC=y
# CONFIG_OMAP_BUILD_IFT is not set
# CONFIG_OMAP_BUILD_SPI is not set
# CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO is not set
# CONFIG_BAREBOX_UPDATE_AM33XX_NAND_XLOADSLOTS is not set
CONFIG_OMAP_MULTI_BOARDS=y
# CONFIG_MACH_BEAGLEBONE is not set
CONFIG_MACH_PCM051=y
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
CONFIG_ARM_BOARD_APPEND_ATAG=y

#
# ARM specific settings
#
# CONFIG_CPU_V7_DCACHE_SKIP is not set
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_EXCEPTIONS=y
CONFIG_ARM_UNWIND=y
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_ENV_HANDLING=y
CONFIG_GENERIC_GPIO=y
CONFIG_BOOTM=y
CONFIG_BLOCK=y
CONFIG_BLOCK_WRITE=y
CONFIG_FILETYPE=y
CONFIG_BINFMT=y
CONFIG_UIMAGE=y
CONFIG_GLOBALVAR=y
CONFIG_STDDEV=y
CONFIG_BAREBOX_UPDATE=y

#
# General Settings
#
CONFIG_LOCALVERSION="LC"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
CONFIG_MEMINFO=y
CONFIG_ENVIRONMENT_VARIABLES=y

#
# memory layout
#
CONFIG_HAVE_PBL_IMAGE=y
CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_GZIP is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
CONFIG_MMU_EARLY=y
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_TEXT_BASE=0x8f000000
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x4000000
# CONFIG_BROKEN is not set
# CONFIG_EXPERIMENTAL is not set
CONFIG_MALLOC_DLMALLOC=y
# CONFIG_MALLOC_TLSF is not set
# CONFIG_KALLSYMS is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_PANIC_HANG is not set
CONFIG_PROMPT="barebox@pcm051>"
CONFIG_BAUDRATE=115200
CONFIG_CBSIZE=1024
CONFIG_SHELL_HUSH=y
# CONFIG_SHELL_SIMPLE is not set
# CONFIG_SHELL_NONE is not set
CONFIG_GLOB=y
CONFIG_GLOB_SORT=y
CONFIG_PROMPT_HUSH_PS2="> "
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
# CONFIG_PASSWORD is not set
CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
# CONFIG_TIMESTAMP is not set
# CONFIG_BLSPEC is not set
# CONFIG_KERNEL_INSTALL_TARGET is not set
CONFIG_CONSOLE_FULL=y
# CONFIG_CONSOLE_SIMPLE is not set
# CONFIG_CONSOLE_NONE is not set
CONFIG_CONSOLE_ACTIVATE_FIRST=y
# CONFIG_CONSOLE_ACTIVATE_ALL is not set
# CONFIG_CONSOLE_ACTIVATE_NONE is not set
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
CONFIG_DEFAULT_ENVIRONMENT=y
# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
# CONFIG_DEFAULT_COMPRESSION_LZO is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_HAVE_DEFAULT_ENVIRONMENT_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pcm051/env"
# CONFIG_BAREBOXENV_TARGET is not set
# CONFIG_BAREBOXCRC32_TARGET is not set
# CONFIG_POLLER is not set
# CONFIG_RESET_SOURCE is not set

#
# Debugging
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
# CONFIG_HAS_POWEROFF is not set
CONFIG_COMPILE_DIGEST=y
CONFIG_COMPILE_MEMORY=y

#
# Commands
#

#
# Information
#
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_CMD_DEVINFO=y
CONFIG_CMD_DRVINFO=y
CONFIG_CMD_HELP=y
CONFIG_LONGHELP=y
# CONFIG_CMD_IOMEM is not set
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_ARM_MMUINFO=y
CONFIG_CMD_VERSION=y

#
# Boot
#
CONFIG_FLEXIBLE_BOOTARGS=y
CONFIG_CMD_BOOT=y
CONFIG_CMD_BOOTM=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
# CONFIG_CMD_BOOTM_VERBOSE is not set
# CONFIG_CMD_BOOTM_INITRD is not set
# CONFIG_CMD_BOOTM_OFTREE is not set
# CONFIG_CMD_BOOTM_AIMAGE is not set
CONFIG_CMD_BOOTU=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GO=y
CONFIG_CMD_LOADB=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_LOADY is not set
CONFIG_CMD_RESET=y
CONFIG_CMD_UIMAGE=y

#
# Partition
#
CONFIG_CMD_PARTITION=y
CONFIG_CMD_AUTOMOUNT=y
CONFIG_CMD_MOUNT=y
CONFIG_CMD_UBI=y
CONFIG_CMD_UBIFORMAT=y
CONFIG_CMD_UMOUNT=y

#
# Environment
#
CONFIG_CMD_EXPORT=y
CONFIG_CMD_GLOBAL=y
CONFIG_CMD_LOADENV=y
CONFIG_CMD_PRINTENV=y
# CONFIG_CMD_MAGICVAR is not set
CONFIG_CMD_SAVEENV=y

#
# File
#
CONFIG_CMD_BASENAME=y
CONFIG_CMD_CAT=y
CONFIG_CMD_CD=y
CONFIG_CMD_CP=y
CONFIG_CMD_DIRNAME=y
# CONFIG_CMD_FILETYPE is not set
# CONFIG_CMD_LN is not set
CONFIG_CMD_LS=y
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MKDIR=y
CONFIG_CMD_PWD=y
CONFIG_CMD_READLINK=y
CONFIG_CMD_RM=y
CONFIG_CMD_RMDIR=y
# CONFIG_CMD_SHA1SUM is not set
# CONFIG_CMD_SHA224SUM is not set
# CONFIG_CMD_SHA256SUM is not set
CONFIG_CMD_UNCOMPRESS=y

#
# Shell scripting
#
CONFIG_CMD_FALSE=y
CONFIG_CMD_GETOPT=y
# CONFIG_CMD_LET is not set
# CONFIG_CMD_MSLEEP is not set
# CONFIG_CMD_READF is not set
CONFIG_CMD_SLEEP=y
CONFIG_CMD_TEST=y
CONFIG_CMD_TRUE=y

#
# Network
#
# CONFIG_CMD_DHCP is not set
# CONFIG_CMD_HOST is not set
CONFIG_NET_CMD_IFUP=y
CONFIG_CMD_MIITOOL=y
# CONFIG_CMD_PING is not set
CONFIG_CMD_TFTP=y

#
# Console and Framebuffer interaction
#
CONFIG_CMD_CLEAR=y
CONFIG_CMD_ECHO=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
# CONFIG_CMD_LOGIN is not set
CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
# CONFIG_CMD_MENUTREE is not set
# CONFIG_CMD_PASSWD is not set
# CONFIG_CMD_SPLASH is not set
CONFIG_CMD_READLINE=y
CONFIG_CMD_TIMEOUT=y

#
# Memory
#
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
CONFIG_CMD_MD=y
CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_MM is not set
CONFIG_CMD_MW=y

#
# Hardware manipulation
#
# CONFIG_CMD_DETECT is not set
CONFIG_CMD_FLASH=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NANDTEST=y
CONFIG_CMD_USB=y

#
# Miscelleanous
#
# CONFIG_CMD_2048 is not set
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_OF_DUMP is not set
# CONFIG_CMD_OF_NODE is not set
# CONFIG_CMD_OF_PROPERTY is not set
# CONFIG_CMD_OFTREE is not set
CONFIG_CMD_TIME=y
CONFIG_NET=y
CONFIG_NET_NFS=y
# CONFIG_NET_NETCONSOLE is not set
# CONFIG_NET_RESOLV is not set
CONFIG_NET_IFUP=y

#
# Drivers
#
# CONFIG_OFDEVICE is not set
CONFIG_OF_NET=y

#
# serial drivers
#
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set
CONFIG_PHYLIB=y

#
# Network drivers
#
# CONFIG_DRIVER_NET_ARC_EMAC is not set
# CONFIG_DRIVER_NET_CALXEDA_XGMAC is not set
CONFIG_DRIVER_NET_CPSW=y
# CONFIG_DRIVER_NET_DESIGNWARE is not set
# CONFIG_DRIVER_NET_ETHOC is not set
# CONFIG_DRIVER_NET_KS8851_MLL is not set
# CONFIG_DRIVER_NET_SMC911X is not set
# CONFIG_DRIVER_NET_SMC91111 is not set

#
# phylib
#

#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_NATIONAL_PHY is not set
CONFIG_SMSC_PHY=y

#
# MII bus device drivers
#
# CONFIG_NET_USB is not set

#
# SPI drivers
#
# CONFIG_SPI is not set
CONFIG_I2C=y

#
# I2C Hardware Bus support
#
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OMAP=y
CONFIG_MTD=y
CONFIG_MTD_WRITE=y
CONFIG_MTD_OOB_DEVICE=y
# CONFIG_MTD_RAW_DEVICE is not set

#
# Self contained MTD devices
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
CONFIG_NAND_ECC_SOFT=y
# CONFIG_NAND_ECC_BCH is not set
CONFIG_NAND_ECC_HW=y
# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
CONFIG_NAND_ECC_HW_NONE=y
CONFIG_NAND_INFO=y
CONFIG_NAND_READ_OOB=y
CONFIG_NAND_BBT=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_DISK=y
CONFIG_DISK_WRITE=y

#
# drive types
#
# CONFIG_DISK_ATA is not set
# CONFIG_DISK_AHCI is not set

#
# interface types
#
# CONFIG_DISK_INTF_PLATFORM_IDE is not set
CONFIG_USB=y
# CONFIG_USB_EHCI is not set
# CONFIG_USB_ULPI is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_VIDEO is not set
CONFIG_MCI=y

#
# --- Feature list ---
#
CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set

#
# --- MCI host drivers ---
#
# CONFIG_MCI_DW is not set
CONFIG_MCI_OMAP_HSMMC=y
# CONFIG_CLOCKSOURCE_DUMMY is not set

#
# MFD
#
# CONFIG_MFD_ACT8846 is not set
# CONFIG_MFD_LP3972 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_MFD_MC34704 is not set
# CONFIG_MFD_MC9SDZ60 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set

#
# Misc devices
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
# CONFIG_LED is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y

#
# Input device support
#
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_WATCHDOG is not set
# CONFIG_PWM is not set

#
# DMA support
#
CONFIG_GPIOLIB=y

#
# GPIO
#
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IMX is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
# CONFIG_PINCTRL_SINGLE is not set

#
# Bus devices
#
# CONFIG_RESET_CONTROLLER is not set

#
# Filesystem support
#
CONFIG_FS=y
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
CONFIG_FS_TFTP=y
CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
# CONFIG_FS_UBIFS is not set
# CONFIG_FS_BPKFS is not set
# CONFIG_FS_UIMAGEFS is not set

#
# Library routines
#
CONFIG_PARAMETER=y
CONFIG_UNCOMPRESS=y
CONFIG_ZLIB=y
# CONFIG_BZLIB is not set
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_QSORT=y
CONFIG_LIBSCAN=y
CONFIG_LIBUBIGEN=y
CONFIG_LIBMTD=y

#
# Library gui routines
#
CONFIG_CRC32=y
CONFIG_CRC16=y
CONFIG_DIGEST=y
CONFIG_MD5=y
# CONFIG_SHA1 is not set
# CONFIG_SHA224 is not set
# CONFIG_SHA256 is not set


[-- Attachment #3: barebox_mlo.config --]
[-- Type: text/plain, Size: 6594 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Barebox/arm 2014.07.0 Configuration
#
CONFIG_ARM=y

#
# System Type
#
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_S5PCxx is not set
# CONFIG_ARCH_S3C64xx is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y

#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff

#
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0=y
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_BUILD_IFT=y
# CONFIG_OMAP_BUILD_SPI is not set
CONFIG_OMAP_MULTI_BOARDS=y
# CONFIG_MACH_BEAGLEBONE is not set
CONFIG_MACH_PCM051=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y

#
# ARM specific settings
#
# CONFIG_CPU_V7_DCACHE_SKIP is not set
# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
CONFIG_ARM_EXCEPTIONS=y
# CONFIG_ARM_UNWIND is not set
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_GENERIC_GPIO=y
CONFIG_BLOCK=y
CONFIG_BLOCK_WRITE=y
CONFIG_FILETYPE=y

#
# General Settings
#
CONFIG_LOCALVERSION="-PD13.0.0 phyBOARD-WEGA MLO"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
# CONFIG_MEMINFO is not set
CONFIG_ENVIRONMENT_VARIABLES=y

#
# memory layout
#
CONFIG_HAVE_PBL_IMAGE=y
CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_GZIP is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
CONFIG_MMU_EARLY=y
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_TEXT_BASE=0x402F0400
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x1600
CONFIG_MALLOC_SIZE=0x1000000
# CONFIG_BROKEN is not set
# CONFIG_EXPERIMENTAL is not set
CONFIG_MALLOC_DLMALLOC=y
# CONFIG_MALLOC_TLSF is not set
# CONFIG_MALLOC_DUMMY is not set
# CONFIG_KALLSYMS is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_PANIC_HANG is not set
CONFIG_PROMPT="MLO>"
CONFIG_BAUDRATE=115200
CONFIG_SIMPLE_READLINE=y
CONFIG_CBSIZE=1024
# CONFIG_SHELL_HUSH is not set
# CONFIG_SHELL_SIMPLE is not set
CONFIG_SHELL_NONE=y
# CONFIG_GLOB is not set
# CONFIG_MENU is not set
# CONFIG_PASSWORD is not set
# CONFIG_ERRNO_MESSAGES is not set
# CONFIG_TIMESTAMP is not set
# CONFIG_BLSPEC is not set
# CONFIG_KERNEL_INSTALL_TARGET is not set
# CONFIG_CONSOLE_FULL is not set
CONFIG_CONSOLE_SIMPLE=y
# CONFIG_CONSOLE_NONE is not set
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
# CONFIG_DEFAULT_ENVIRONMENT is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_HAVE_DEFAULT_ENVIRONMENT_NEW=y
# CONFIG_BAREBOXENV_TARGET is not set
# CONFIG_BAREBOXCRC32_TARGET is not set
# CONFIG_POLLER is not set

#
# Debugging
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
CONFIG_HAS_DEBUG_LL=y
# CONFIG_HAS_POWEROFF is not set
# CONFIG_NET is not set

#
# Drivers
#
# CONFIG_OFDEVICE is not set

#
# serial drivers
#
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set

#
# SPI drivers
#
# CONFIG_SPI is not set
# CONFIG_I2C is not set
CONFIG_MTD=y
CONFIG_MTD_WRITE=y
CONFIG_MTD_OOB_DEVICE=y
# CONFIG_MTD_RAW_DEVICE is not set

#
# Self contained MTD devices
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
CONFIG_NAND_ECC_SOFT=y
# CONFIG_NAND_ECC_BCH is not set
CONFIG_NAND_ECC_HW=y
# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
# CONFIG_NAND_ECC_HW_NONE is not set
CONFIG_NAND_INFO=y
CONFIG_NAND_READ_OOB=y
CONFIG_NAND_BBT=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_UBI is not set
CONFIG_DISK=y
CONFIG_DISK_WRITE=y

#
# drive types
#
# CONFIG_DISK_ATA is not set
# CONFIG_DISK_AHCI is not set

#
# interface types
#
# CONFIG_DISK_INTF_PLATFORM_IDE is not set
# CONFIG_USB is not set
# CONFIG_VIDEO is not set
CONFIG_MCI=y

#
# --- Feature list ---
#
CONFIG_MCI_STARTUP=y
# CONFIG_MCI_WRITE is not set
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set

#
# --- MCI host drivers ---
#
# CONFIG_MCI_DW is not set
CONFIG_MCI_OMAP_HSMMC=y
# CONFIG_CLOCKSOURCE_DUMMY is not set

#
# MFD
#
# CONFIG_MFD_SYSCON is not set

#
# Misc devices
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
# CONFIG_LED is not set

#
# EEPROM support
#

#
# Input device support
#
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_WATCHDOG is not set
# CONFIG_PWM is not set

#
# DMA support
#
CONFIG_GPIOLIB=y

#
# GPIO
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IMX is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
# CONFIG_PINCTRL_SINGLE is not set

#
# Bus devices
#
# CONFIG_RESET_CONTROLLER is not set

#
# Filesystem support
#
CONFIG_FS=y
# CONFIG_FS_CRAMFS is not set
# CONFIG_FS_EXT4 is not set
# CONFIG_FS_RAMFS is not set
# CONFIG_FS_DEVFS is not set
CONFIG_FS_FAT=y
# CONFIG_FS_FAT_WRITE is not set
CONFIG_FS_FAT_LFN=y
# CONFIG_FS_BPKFS is not set
# CONFIG_FS_UIMAGEFS is not set

#
# Library routines
#
# CONFIG_ZLIB is not set
# CONFIG_BZLIB is not set
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_PROCESS_ESCAPE_SEQUENCE is not set
# CONFIG_LZO_DECOMPRESS is not set

#
# Library gui routines
#
# CONFIG_BOOTSTRAP is not set
# CONFIG_DIGEST is not set


[-- Attachment #4: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-07-07  8:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-04 13:26 Rolf Evers-Fischer
     [not found] ` <53BA5442.6020708@ma-info.de>
2014-07-07  8:04   ` Frede Florian [this message]
2014-07-07 10:05   ` Rolf Evers-Fischer
2014-07-07 11:14     ` Frede Florian
2014-07-07 12:00       ` Sascha Hauer
2014-07-07 12:04         ` Robert P. J. Day
2014-07-07 12:16           ` Sascha Hauer
2014-07-07 12:29         ` Rolf Evers-Fischer
2014-07-08  9:29           ` Frede Florian
2014-07-08 10:01             ` Teresa Gamez
2014-07-09  6:47               ` Rolf Evers-Fischer
2014-07-09 12:32                 ` Frede Florian
2014-07-21  9:34                   ` Frede Florian
2014-07-22  7:20                     ` Holger Schurig
  -- strict thread matches above, loose matches on Subject: below --
2014-07-04 10:12 Frede Florian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53BA54AA.3000502@ma-info.de \
    --to=florian.frede@ma-info.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox