mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Bo Shen <voice.shen@atmel.com>
To: Doug Brainard <dbrainard@brainardinsight.com>,
	barebox@lists.infradead.org
Subject: Re: [PATCH] SAMA5D4EK - Now uses the new environment.
Date: Fri, 13 Feb 2015 13:52:48 +0800	[thread overview]
Message-ID: <54DD9130.40606@atmel.com> (raw)
In-Reply-To: <1423805265-19766-1-git-send-email-dbrainard@brainardinsight.com>

Hi Doug,

On 02/13/2015 01:27 PM, Doug Brainard wrote:
> Switched SAMA5D4EK development board to the newer environment method.
>
> Improved interface to the new environment
>
> Create a custom mtdparts-add script to have the partition naming work the same as in the old environment
>
> Removed custom mtdparts-add after new patch resolved the issue being seen.

I think the upper three line should be under "---", while not in commit 
message. This is what you do between previous version and this version 
(So you need add version to the patch).

> Signed-off-by: Doug Brainard <dbrainard@brainardinsight.com>
> ---

(Put the depends here)
For example:
   This patch based on "mtd partition handling updates" patch series 
from Sascha Hauer <s.hauer@pengutronix.de>

(Put change log here)

For example:
Changes in v2:
   - Removed custom mtdparts-add after new patch resolved the issue 
being seen.


>   arch/arm/boards/sama5d4ek/env/bin/init_board       | 15 --------
>   arch/arm/boards/sama5d4ek/env/boot/nand            |  6 ++++
>   arch/arm/boards/sama5d4ek/env/config               | 42 ----------------------
>   arch/arm/boards/sama5d4ek/env/init/mtdparts-nand   |  6 ++++
>   arch/arm/boards/sama5d4ek/env/init/mtdparts-nor    |  6 ++++
>   arch/arm/boards/sama5d4ek/env/init/ps1             |  7 ++++
>   arch/arm/boards/sama5d4ek/env/init/splash          | 10 ++++++
>   arch/arm/boards/sama5d4ek/env/nv/boot.default      |  1 +
>   arch/arm/boards/sama5d4ek/env/nv/hostname          |  1 +
>   .../boards/sama5d4ek/env/nv/linux.bootargs.console |  1 +
>   arch/arm/configs/sama5d4ek_defconfig               |  5 +--
>   arch/arm/mach-at91/Kconfig                         |  1 +
>   12 files changed, 42 insertions(+), 59 deletions(-)
>   delete mode 100644 arch/arm/boards/sama5d4ek/env/bin/init_board
>   create mode 100644 arch/arm/boards/sama5d4ek/env/boot/nand
>   delete mode 100644 arch/arm/boards/sama5d4ek/env/config
>   create mode 100644 arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
>   create mode 100644 arch/arm/boards/sama5d4ek/env/init/mtdparts-nor
>   create mode 100644 arch/arm/boards/sama5d4ek/env/init/ps1
>   create mode 100644 arch/arm/boards/sama5d4ek/env/init/splash
>   create mode 100644 arch/arm/boards/sama5d4ek/env/nv/boot.default
>   create mode 100644 arch/arm/boards/sama5d4ek/env/nv/hostname
>   create mode 100644 arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
>
> diff --git a/arch/arm/boards/sama5d4ek/env/bin/init_board b/arch/arm/boards/sama5d4ek/env/bin/init_board
> deleted file mode 100644
> index f3d417e..0000000
> --- a/arch/arm/boards/sama5d4ek/env/bin/init_board
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -#!/bin/sh
> -
> -PATH=/env/bin
> -export PATH
> -
> -. /env/config
> -
> -splash=/env/splash.png
> -
> -if [ -f ${splash} -a -e /dev/fb0 ]; then
> -	splash -o ${splash}
> -	fb0.enable=1
> -fi
> -
> -exit 1
> diff --git a/arch/arm/boards/sama5d4ek/env/boot/nand b/arch/arm/boards/sama5d4ek/env/boot/nand
> new file mode 100644
> index 0000000..29489bf
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/boot/nand
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +
> +global.bootm.image="/dev/nand0.kernel.bb"
> +global.bootm.oftree="/dev/nand0.oftree.bb"
> +
> +global.linux.bootargs.dyn.root="root=ubi0:rootfs ubi.mtd=rootfs rootfstype=ubifs noinitrd"
> diff --git a/arch/arm/boards/sama5d4ek/env/config b/arch/arm/boards/sama5d4ek/env/config
> deleted file mode 100644
> index 1007345..0000000
> --- a/arch/arm/boards/sama5d4ek/env/config
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -#!/bin/sh
> -
> -# use 'dhcp' to do dhcp in barebox and in kernel
> -# use 'none' if you want to skip kernel ip autoconfiguration
> -ip=dhcp
> -
> -# or set your networking parameters here
> -#eth0.ipaddr=a.b.c.d
> -#eth0.netmask=a.b.c.d
> -#eth0.gateway=a.b.c.d
> -#eth0.serverip=a.b.c.d
> -
> -# can be either 'nfs', 'tftp', 'nor' or 'nand'
> -kernel_loc=nfs
> -# can be either 'net', 'nor', 'nand' or 'initrd'
> -rootfs_loc=net
> -# can be either 'nfs', 'tftp', 'nand' or empty
> -oftree_loc=nfs
> -
> -# can be either 'jffs2' or 'ubifs'
> -rootfs_type=ubifs
> -rootfsimage=root.$rootfs_type
> -ubiroot=rootfs
> -
> -# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
> -kernelimage=zImage
> -#kernelimage=uImage
> -#kernelimage=Image
> -#kernelimage=Image.lzo
> -
> -nand_device=atmel_nand
> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
> -rootfs_mtdblock_nand=7
> -
> -m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
> -
> -autoboot_timeout=3
> -
> -bootargs="console=ttyS0,115200"
> -
> -# set a fancy prompt (if support is compiled in)
> -PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
> diff --git a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
> new file mode 100644
> index 0000000..c947910
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +
> +mtdparts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
> +kernelname="atmel_nand"
> +
> +mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
> diff --git a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nor b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nor
> new file mode 100644
> index 0000000..a773644
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nor
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +
> +mtdparts="64k(at91bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"

Can we keep these partition table the same as u-boot?
64k(bootstrap), 64k(bareboxenv), 512k(barebox), 384k(oftree),-(kernel).

If we do like this, when we change the bootloader, we won't break the 
oftree and kernel partition.

> +kernelname="m25p800"
> +
> +mtdparts-add -d m25p0 -k ${kernelname} -p ${mtdparts}
> diff --git a/arch/arm/boards/sama5d4ek/env/init/ps1 b/arch/arm/boards/sama5d4ek/env/init/ps1
> new file mode 100644
> index 0000000..c0ec1a5
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/init/ps1
> @@ -0,0 +1,7 @@
> +#!/bin/sh
> +
> +if [ ${global.allow_color} = "true" ]; then
> +	export PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
> +else
> +        export PS1="barebox@\h:\w "
> +fi

I think use default one is also OK. Anyway, depends on you.

> diff --git a/arch/arm/boards/sama5d4ek/env/init/splash b/arch/arm/boards/sama5d4ek/env/init/splash
> new file mode 100644
> index 0000000..190ef31
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/init/splash
> @@ -0,0 +1,10 @@
> +#!/bin/sh
> +
> +splash=/env/splash.png
> +
> +if [ -f ${splash} -a -e /dev/fb0 ]; then
> +	splash -o ${splash}
> +	fb0.enable=1
> +fi
> +
> +exit 1
> diff --git a/arch/arm/boards/sama5d4ek/env/nv/boot.default b/arch/arm/boards/sama5d4ek/env/nv/boot.default
> new file mode 100644
> index 0000000..d287b22
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/nv/boot.default
> @@ -0,0 +1 @@
> +nand net
> diff --git a/arch/arm/boards/sama5d4ek/env/nv/hostname b/arch/arm/boards/sama5d4ek/env/nv/hostname
> new file mode 100644
> index 0000000..b74056d
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/nv/hostname
> @@ -0,0 +1 @@
> +sama5d4ek

I am considering do we really need to add this into nv?

> diff --git a/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console b/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
> new file mode 100644
> index 0000000..476b1fb
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
> @@ -0,0 +1 @@
> +console=ttyS0,115200
> diff --git a/arch/arm/configs/sama5d4ek_defconfig b/arch/arm/configs/sama5d4ek_defconfig
> index bbf254a..f050fe4 100644
> --- a/arch/arm/configs/sama5d4ek_defconfig
> +++ b/arch/arm/configs/sama5d4ek_defconfig
> @@ -9,13 +9,12 @@ CONFIG_MALLOC_SIZE=0xA00000
>   CONFIG_EXPERIMENTAL=y
>   CONFIG_MALLOC_TLSF=y
>   CONFIG_PROMPT="A5D4EK:"
> -CONFIG_GLOB=y
>   CONFIG_PROMPT_HUSH_PS2="y"
>   CONFIG_HUSH_FANCY_PROMPT=y
>   CONFIG_CMDLINE_EDITING=y
>   CONFIG_AUTO_COMPLETE=y
>   CONFIG_CONSOLE_ACTIVATE_ALL=y
> -CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
>   CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/sama5d4ek/env"
>   CONFIG_DEBUG_INFO=y
>   # CONFIG_CMD_ARM_CPUINFO is not set
> @@ -35,6 +34,8 @@ CONFIG_CMD_PARTITION=y
>   CONFIG_CMD_EXPORT=y
>   CONFIG_CMD_LOADENV=y
>   CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_MAGICVAR=y
> +CONFIG_CMD_MAGICVAR_HELP=y
>   CONFIG_CMD_SAVEENV=y
>   CONFIG_CMD_FILETYPE=y
>   CONFIG_CMD_SLEEP=y
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index b85e6fa..5b27526 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -494,6 +494,7 @@ choice
>
>   config MACH_SAMA5D4EK
>   	bool "Atmel SAMA5D4 Evaluation Kit"
> +	select HAVE_DEFAULT_ENVIRONMENT_NEW
>   	help
>   	  Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit.
>
>

Best Regards,
Bo Shen

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2015-02-13  5:55 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-13  5:27 Doug Brainard
2015-02-13  5:30 ` Doug Brainard
2015-02-13  5:52 ` Bo Shen [this message]
2015-02-15 20:32   ` Doug Brainard
2015-02-16  6:24     ` Sascha Hauer
2015-02-22 17:58   ` Doug Brainard
2015-02-23  9:29     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54DD9130.40606@atmel.com \
    --to=voice.shen@atmel.com \
    --cc=barebox@lists.infradead.org \
    --cc=dbrainard@brainardinsight.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox