Re: Secure barebox

[Moritz Warning <m.warning@meteocontrol.de>]

Thanks for the information!

On 06/01/2015 02:06 PM, Sascha Hauer wrote:
> Hi Moritz,
>
> On Mon, Jun 01, 2015 at 11:34:23AM +0200, Moritz Warning wrote:
>> Hi,
>>
>> I like to secure access to barebox using a password.
>> passwd seems to be the right command, but setting a
>> password does not seem to have any effect.
>>
>> After a reset, access to barebox is not limited as far
>> as I can tell.
>
> I've never really used password support. I just gave it a try and I can
> only say: It's not usable in its current state. The thing you were
> missing is: You must set nv.login.timeout to something nonzero:
>
> nv.login.timeout=3; saveenv
>
> Then afterwards I get asked for a password. If I enter this correctly I
> get to the prompt, if I enter the wrong password I'm asked for a
> password again. However, when I press ctrl-c or just an empty password I
> also get to the prompt.
> The password protection support is currently implemented in the
> /env/bin/init script. This makes the whole stuff very fragile. The
> barebox shell is not designed to be secure. Once the shell is started
> the system is insecure, so the password asking process should be done
> before entering the shell, not from the shell.
>
> Sascha
>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox