Hello list,
here I am (again!) ;-)

Now I have downloaded the linux 4.5-rc6 (because I would like to use 
etnaviv gpu driver), configured as imx_v6_v7_defconfig, added the 
DEBUG_LL stuff for uart3 and added in the Makefile for dts my dts (more 
or less like Barebox one [in attachment] ), but here is what I get 
(compiling the kernel with DEBUG_LL for uart3):

> barebox 2016.02.0 #1 Mon Mar 7 13:15:11 CET 2016
>
>
> Board: EK360 Eurek i.MX6 Quad
> detected i.MX6 Quad revision 1.5
> mdio_bus: miibus0: probed
> imx-usb 2184200.usb: USB EHCI 1.00
> imx-esdhc 2194000.usdhc: registered as 2194000.usdhc
> imx-esdhc 2198000.usdhc: registered as 2198000.usdhc
> imx-esdhc 219c000.usdhc: registered as 219c000.usdhc
> imx-ipuv3 2400000.ipu: IPUv3H probed
> imx-ipuv3 2800000.ipu: IPUv3H probed
> netconsole: registered as netconsole-1
> malloc space: 0x2ff7c160 -> 0x4fef82bf (size 511.5 MiB)
> environment load /dev/env0: No such file or directory
> Maybe you have to create the partition.
> running /env/bin/init...
> mmc2: detected SD card version 2.0
> mmc2: registered mmc2
> ext4 ext40: EXT2 rev 1, inode_size 128
> Hit CTRL-C key to stop autoboot: 1
> Running boot from uSD/MMC or USB...
> Booting...
>     Image Name:   Linux-4.5.0-rc6-EK20160302
>     Created:      2016-03-07 12:30:32 UTC
>     OS:           Linux
>     Architecture: ARM
>     Type:         Kernel Image
>     Compression:  uncompressed
>     Data Size:    6636352 Bytes = 6.3 MiB
>     Load Address: 10008000
>     Entry Point:  10008000
>
> Loading U-Boot uImage '/mnt/uImage'
> Loading devicetree from '/mnt/dtb'
> commandline: console=ttymxc2,115200 rootwait noswap ip=none noinitrd rootfstype=nilfs2 root=/dev/mmcblk2p3 fec.macaddr=0x7a,0x3f,0x03,0xe3,0xa2,0xff
> Uncompressing Linux... done, booting the kernel.
>
> Error: unrecognized/unsupported machine ID (r1 = 0x00000000).
>
> Available machine support:
>
> ID (hex) NAME
> ffffffff Generic DT based system
> ffffffff Freescale i.MX6 Quad/DualLite (Device Tree)
>
> Please check your kernel config and/or bootloader.

It looks like something were wrong with devicetree or other machine 
identifier stuff...


Where is the issue???

Regards,
-- 
Eurek s.r.l.                          |
Electronic Engineering                | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy  | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377  | Fax:   +39-(0)542-609212