From: Darren Garnier <dgarnier@reinrag.net>
To: barebox@lists.infradead.org
Subject: [PATCH 4/4] ARM: support for CPO Science DataCollector II
Date: Mon, 2 Sep 2013 22:22:58 -0400 [thread overview]
Message-ID: <58FB74C2-85EF-43A1-A491-D78CF5DA585E@reinrag.net> (raw)
Signed-off-by: Darren Garnier <dgarnier@reinrag.net>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/cpodc2/Makefile | 4 +
arch/arm/boards/cpodc2/env/boot/dataflash | 10 +
arch/arm/boards/cpodc2/env/boot/net-usb | 22 ++
arch/arm/boards/cpodc2/env/config-board | 6 +
arch/arm/boards/cpodc2/env/dfu.png | Bin 0 -> 1669 bytes
arch/arm/boards/cpodc2/env/init/automount | 12 +
arch/arm/boards/cpodc2/env/init/msp430 | 10 +
arch/arm/boards/cpodc2/env/init/mtdparts | 19 ++
arch/arm/boards/cpodc2/env/init/splash | 8 +
arch/arm/boards/cpodc2/env/init/usb | 55 ++++
arch/arm/boards/cpodc2/env/splash.png | Bin 0 -> 1356 bytes
arch/arm/boards/cpodc2/env/usb.png | Bin 0 -> 339 bytes
arch/arm/boards/cpodc2/init.c | 364 +++++++++++++++++++++
arch/arm/boards/cpodc2/lowlevel_init.c | 108 +++++++
arch/arm/boards/cpodc2/msp430.c | 513 ++++++++++++++++++++++++++++++
arch/arm/boards/cpodc2/msp430.h | 23 ++
arch/arm/configs/cpodc2_defconfig | 96 ++++++
arch/arm/mach-at91/Kconfig | 24 ++
19 files changed, 1275 insertions(+)
create mode 100644 arch/arm/boards/cpodc2/Makefile
create mode 100755 arch/arm/boards/cpodc2/env/boot/dataflash
create mode 100755 arch/arm/boards/cpodc2/env/boot/net-usb
create mode 100755 arch/arm/boards/cpodc2/env/config-board
create mode 100644 arch/arm/boards/cpodc2/env/dfu.png
create mode 100755 arch/arm/boards/cpodc2/env/init/automount
create mode 100644 arch/arm/boards/cpodc2/env/init/msp430
create mode 100755 arch/arm/boards/cpodc2/env/init/mtdparts
create mode 100755 arch/arm/boards/cpodc2/env/init/splash
create mode 100755 arch/arm/boards/cpodc2/env/init/usb
create mode 100644 arch/arm/boards/cpodc2/env/splash.png
create mode 100644 arch/arm/boards/cpodc2/env/usb.png
create mode 100644 arch/arm/boards/cpodc2/init.c
create mode 100644 arch/arm/boards/cpodc2/lowlevel_init.c
create mode 100644 arch/arm/boards/cpodc2/msp430.c
create mode 100644 arch/arm/boards/cpodc2/msp430.h
create mode 100644 arch/arm/configs/cpodc2_defconfig
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 38ef512..0c93187 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MACH_CCMX51) += ccxmx51/
obj-$(CONFIG_MACH_CFA10036) += crystalfontz-cfa10036/
obj-$(CONFIG_MACH_CHUMBY) += chumby_falconwing/
obj-$(CONFIG_MACH_CLEP7212) += clep7212/
+obj-$(CONFIG_MACH_CPODC2) += cpodc2/
obj-$(CONFIG_MACH_DFI_FS700_M60) += dfi-fs700-m60/
obj-$(CONFIG_MACH_DSS11) += dss11/
obj-$(CONFIG_MACH_EDB93012) += edb93xx/
diff --git a/arch/arm/boards/cpodc2/Makefile b/arch/arm/boards/cpodc2/Makefile
new file mode 100644
index 0000000..2bfa4fa
--- /dev/null
+++ b/arch/arm/boards/cpodc2/Makefile
@@ -0,0 +1,4 @@
+obj-y += init.o
+obj-$(CONFIG_CPODC2_MSP430) += msp430.o
+
+lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
diff --git a/arch/arm/boards/cpodc2/env/boot/dataflash b/arch/arm/boards/cpodc2/env/boot/dataflash
new file mode 100755
index 0000000..bc59750
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/boot/dataflash
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "dataflash"
+ exit
+fi
+
+global.bootm.image="/dev/dataflash0.kernel"
+#global.bootm.oftree="/env/oftree"
+global.linux.bootargs.dyn.root="root=ubi0:rootfs ubi.mtd=nand0.root rootfstype=ubifs"
diff --git a/arch/arm/boards/cpodc2/env/boot/net-usb b/arch/arm/boards/cpodc2/env/boot/net-usb
new file mode 100755
index 0000000..6e341a0
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/boot/net-usb
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "network (tftp, nfs) (usb ethernet)"
+ exit
+fi
+
+usb -f
+ethact eth1
+
+if [ $? -ne 0 ]; then
+ echo "ERROR: usb ethernet not found"
+ exit 1
+fi
+
+path="/mnt/tftp"
+
+global.bootm.image="${path}/${global.user}-linux-${global.hostname}"
+#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
+nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
+bootargs-ip
+global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
diff --git a/arch/arm/boards/cpodc2/env/config-board b/arch/arm/boards/cpodc2/env/config-board
new file mode 100755
index 0000000..8ee2290
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/config-board
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+global.hostname=cpodc2
+global.user=cpodc2
+global.autoboot_timeout=1
+global.boot.default=dataflash
diff --git a/arch/arm/boards/cpodc2/env/dfu.png b/arch/arm/boards/cpodc2/env/dfu.png
new file mode 100644
index 0000000000000000000000000000000000000000..a8f2cdd96c739efb4d8985a51f76499f31c6a05e
GIT binary patch
literal 1669
zcmZ`)XH-*Z5PcF@l_o{1peRL}lH>_uSy2c|389EeixSW$2nig6^csQ~60xD?xki_;
zB%p|j5k&+M5GetLAP9lu>Y4y5EKLYfvTxn9$3MGsX6Al#=g!Q}kKseur>1PE3;=+d
zyBp3AK`9btD^N%dNHEDpAj=2u?~0&YE{9<l1VN!t2tg14Aq5N|_4fc^2!MqU2qFy-
z0FXW`L^=op00<ys2n!<AcZFPzh#&|Cg~&Jr%V9u>=pYbA_Q8-`j+{XDK`_EVfE>99
zK|$V*!vLW4%pJGKKe2z56PdEcN;MPXoWCP*YsVWSFA=$ata4HA6kDaKN_{*?erl5D
zj?K<YFf+@VV&%wQ;V3*;fhntnE%(F+R&}tE7e8}E;lgy{Pv<cPm;Ux`g=mX#EM&^|
z$S>Z6_W{Kx`cx&*L4Uo1JF&OSg$@hx7b?`Ko5L$L$mZc#MEYMIPt_GDJYb-N$L{9n
zqV--C1<$Q^{W@-tHzAJnQKIGiFv*)&n)=@l|8xF-^8=J{Mh^EV$L-nHwvs3#ulu||
zPBXXPd*dk7vCFc$l!jYZP_X~ZTF0E>tbgI&54$edy)!kvsQ5tZ?a}xYiRHT+oSHPz
zW=Xutjfy~mXJq@_lCX8YQWjrLtWPDdy<qC2nrg9O#}MyM)uKxqM@k=k07A?tYJwhG
zDTGL595f{hEH2MX@?H#79{I+udk_VWOP8SI+8(0#r*o<4OOd@#9*yndL{-JCotknF
zbG~SQ$G6_MM-gXbzQK0dnyez4DUln{9vYU=WQEe|15CT-qA2YT;=Y2$zQbFUy{Lm)
z=j#1!j`ZawE85H$XL$Z<gZBDu(|Tjer`9~@KkheG2|8%Y%bv5yZF)HC)B||8{MyDU
z);85`#q$;z`+42x@0cS4(O0M|sfmfnhAWC^{TG4JRDz;N6&GUT>VA*e({Y9FWjUrY
z5u21W;^-@(+;Smu1$kB){+QdCej@7{<tyKbqinEOPT?jpBHNXc6fq)~9i$znjPJir
z_+ZK!YZ}yR*k2dd)EIqwWCZ8RZftbi-ZfoVk6m8zZION+{}vTNKGseQRfY@dpLB(E
z<*P#%tZtSF^$W9V?TYNzaWS6>9tyGJBbrdEmS!nyU@w^d?1oWkBPFfZoJV0T@iX3r
z`rXcGjwA=oTFeeg-Y>l;jVGN5gC)z}p3KK|R(Um3VQw|F1;qOw^I0A?pe4%IS2h_o
z#ha<D>b6vGZmIj^qMfXF$sRxLsUAH(YfADFT$384Y^*#dexZ=E6|6k1==(fwDYsh}
zk|}7LDK&g$Q?_>=GCs_37lhj?X^D1w*lr*v8)0mLKu2vhHaNiXWYA~{`s#5W#vQ0^
z*1?}?>efo;=1riO3+qh+b+OM5zO<F9outE5SMgf)T$1koi?4A*E*Q>>Y}t*Yn|QAH
zBCVG$d@Qqcp^oicURQ8R*wFj(Zf;kEXfA{|ca;6`D*Di~YzI<T?(eY6BYXVNO{cSS
zGMNn9Xfo-^wq`JH?F+5P@|gD!S~AhL{#!Ui06y`Vgs5ytLnEpzklMcz&zi$Y*Fypa
zreWt$dqZ2BMlLsPcpyIs7qVhc0F!trifTlYqQkwIuvP4JA1pOIF95}<vp9Id;+J9?
z=8f+gy26%1y5X6g1DOH5HIuSd{-M6YXssqqNmiNcl3k|Pgt6zc6@l$XnLE#UUs-<t
z<JH<pR0Rp|IT)jZE>K0+Pp@nxSWrx(?{DnUN%8Ak(2l=e_-#@r_;Ae2?d3sVavUoB
zz8uprVMLIQ6jp@Ukth)~?hbxHU{2T1ZT#}M1T`~;+n=?IbDM_-8qW$#N;tNIZPsc2
zYBrXrM+4m+vvh;8(uMQ3Gq-B^G?>Rde<eL5V?p0><md<mv~F!V8_*xqy&7yEKGK=y
zX0DGORPQB+l2W%1znXV8X<miyEH_GVB3iI(b0*K8$SXn#zi=bzIb4okznch!$G$HU
z+w&iLs<qm*M7Hc1pD^}zxYiqzFt8BQ{KDkPh0mXvYb~8pACCc3GxM{-l~8chRM@))
z1)X`ZSl!W%k`W+e*4*6`^iY}}ld<qnUIWixj+n2bH*sd-KCWvb+N)5NLYE=G0^sgS
Kz?D0P(*6Q%7!#@h
literal 0
HcmV?d00001
diff --git a/arch/arm/boards/cpodc2/env/init/automount b/arch/arm/boards/cpodc2/env/init/automount
new file mode 100755
index 0000000..3227619
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/init/automount
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Automountpoints"
+ exit
+fi
+
+mkdir -p /mnt/tftp
+automount /mnt/tftp 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp'
+
+mkdir -p /mnt/fat
+automount -d /mnt/fat 'usb && [ -e /dev/disk0.0 ] && mount /dev/disk0.0 /mnt/fat'
diff --git a/arch/arm/boards/cpodc2/env/init/msp430 b/arch/arm/boards/cpodc2/env/init/msp430
new file mode 100644
index 0000000..0639313
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/init/msp430
@@ -0,0 +1,10 @@
+#!/bin/sh
+# reset it if it needs it
+msp430 -r
+# wait a moment for it to recover
+msleep 500
+
+msp430 -i -M msp_fw_major -m msp_fw_minor -S msp_serial -T msp_boardtype
+
+msp430 -b on
+
diff --git a/arch/arm/boards/cpodc2/env/init/mtdparts b/arch/arm/boards/cpodc2/env/init/mtdparts
new file mode 100755
index 0000000..81c18b4
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/init/mtdparts
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "MTD Partitions"
+ exit
+fi
+
+mtdparts="0x4200(dataflash0.bootstrap),0x4200(dataflash0.bareboxenv),0x39C00(dataflash0.barebox),0x1BE000(dataflash0.kernel)"
+mtdparts-add -d dataflash0 -p ${mtdparts}
+
+# mtdparts broken for - partitions
+mtdparts="256M(nand0.root)"
+kernelname="atmel_nand"
+# we don't really need this unless doing dfu...
+#mtdparts-add -b -d nand0 -p ${mtdparts} -k ${kernelname}
+
+mtdparts="-(nand0.root)"
+global linux.mtdparts.nand0
+global.linux.mtdparts.nand0="${kernelname}:${mtdparts}"
diff --git a/arch/arm/boards/cpodc2/env/init/splash b/arch/arm/boards/cpodc2/env/init/splash
new file mode 100755
index 0000000..18e74df
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/init/splash
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+splash=/env/splash.png
+
+if [ -f ${splash} -a -e /dev/fb0 ]; then
+ splash -o ${splash}
+ fb0.enable=1
+fi
diff --git a/arch/arm/boards/cpodc2/env/init/usb b/arch/arm/boards/cpodc2/env/init/usb
new file mode 100755
index 0000000..ca7f017
--- /dev/null
+++ b/arch/arm/boards/cpodc2/env/init/usb
@@ -0,0 +1,55 @@
+#!/bin/sh
+
+pre_wait=2
+post_wait=3
+polarity=1
+
+dfu_config="/dev/dataflash0.bootstrap(bootstrap)sr,/dev/dataflash0.bareboxenv(bareboxenv)sr,/dev/dataflash0.barebox(barebox)sr,/dev/dataflash0.kernel(kernel)sr,/dev/nand0.root.bb(root)r"
+
+echo
+
+if [ $at91_udc0.vbus != 1 ]; then
+ echo "No USB Device cable plugged, normal boot"
+ exit
+fi
+
+splash=/env/usb.png
+if [ -f ${splash} -a -e /dev/fb0 ]; then
+ splash -y 20 -x 280 ${splash}
+ fb0.enable=1
+fi
+
+timeout -s -a ${pre_wait}
+
+gpio_get_value ${dfu_button}
+if [ $? = ${polarity} ]; then
+ echo "dfu_button detected wait ${post_wait}s"
+ timeout -s -a ${post_wait}
+
+ if [ $at91_udc0.vbus != 1 ]; then
+ echo "No USB Device cable plugged, normal boot"
+ exit
+ fi
+
+ gpio_get_value ${dfu_button}
+ if [ $? = ${polarity} ]; then
+ echo "Start DFU Mode"
+ splash=/env/dfu.png
+ if [ -f ${splash} -a -e /dev/fb0 ]; then
+ splash -o -b 0 ${splash}
+ fi
+ # mount mtd for dfu writing...
+ mtdparts="256M(nand0.root)"
+ mtdparts-add -b -d nand0 -p ${mtdparts}
+
+ #Use NetChip's donated numbers
+ dfu ${dfu_config} -P 0xFFFF -V 0x0525 -m "CPO Science" -p "DataCollector (DFU mode)"
+ #if the dfu works.. we want to reboot
+ reset
+ #exit
+ fi
+fi
+
+global.autoboot_timeout=16
+echo "enable tty over USB Device, waiting ${global.autoboot_timeout}s"
+usbserial
diff --git a/arch/arm/boards/cpodc2/env/splash.png b/arch/arm/boards/cpodc2/env/splash.png
new file mode 100644
index 0000000000000000000000000000000000000000..36e8ed1d9849a36d763dbc6750ad953cc35a0a68
GIT binary patch
literal 1356
zcmV-S1+)5zP)<h;3K|Lk000e1NJLTq008g+002M;0{{R36F~~q0001BP)t-s0096n
z4kR2M8&DKXE-MvEBOM7dO)M@eLqkB6CXW(WcT`pbi9{+eUoTQrQ3i3c@IW?YXJo-!
zNPd5Pg@=S8rrR^KZ}gECqNJgay*9qUy~)eS)z{SD;@<x90R8{`0k=xK000E1Nkl<Z
zXx{CZ>vp3c5P&V)Msl;AVpA3+y#HIS+y_KWPj}DusPiWY0-2AwVpZ+3%Pza@vdiY=
za5^3Ax2Ipn<J0PSU$q$Gr=ym&6CVultNwblvJK#aH}LWJYn`Cv^l>5)n5-W7L(9R(
z@cLc)WPnf3#HVWYNy`F%q=RcNOC(r$D^f7<>Km-XMo6!>+jUEpCAZtQh_4#>wgWG?
z#US|eUkWfM@W@{=rM~3S4Od1uEbOX;)@AsVU(#N$R9^#@DhjW^4~&x*MVm|dV}OOW
zZ!3&i;`_i+gi55Ze+V!Os|SPh<Zl6!Ugbi67;sg!OEz8vzMh{G`wA1h(9QbK{{z;<
zEVa`DaQ6K7AkR@1)l?{)#ni$n;Ig-oIbbqBe*|20XgwIG><1eW!SzZZwAw<rEvQYw
z?eNo$T{W;xS-B6Bj)(8HUC7BCaBBlU(T*^i2D#lBg!vg1YVA*d$}p%}HTc*Iz%-gT
z<eaW1Mi1f#?EXB&W>dMb2+T$<TvsWI7B&e?OOYQJ+O1ilP@|&4VcTZp^BM4fDZ@X4
zHwSn<kV{Kn#+ZKY4nYH(Fa2b2CCRLx0OmN?@lw{8Bm;&~di0OmSzwPOqkWoq@DZ5D
zqc;f7tDapA#)_7Tm9*X%EtLRUW3>R*g&TYbf=iD9(tMQ~-nm3)k5fkAHtQ~OV6aFW
zyAq6nYaAIQ0((IYTjl!?O6%FR@Gv7_8RCHmKSpB~)Pqfyv<y0ggW>)mo6pi_Ut$#I
zNh-^M+ay5w<G{uOwLdiL)HyK3Id&)T9Db1HSsGBZb2nJ7S!G~I3D^iYO?~unVEmv(
znqgo)E`5*Rxdp+3#X8*L5OPylv8<O}I;*#&0Gwf1;Pd@{o&|0ca{t;nX%5`wEgEwr
zV!H8=`2V>5!HT_3IcYJ~r9ck?-|voCPGsrS%~YzH2UZ1OIuD%GFBZ4ui@?&wyZjz-
zTl7E|YdG1JEG$hLM*_|p<}C~b3oimUb{(XfLjjm3F7NB`{r)?8YqE#!jtD*oHW9;o
zR6KJVj)0RTD25k-r9(?2kdJ_QvQ-=6@_feSRwU(@dS!Za7ncQKrp9&7r1!8N&4C%p
z;rJYvfCZ}Z1SjDfm?p<v(9fD!I%9(L3Zb4;cx#X9Fgh&WHMoHL;}&^Jh&OJ)b$A|F
zw*ovkX*kYW7CNn=1+8)OM2h)X>&TeEt+Q>8TGqzias+IiNd}E6N`2$+HJX6gl|4;?
z!9SIu*_;9vuHcCz&(ur3bnmY_!&r-eUoMwX|DU|%!M$|%NH5(__0mbwFZa@X_MKMp
z;;HUK%S%ZCnAj+_T_6Jf{QSJ&8Oi-7Q(R2mmKa(X%66CYCRL8-7pw)~p0hLw61T%}
z-z@?Az*K@(2>5vb{tPpMiUK!g_M)wPbQbT!wL6v`#tR2;FO_vF(%TW6yueIK4M1ln
zG_1*oqJ`azK}M5EVc|$96edxCW^M`m^B3E>gc#ms&2o9$n3><+-d=X#-KE!u{k|<T
zzr4R+wg#*%OfDDml9JN(BNNw&Xl_a=*@mH=g~=8yyvr`T?6S))56T}~&+3n?60v9i
O0000<MNUMnLSTZ8qK35q
literal 0
HcmV?d00001
diff --git a/arch/arm/boards/cpodc2/env/usb.png b/arch/arm/boards/cpodc2/env/usb.png
new file mode 100644
index 0000000000000000000000000000000000000000..6eed849142f96d404c82be3a1aa5ee9363839223
GIT binary patch
literal 339
zcmV-Z0j&OsP)<h;3K|Lk000e1NJLTq001BW002M)0{{R3iJ)km0000OP)t-s0RaIi
zDJf1)PIh*7k&%(Hv9Zm~&HViQd&z7Y0002?Nkl<ZILoEeJr9B~5C&jM`B=e0R-9ao
ziz}O}gNd`oz^a0M|GuTP(7Qwp%GM`^d)qsL;N6pPxUjW+GAK||*yBdl0-*0iHELQ%
zDqiJB$n!k&K>|4Z3E}r0`al)Uft5LW=|GrU5)CQ>3D6QK%w>Iol)s|$oh?Y1(-&Q4
zp%`u{ZEX&L2L;zX2X4a%V|y)(8yrmix6sG4(3worfW$D+db80-M>Vx^r!o!xwCIAg
z*=uYl2q-oVOB@xSN(PdHF3lj}5X~RUNYPOb8(e8sf0~AN(jO-7!T-rp1JxWz_%}=y
llJ%tFPLk^lH2Y#}*DoRUUl?ijBf9_q002ovPDHLkV1fr|kBtBT
literal 0
HcmV?d00001
diff --git a/arch/arm/boards/cpodc2/init.c b/arch/arm/boards/cpodc2/init.c
new file mode 100644
index 0000000..7bad587
--- /dev/null
+++ b/arch/arm/boards/cpodc2/init.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <partition.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <io.h>
+#include <asm/hardware.h>
+#include <nand.h>
+#include <sizes.h>
+#include <linux/mtd/nand.h>
+#include <mach/cpu.h>
+#include <mach/at91_pmc.h>
+#include <mach/board.h>
+#include <gpio.h>
+#include <mach/io.h>
+#include <mach/iomux.h>
+#include <mach/at91sam9_smc.h>
+#include <dm9000.h>
+#include <gpio_keys.h>
+#include <readkey.h>
+#include <led.h>
+#include <spi/spi.h>
+
+#ifdef CONFIG_CPODC2_MSP430
+#include "msp430.h"
+#endif
+
+static struct atmel_nand_data nand_pdata = {
+ .ale = 22,
+ .cle = 21,
+ .det_pin = -EINVAL,
+ .rdy_pin = AT91_PIN_PC15,
+ .enable_pin = AT91_PIN_PC14,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+ .on_flash_bbt = 1,
+};
+
+static struct sam9_smc_config dc_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 2,
+};
+
+static void dc_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (nand_pdata.bus_width_16)
+ dc_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ dc_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(0, 3, &dc_nand_smc_config);
+
+ at91_add_device_nand(&nand_pdata);
+}
+
+/*
+ * USB OHCI Host port
+ */
+#ifdef CONFIG_USB_OHCI_AT91
+static struct at91_usbh_data __initdata usbh_data = {
+ .ports = 1,
+ //.vbus_pin = { AT91_PIN_PD0, -EINVAL },
+};
+
+static void __init dc_add_device_usbh(void)
+{
+ if (cpu_is_at91sam9g10()) // add it just for boards with 9g10
+ at91_add_device_usbh_ohci(&usbh_data);
+}
+#else
+static void __init dc_add_device_usbh(void) {}
+#endif
+
+
+#if defined(CONFIG_USB_GADGET_DRIVER_AT91)
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata dc_udc_data = {
+ .vbus_pin = AT91_PIN_PB29,
+ .pullup_pin = 0,
+};
+
+static void dc_add_device_udc(void)
+{
+ at91_add_device_udc(&dc_udc_data);
+}
+#else
+static void dc_add_device_udc(void) {}
+#endif
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_DRIVER_VIDEO_ATMEL)
+static int dc_gpio_request_output(int gpio, const char *name)
+{
+ int ret;
+
+ ret = gpio_request(gpio, name);
+ if (ret) {
+ pr_err("%s: can not request gpio %d (%d)\n", name, gpio, ret);
+ return ret;
+ }
+
+ ret = gpio_direction_output(gpio, 1);
+ if (ret)
+ pr_err("%s: can not configure gpio %d as output (%d)\n", name, gpio, ret);
+ return ret;
+}
+
+/* TFT */
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "320x240@60",
+ .refresh = 60,
+ .xres = 320, .yres = 240,
+ .pixclock = KHZ2PICOS(6210),
+
+ .left_margin = 62, .right_margin = 14,
+ .upper_margin = 18, .lower_margin = 3,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
+ | ATMEL_LCDC_INVVD_INVERTED \
+ | ATMEL_LCDC_INVFRAME_INVERTED \
+ | ATMEL_LCDC_INVLINE_INVERTED \
+ | ATMEL_LCDC_INVCLK_INVERTED \
+ | ATMEL_LCDC_INVDVAL_INVERTED \
+ )
+
+static void at91_lcdc_tft_power_control(int on)
+{
+ if (on)
+ gpio_set_value(AT91_PIN_PA12, 0); /* power up */
+ else
+ gpio_set_value(AT91_PIN_PA12, 1); /* power down */
+}
+
+static struct atmel_lcdfb_platform_data dc_lcdc_data = {
+ .lcdcon_is_backlight = false,
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
+ .guard_time = 1,
+ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
+ .mode_list = at91_tft_vga_modes,
+ .num_modes = ARRAY_SIZE(at91_tft_vga_modes),
+};
+
+static int at91_lcdc_gpio(void)
+{
+ return dc_gpio_request_output(AT91_PIN_PA12, "lcdc_tft_power");
+}
+
+static void dc_add_device_lcdc(void)
+{
+ if (at91_lcdc_gpio())
+ return;
+
+ dc_lcdc_data.have_intensity_bit = cpu_is_at91sam9261();
+
+ dc_lcdc_data.lcd_wiring_mode = cpu_is_at91sam9261() ? ATMEL_LCDC_WIRING_RGB
+ : ATMEL_LCDC_WIRING_BGR;
+
+ at91_add_device_lcdc(&dc_lcdc_data);
+}
+
+#else
+static void dc_add_device_lcdc(void) {}
+#endif
+
+static void __init dc_add_device_buttons(void)
+{
+ // this first call is necessary to turn on clocks for gpio...
+ gpio_request(AT91_PIN_PB30,"go_button");
+ gpio_direction_input(AT91_PIN_PB30);
+ // don't use pullup here.. so don't need this hack.
+ at91_set_gpio_input(AT91_PIN_PB30, 0);
+ //at91_set_deglitch(AT91_PIN_PB30, 1);
+
+ gpio_request(AT91_PIN_PC2, "ts_pen");
+ gpio_direction_input(AT91_PIN_PC2);
+ at91_set_gpio_input (AT91_PIN_PC2, 1); // pullup
+ at91_set_deglitch (AT91_PIN_PC2, 1);
+
+ export_env_ull("dfu_button", AT91_PIN_PB30);
+}
+
+/*
+ * SPI related devices
+ */
+#if defined(CONFIG_DRIVER_SPI_ATMEL)
+static struct spi_board_info dc_spi_devices[] = {
+ { /* DataFlash chip */
+ .name = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+};
+
+static unsigned spi0_standard_cs[] = { AT91_PIN_PA3, AT91_PIN_PA6};
+static struct at91_spi_platform_data spi_pdata = {
+ .chipselect = spi0_standard_cs,
+ .num_chipselect = ARRAY_SIZE(spi0_standard_cs),
+};
+
+static void dc_add_device_spi(void)
+{
+ spi_register_board_info(dc_spi_devices,
+ ARRAY_SIZE(dc_spi_devices));
+ at91_add_device_spi(0, &spi_pdata);
+}
+#else
+static void dc_add_device_spi(void) {}
+#endif
+
+static int cpodc2_mem_init(void)
+{
+ at91_add_device_sdram(0);
+
+ return 0;
+}
+mem_initcall(cpodc2_mem_init);
+
+static int __init main_clock(void)
+{
+ int tmp;
+ static int main_clock = 0;
+
+ // this works for both boards, but only if at91boostrap was used first to setup the PLL lock.
+ if (!main_clock) {
+ do { // wait for PLL lock..
+ tmp = at91_pmc_read(AT91_CKGR_MCFR);
+ } while (!(tmp & AT91_PMC_MAINRDY));
+ tmp = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
+ main_clock = (tmp > 19500000) ? 20000000 : 18432000;
+ }
+
+ return main_clock;
+}
+
+static int cpodc2_devices_init(void)
+{
+ u32 board_revision = 0;
+
+ dc_add_device_spi();
+ dc_add_device_nand();
+ dc_add_device_udc();
+ dc_add_device_usbh();
+ dc_add_device_buttons();
+ dc_add_device_lcdc();
+
+ if (! IS_ENABLED(CONFIG_MTD_DATAFLASH)) {
+ if (IS_ENABLED(CONFIG_AT91_LOAD_BAREBOX_SRAM)) {
+ devfs_add_partition("nand0", 0, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
+ export_env_ull("borebox_first_stage", 1);
+ } else {
+ devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "bootstrap_raw");
+ dev_add_bb_dev("bootstrap_raw","bootstrap");
+ devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
+ }
+ dev_add_bb_dev("self_raw", "self0");
+ devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
+ dev_add_bb_dev("env_raw", "env0");
+ devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
+ dev_add_bb_dev("env_raw1", "env1");
+ } else { // dataflash partitions
+ devfs_add_partition("dataflash0", 0x00000, 0x4200, DEVFS_PARTITION_FIXED, "bootstrap");
+ devfs_add_partition("dataflash0", 0x04200, 0x4200, DEVFS_PARTITION_FIXED, "env0");
+ devfs_add_partition("dataflash0", 0x08400, 0x39C00, DEVFS_PARTITION_FIXED, "self0");
+ }
+
+ // we should probably also get revision data from the msp430
+ // but it takes a while to load...
+ // just fix based on whether CPU is 9g10
+
+ if (nand_pdata.bus_width_16)
+ board_revision |= (1<<31);
+
+ if (cpu_is_at91sam9g10())
+ board_revision |= (0x01<<8);
+
+ if (main_clock() > 19500000)
+ board_revision |= (0x01<<10);
+
+ armlinux_set_revision(board_revision);
+ armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+ armlinux_set_architecture(MACH_TYPE_CPODC2);
+
+ return 0;
+}
+device_initcall(cpodc2_devices_init);
+
+static int cpodc2_console_init(void)
+{
+ barebox_set_model("CPO Science DataCollector II");
+ barebox_set_hostname("cpodc2");
+
+ at91_register_uart(0, 0);
+#ifdef CONFIG_CPODC2_MSP430
+ at91_register_uart(1, 0);
+ // deactivate console and use it for the msp command
+ cpodc2_msp430_init_console("atmel_usart1");
+#endif
+ return 0;
+}
+console_initcall(cpodc2_console_init);
+
+static int cpodc2_main_clock(void)
+{
+ // bootloader should have set the frequency:
+ at91_set_main_clock(main_clock());
+
+ return 0;
+}
+pure_initcall(cpodc2_main_clock);
+
diff --git a/arch/arm/boards/cpodc2/lowlevel_init.c b/arch/arm/boards/cpodc2/lowlevel_init.c
new file mode 100644
index 0000000..0565841
--- /dev/null
+++ b/arch/arm/boards/cpodc2/lowlevel_init.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_CLOCK 200
+
+#if MASTER_CLOCK == 200
+#define MASTER_PLL_MUL 162
+#define MASTER_PLL_DIV 15
+#elif MASTER_CLOCK == 239
+#define MASTER_PLL_MUL 13
+#define MASTER_PLL_DIV 1
+#endif
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+ /* Disable Watchdog */
+ cfg->wdt_mr =
+ AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+ AT91_WDT_WDV |
+ AT91_WDT_WDDIS |
+ AT91_WDT_WDD;
+
+ /* define PDC[31:16] as DATA[31:16] */
+ cfg->ebi_pio_pdr = 0xFFFF0000;
+ /* no pull-up for D[31:16] */
+ cfg->ebi_pio_ppudr = 0xFFFF0000;
+ /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+ cfg->ebi_csa =
+ AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC;
+
+ cfg->smc_cs = 3;
+ cfg->smc_mode =
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_DBW_8 |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_TDF_(2);
+ cfg->smc_cycle =
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5);
+ cfg->smc_pulse =
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3);
+ cfg->smc_setup =
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0);
+
+ cfg->pmc_mor =
+ AT91_PMC_MOSCEN |
+ (255 << 8); /* Main Oscillator Start-up Time */
+ cfg->pmc_pllar =
+ AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+ AT91_PMC_OUT |
+ ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+ /* PCK/2 = MCK Master Clock from PLLA */
+ cfg->pmc_mckr1 =
+ AT91_PMC_CSS_SLOW |
+ AT91_PMC_PRES_1 |
+ AT91SAM9_PMC_MDIV_2 |
+ AT91_PMC_PDIV_1;
+ /* PCK/2 = MCK Master Clock from PLLA */
+ cfg->pmc_mckr2 =
+ AT91_PMC_CSS_PLLA |
+ AT91_PMC_PRES_1 |
+ AT91SAM9_PMC_MDIV_2 |
+ AT91_PMC_PDIV_1;
+
+ /* SDRAM */
+ /* SDRAMC_TR - Refresh Timer register */
+ cfg->sdrc_tr1 = 0x13C;
+ /* SDRAMC_CR - Configuration register*/
+ cfg->sdrc_cr =
+ AT91_SDRAMC_NC_9 |
+ AT91_SDRAMC_NR_13 |
+ AT91_SDRAMC_NB_4 |
+ AT91_SDRAMC_CAS_2 |
+ AT91_SDRAMC_DBW_32 |
+ (2 << 8) | /* Write Recovery Delay */
+ (7 << 12) | /* Row Cycle Delay */
+ (2 << 16) | /* Row Precharge Delay */
+ (2 << 20) | /* Row to Column Delay */
+ (5 << 24) | /* Active to Precharge Delay */
+ (8 << 28); /* Exit Self Refresh to Active Delay */
+
+ /* Memory Device Register -> SDRAM */
+ cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+ /* SDRAM_TR */
+ cfg->sdrc_tr2 = (MASTER_CLOCK * 7);
+
+ /* user reset enable */
+ cfg->rstc_rmr =
+ AT91_RSTC_KEY |
+ AT91_RSTC_PROCRST |
+ AT91_RSTC_RSTTYP_WAKEUP |
+ AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/boards/cpodc2/msp430.c b/arch/arm/boards/cpodc2/msp430.c
new file mode 100644
index 0000000..1c46528
--- /dev/null
+++ b/arch/arm/boards/cpodc2/msp430.c
@@ -0,0 +1,513 @@
+/*
+ * (C) Copyright 2013
+ * Darren Garnier <dgarnier@reinrag.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+//#define DEBUG 1
+
+#include <common.h>
+#include <environment.h>
+#include <getopt.h>
+#include <errno.h>
+#include <crc.h>
+#include <clock.h>
+#include <console.h>
+#include <stdio.h>
+#include <string.h>
+#include <fcntl.h>
+#include <fs.h>
+#include <kfifo.h>
+#include <xfuncs.h>
+#include <command.h>
+#include <complete.h>
+
+#include "msp430.h"
+
+/* some info from protocol.h */
+#define kCmdResetSoft "$0100*\r\n"
+#define kCmdDeviceInfo "$07*\r\n"
+#define kCmdSerialNumber "$0E0000*\r\n"
+#define kCmdBacklightOn "$0C00FF01*\r\n"
+#define kCmdBacklightOff "$0C00FF00*\r\n"
+
+enum DCResponses {
+ kRspStatus = 0x00,
+ kRspDevice = 0x03,
+ kRspBacklight = 0x09,
+ kRspSerialNumber = 0x0A,
+};
+
+typedef uint8_t _uint8;
+typedef uint16_t _uint16;
+typedef uint32_t _uint32;
+typedef int8_t _int8;
+typedef int16_t _int16;
+typedef int32_t _int32;
+typedef float _float32;
+
+#ifndef PACK
+#define PACK __attribute__((packed))
+#endif
+
+struct sRspDevice {
+ _uint8 rsp; // = kRspDevice
+ _uint8 boardType; // enum eBoardTypeID
+ _uint8 freqUnits; // tFreqData is Hz << freqUnits
+ _uint8 pluggedCutoff; // in Hz
+ _uint16 fwVersionMajor;
+ _uint16 fwVersionMinor;
+ _uint32 serialNumber;
+ _float32 ticsPerSec; // time ticks/second
+ _uint16 intervalDataQLen; // length of DC interval data queue
+ _uint16 meterDataQLen; // length of DC meter data queue
+ _float32 scaleA1; // analog cals
+ _float32 scaleA2;
+ _int16 offsetA1;
+ _int16 offsetA2;
+ _uint32 statusRate; // ticks period
+ _int16 resistorA1; // pullup on A1 connector pin 3
+ _int16 resistorA2; // A2
+ _float32 vX2; // what we're pulling up with (~5V)
+ _uint16 temperature;
+ _uint16 vccHalf;
+ _float32 scaleA1H; // analog HiRes cals
+ _float32 scaleA2H;
+ _int16 offsetA1H;
+ _int16 offsetA2H;
+} PACK; // 60
+
+struct sRspBacklight {
+ _uint8 rsp;
+ _uint8 cmd;
+ union {
+ _uint16 value;
+ struct {
+ _uint8 current; // value to set the current when on
+ _uint8 on; // on or off
+ } PACK settings;
+ } PACK backlight;
+} PACK; // 4
+
+struct sRspSerialNumber {
+ _uint8 rsp; // kRspSerialNumber
+ char pad[3];
+ _uint32 sn;
+ char fullSN[];
+} PACK;
+
+// raw data
+struct sRspRaw {
+ _uint8 rsp; // = ?
+ _uint8 raw[63];
+} PACK; // 64
+
+#define FULLSNLENGTH 20
+#define INPUT_FIFO_SIZE 512
+#define TIMEOUT_FLUSH 100 * MSECOND
+#define TIMEOUT_RESPONSE 200 * MSECOND
+
+struct msp430_device {
+ struct console_device * cdev;
+ struct kfifo * fifo;
+ unsigned char fullSN[FULLSNLENGTH];
+ uint8_t boardtype;
+ uint16_t major;
+ uint16_t minor;
+ uint8_t bl_current;
+ uint8_t bl_on;
+};
+
+static struct msp430_device *g_msp = NULL;
+
+static int input_fifo_fill(struct console_device *cdev, struct kfifo *fifo)
+{
+ while (cdev->tstc(cdev) && (kfifo_len(fifo) < INPUT_FIFO_SIZE))
+ kfifo_putc(fifo, (unsigned char)(cdev->getc(cdev)));
+ return kfifo_len(fifo);
+}
+
+// get line ending in \n or \r
+static int msp_getline(struct msp430_device *msp,
+ unsigned char *buf, int len, uint64_t timeout)
+{
+ int i;
+ unsigned char c;
+ uint64_t start = get_time_ns();
+
+ for (i = 0; i < len-1; ) {
+ if (is_timeout(start, timeout)) {
+ i = -ETIMEDOUT;
+ break;
+ }
+ if (input_fifo_fill(msp->cdev, msp->fifo)) {
+ kfifo_getc(msp->fifo, &c);
+ buf[i++] = c;
+ if (c == '\n' || c == '\r') {
+ if (--i) break;
+ }
+ }
+ }
+ buf[i]='\0';
+
+ return i;
+}
+
+static void msp_puts(struct msp430_device *msp, const unsigned char *s)
+{
+ // check for characters coming in while sending them out....
+ unsigned char c;
+ while((c = *s++)) {
+ input_fifo_fill(msp->cdev, msp->fifo);
+ msp->cdev->putc(msp->cdev, c);
+ }
+}
+
+static void msp_flush(struct msp430_device *msp)
+{
+ uint64_t start;
+ struct console_device *cdev = msp->cdev;
+
+ start = get_time_ns();
+ while (cdev->tstc(cdev) &&
+ !is_timeout(start, TIMEOUT_FLUSH))
+ cdev->getc(cdev);
+ kfifo_reset(msp->fifo);
+}
+
+static struct console_device *get_console_from_device_name(const char *dname)
+{
+ struct console_device *cdev;
+ const char *target;
+
+ for_each_console(cdev) {
+ // lookup by device driver, not by console number
+ // so we can be sure to get the atmel serial port
+ target = dev_id(cdev->dev);
+ if (!strcmp(dname, target))
+ return cdev;
+ }
+ return NULL;
+}
+
+int __init cpodc2_msp430_init_console(const char *dname)
+{
+ struct console_device *cdev;
+
+ cdev = get_console_from_device_name(dname);
+ if (cdev == NULL) return -1;
+
+ // deactivate the console in case it was activated...
+ dev_set_param(&cdev->class_dev, "active", "");
+ // now that we turned it off.. we can "print" again..
+
+ // lets set the baud rate ... (defaults already to 8-N-1)
+ cdev->setbrg(cdev,38400);
+ dev_set_param(&cdev->class_dev, "baudrate", "38400");
+
+ g_msp = xzalloc(sizeof(struct msp430_device));
+
+ g_msp->cdev = cdev; // keep the pointer
+ g_msp->fifo = kfifo_alloc(INPUT_FIFO_SIZE);
+
+ // let init script do a reset...
+ // msp_reset(g_msp);
+
+ return 0;
+}
+
+
+static int unwrap_response(char *buff, char *resp)
+{
+ char *b, *bend, *rend, *u, i;
+ int complete=0;
+
+ bend = buff + INPUT_FIFO_SIZE;
+ rend = resp + sizeof(struct sRspRaw);
+
+ u = resp; b = buff;
+
+ /* search for beginning of packet */
+ while(*b != 0) {
+ if (*b == '$') {
+ pr_debug("> $");
+ if (++b == bend) b=buff;
+ break;
+ }
+ if (++b == bend) b=buff; /* eat all before $ */
+ }
+
+ /* packet is begun, maybe */
+ while( *b != 0 ) {
+ if (*b >= '0' && *b <= '9') {
+ i = *b - '0';
+ } else if (*b >= 'A' && *b <= 'F') {
+ i = *b - 'A' + 10;
+ } else if (*b == '*') {
+ complete=1;
+ if (++b == bend) b = buff; /* circular buffer */
+ pr_debug("*\n");
+ break;
+ } else {
+ pr_debug("\n unexpected char %c\n ", *b);
+ if (++b == bend) b = buff; // skip it
+ break;
+ }
+ if (u == rend) {
+ pr_debug("Unwrap would overrun!\n");
+ break;
+ }
+ i=i<<4;
+ if (++b == bend) b = buff; /* circular buffer */
+ if (*b >= '0' && *b <= '9') {
+ i += *b - '0';
+ } else if (*b >= 'A' && *b <= 'F') {
+ i += *b - 'A' + 10;
+ } else if (*b == 0) {
+ /* back up */
+ if (b == buff) {
+ b = bend -1;
+ } else b--;
+ break;
+ } else {
+ pr_debug("unexpected char %c", *b);
+ if (++b == bend) b = buff; // skip it
+ break;
+ }
+ pr_debug("%02X",i);
+ *u++ = i;
+
+ if (++b == bend) b = buff; /* circular buffer */
+ }
+
+ return complete;
+}
+
+static int msp_wait_parse_response(struct msp430_device *msp)
+{
+ unsigned char line[INPUT_FIFO_SIZE];
+ int len;
+ struct sRspRaw rsp;
+ struct sRspDevice *rd = (struct sRspDevice *) &rsp;
+ struct sRspBacklight *bl = (struct sRspBacklight *) &rsp;
+
+ len = msp_getline(msp, line, INPUT_FIFO_SIZE, TIMEOUT_RESPONSE);
+ if (len == 0) {
+ pr_debug(" 0 length line.\n");
+ return -1;
+ }
+ if (len < 0)
+ return len;
+
+ pr_debug("Got a response:\n< %s\n",line);
+
+ if (unwrap_response(line, (char *) &rsp)) {
+ // got a response...
+ switch (rsp.rsp) {
+ case kRspStatus:
+ pr_debug("got MSP status packet.\n");
+ break;
+ case kRspDevice:
+ pr_debug("got device response.\n");
+ msp->major= rd->fwVersionMajor;
+ msp->minor= rd->fwVersionMinor;
+ msp->boardtype = rd->boardType;
+ break;
+ case kRspBacklight:
+ pr_debug("got backlight response.\n");
+ msp->bl_current = bl->backlight.settings.current;
+ msp->bl_on = bl->backlight.settings.on;
+ break;
+ case kRspSerialNumber:
+ pr_debug("got serial number response.\n");
+ strlcpy(msp->fullSN, ((struct sRspSerialNumber *)&rsp)->fullSN, FULLSNLENGTH);
+ break;
+ default:
+ pr_warning("unexpected msp response (0x%02x)\n", rsp.rsp);
+ }
+ } else {
+ pr_err("Couldn't parse: %s\n", line);
+ return -1;
+ }
+
+ return rsp.rsp;
+}
+
+static int msp430_read_device(struct msp430_device *msp)
+{
+ int try, rsp;
+
+ for (try=0; try<3; try++) {
+
+ msp_puts(msp, kCmdDeviceInfo);
+
+ do {
+ rsp = msp_wait_parse_response(msp);
+ if (rsp == kRspDevice) {
+ pr_debug("got device bt = %02x, fw = %02d.%02d\n", msp->boardtype, msp->major, msp->minor);
+ return 0;
+ }
+ } while (rsp != -ETIMEDOUT);
+
+ // timed out.. perhaps needs a "flush"
+ msp_flush(msp);
+ }
+ return rsp;
+}
+
+static int msp430_read_serial(struct msp430_device *msp)
+{
+ int try, rsp;
+
+ for (try=0; try<3; try++) {
+
+ msp_puts(msp, kCmdSerialNumber);
+
+ do {
+ rsp = msp_wait_parse_response(msp);
+ if (rsp == kRspSerialNumber) {
+ pr_debug("got the serial number %s\n",msp->fullSN);
+ return 0;
+ }
+ } while (rsp != -ETIMEDOUT);
+ msp_flush(msp);
+ }
+ return rsp;
+}
+
+static int msp430_backlight(struct msp430_device *msp, int on)
+{
+ int ret;
+ if (on) {
+ msp_puts(msp, kCmdBacklightOn);
+ } else {
+ msp_puts(msp, kCmdBacklightOff);
+ }
+ ret = msp_wait_parse_response(msp);
+ if (ret > 0) return 0;
+ return ret;
+}
+
+static int msp430_reset(struct msp430_device *msp)
+{
+ msp_puts(msp,kCmdResetSoft);
+
+#ifdef DEBUG
+ if (kfifo_len(msp->fifo)) {
+ unsigned char c;
+ int i;
+ pr_debug("%d characters in buffer after reset: ", kfifo_len(msp->fifo));
+ i = 40;
+ while ( (kfifo_getc(msp->fifo, &c)==0) && (i--) )
+ pr_debug("%c",c);
+ pr_debug("\n");
+ }
+#endif
+ msp_flush(msp);
+ return 0;
+}
+
+static int do_msp430(int argc, char *argv[])
+{
+ int opt, ret = 0, info = 0;
+
+ if (!g_msp) return -EINVAL;
+
+ while ((opt = getopt(argc, argv, "irb:M:m:S:T:")) > 0)
+ switch (opt) {
+ case 'r':
+ if ((ret = msp430_reset(g_msp)))
+ return ret;
+ break;
+ case 'b':
+ if (strcmp(optarg, "on") == 0) {
+ msp430_backlight(g_msp, 1);
+ } else
+ if (strcmp(optarg, "off") == 0) {
+ msp430_backlight(g_msp, 0);
+ }
+ break;
+ case 'i':
+ info=1;
+ break;
+ case 'M':
+ case 'm':
+ case 'T':
+ if (!g_msp->major) {
+ if ((ret = msp430_read_device(g_msp)))
+ break;
+ }
+ if (optarg) {
+ if (opt == 'M')
+ export_env_ull(optarg, g_msp->major);
+ else if (opt == 'm')
+ export_env_ull(optarg, g_msp->minor);
+ else
+ export_env_ull(optarg, g_msp->boardtype);
+ }
+ break;
+ case 'S':
+ if (g_msp->fullSN[0] == '\0') {
+ if ((ret = msp430_read_serial(g_msp)))
+ break;
+ }
+ setenv(optarg,g_msp->fullSN);
+ break;
+ default:
+ pr_err("unexpected option 0x%02x (%c)\n", opt,opt);
+ return -EINVAL;
+ }
+
+ if (info) {
+ printf("MSP430 MCU:");
+ if (g_msp->major) {
+ printf(" Boardtype: 0x%02X,", g_msp->boardtype);
+ printf(" Firmware : %d.%02d,", g_msp->major, g_msp->minor);
+ }
+ if (g_msp->fullSN[0]) {
+ printf(" Serial # : %s", g_msp->fullSN);
+ }
+ printf("\n");
+ }
+
+ return ret;
+}
+
+BAREBOX_CMD_HELP_START(msp430)
+BAREBOX_CMD_HELP_USAGE("msp430 [OPTIONS]\n")
+BAREBOX_CMD_HELP_SHORT("Communicate with MSP430 MCU.\n")
+BAREBOX_CMD_HELP_OPT ("-r ", "Do a soft reset of the controller\n")
+BAREBOX_CMD_HELP_OPT ("-b [on, off]", "Control backlight\n")
+BAREBOX_CMD_HELP_OPT ("-M MAJOR ", "Read Major FW version and store into $MAJOR\n")
+BAREBOX_CMD_HELP_OPT ("-m MINOR ", "Read Minor FW version and store into $MINOR\n")
+BAREBOX_CMD_HELP_OPT ("-S SERIAL ", "Read Serial Number and store into $SERIAL\n")
+BAREBOX_CMD_HELP_OPT ("-T TYPE ", "Read board type and store into $TYPE\n")
+BAREBOX_CMD_HELP_OPT ("-i ", "Print info about board.\n")
+
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(msp430)
+ .cmd = do_msp430,
+ .usage = "Communicate with MSP430 MCU.",
+ BAREBOX_CMD_HELP(cmd_msp430_help)
+ BAREBOX_CMD_COMPLETE(empty_complete)
+BAREBOX_CMD_END
+
+
+
+
+
diff --git a/arch/arm/boards/cpodc2/msp430.h b/arch/arm/boards/cpodc2/msp430.h
new file mode 100644
index 0000000..3573e30
--- /dev/null
+++ b/arch/arm/boards/cpodc2/msp430.h
@@ -0,0 +1,23 @@
+/*
+ * (C) Copyright 2013
+ * Darren Garnier <dgarnier@reinrag.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+int cpodc2_msp430_init_console(const char *dname);
+
diff --git a/arch/arm/configs/cpodc2_defconfig b/arch/arm/configs/cpodc2_defconfig
new file mode 100644
index 0000000..092ef63
--- /dev/null
+++ b/arch/arm/configs/cpodc2_defconfig
@@ -0,0 +1,96 @@
+CONFIG_ARCH_AT91SAM9261=y
+CONFIG_MACH_CPODC2_9261=y
+CONFIG_MACH_CPODC2=y
+CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+# CONFIG_AT91SAM9_LOWLEVEL_INIT is not set
+CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_BOARD_APPEND_ATAG=y
+CONFIG_CPODC2_MSP430=y
+CONFIG_MMU=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x39C00
+CONFIG_PBL_IMAGE=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_MALLOC_TLSF=y
+CONFIG_PROMPT="CPODC_2.0:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_MENU is not set
+# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+CONFIG_CONSOLE_ACTIVATE_ALL=y
+CONFIG_DEFAULT_ENVIRONMENT=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/cpodc2/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+# CONFIG_CMD_MENU is not set
+# CONFIG_CMD_PASSWD=y
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MAGICVAR=y
+# CONFIG_CMD_LED is not set
+# CONFIG_CMD_LED_TRIGGER is not set
+# CONFIG_NET is not set
+# CONFIG_NET_DHCP is not set
+# CONFIG_NET_NFS is not set
+# CONFIG_NET_PING is not set
+# CONFIG_NET_TFTP is not set
+# CONFIG_NET_TFTP_PUSH is not set
+# CONFIG_NET_RESOLV is not set
+# CONFIG_DRIVER_NET_DM9K is not set
+CONFIG_SPI=y
+CONFIG_DRIVER_SPI_ATMEL=y
+CONFIG_CMD_SPI=y
+CONFIG_MTD=y
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+CONFIG_NAND_ATMEL=y
+# CONFIG_UBI is not set
+# CONFIG_CMD_UBIFORMAT is not set
+CONFIG_USB=y
+# CONFIG_USB_OHCI is not set
+# CONFIG_USB_OHCI_AT91 is not set
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HAVE_GADGET_DRIVER=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_GADGET_DRIVER_AT91=y
+CONFIG_USB_GADGET_DFU=y
+CONFIG_USB_GADGET_SERIAL=y
+# CONFIG_LED=y
+# CONFIG_LED_GPIO=y
+# CONFIG_LED_TRIGGERS=y
+# CONFIG_KEYBOARD_GPIO=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_VIDEO=y
+CONFIG_DRIVER_VIDEO_ATMEL=y
+CONFIG_CMD_SPLASH=y
+CONFIG_PNG=y
+CONFIG_LODEPNG=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5fb3ead..2701a98 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -271,6 +271,11 @@ config MACH_AT91SAM9261EK
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+config MACH_CPODC2_9261
+ bool "CPO Science DataCollector II v2.0"
+ select MACH_CPODC2
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
+
config MACH_PM9261
bool "Ronetix PM9261"
select HAS_DM9000
@@ -297,12 +302,27 @@ config MACH_AT91SAM9G10EK
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+config MACH_CPODC2_9G10
+ bool "CPO Science DataCollector II v2.1"
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select MACH_CPODC2
+
endchoice
endif
# ----------------------------------------------------------
+if SOC_AT91SAM9261
+
+config MACH_CPODC2
+ bool
+ depends on MACH_CPODC2_9261 || MACH_CPODC2_9G10
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91SAM9G20
choice
@@ -525,6 +545,10 @@ config CALAO_MB_QIL_A9260
bool "MB-QIL A9260 Motherboard Board support"
depends on MACH_QIL_A9260 || MACH_QIL_A9G20
+config CPODC2_MSP430
+ bool "CPODC2 MSP430 controller support"
+ depends on MACH_CPODC2
+
if COMMAND_SUPPORT
config CMD_AT91MUX
--
1.8.3.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-09-03 2:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-03 2:22 Darren Garnier [this message]
2013-09-03 11:38 ` Jean-Christophe PLAGNIOL-VILLARD
2013-09-03 15:06 ` Darren Garnier
2013-09-03 15:29 ` Jean-Christophe PLAGNIOL-VILLARD
2013-09-04 7:25 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58FB74C2-85EF-43A1-A491-D78CF5DA585E@reinrag.net \
--to=dgarnier@reinrag.net \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox