mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
	Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 2/3] phy: rockchip: add pcie3 phy driver
Date: Wed, 3 Apr 2024 10:26:48 +0200	[thread overview]
Message-ID: <6172e753-5de0-41f8-a38a-1e96abc8b698@pengutronix.de> (raw)
In-Reply-To: <20240403080703.4098404-2-s.hauer@pengutronix.de>

Hello Sascha,

On 03.04.24 10:07, Sascha Hauer wrote:
> This adds support for the Rockchip PCIe3 phy found on RK35x8 SoCs. The
> code is taken from Linux as of Linux-6.9-rc2.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Should we update the defconfigs?

Cheers,
Ahmad

> ---
>  drivers/phy/rockchip/Kconfig                  |   5 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 317 ++++++++++++++++++
>  3 files changed, 323 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index e6cee372e7..8a10190f8e 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -13,3 +13,8 @@ config PHY_ROCKCHIP_NANENG_COMBO_PHY
>  	  Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII
>  	  combo PHY with NaNeng IP block.
>  
> +config PHY_ROCKCHIP_SNPS_PCIE3
> +	bool "Rockchip Snps PCIe3 PHY Driver"
> +	depends on ARCH_ROCKCHIP || COMPILE_TEST
> +	help
> +	  Enable this to support the Rockchip snps PCIe3 PHY.
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index 51ebf06aa1..1eaee4cbee 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -1,3 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
>  obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY) += phy-rockchip-naneng-combphy.o
> +obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3) += phy-rockchip-snps-pcie3.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> new file mode 100644
> index 0000000000..7f39b261ca
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PCIE3.0 phy driver
> + *
> + * Copyright (C) 2022 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <of.h>
> +#include <common.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +//#include <linux/phy/pcie.h>
> +#include <mfd/syscon.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +/* Register for RK3568 */
> +#define GRF_PCIE30PHY_CON1			0x4
> +#define GRF_PCIE30PHY_CON6			0x18
> +#define GRF_PCIE30PHY_CON9			0x24
> +#define GRF_PCIE30PHY_DA_OCM			(BIT(15) | BIT(31))
> +#define GRF_PCIE30PHY_STATUS0			0x80
> +#define GRF_PCIE30PHY_WR_EN			(0xf << 16)
> +#define SRAM_INIT_DONE(reg)			(reg & BIT(14))
> +
> +#define RK3568_BIFURCATION_LANE_0_1		BIT(0)
> +
> +/* Register for RK3588 */
> +#define PHP_GRF_PCIESEL_CON			0x100
> +#define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
> +#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
> +#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
> +#define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
> +
> +#define RK3588_BIFURCATION_LANE_0_1		BIT(0)
> +#define RK3588_BIFURCATION_LANE_2_3		BIT(1)
> +#define RK3588_LANE_AGGREGATION		BIT(2)
> +
> +struct rockchip_p3phy_ops;
> +
> +struct rockchip_p3phy_priv {
> +	const struct rockchip_p3phy_ops *ops;
> +	void __iomem *mmio;
> +	/* mode: RC, EP */
> +	int mode;
> +	/* pcie30_phymode: Aggregation, Bifurcation */
> +	int pcie30_phymode;
> +	struct regmap *phy_grf;
> +	struct regmap *pipe_grf;
> +	struct reset_control *p30phy;
> +	struct phy *phy;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	int num_lanes;
> +	u32 lanes[4];
> +};
> +
> +struct rockchip_p3phy_ops {
> +	int (*phy_init)(struct rockchip_p3phy_priv *priv);
> +};
> +
> +static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	return 0;
> +}
> +
> +static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
> +{
> +	struct phy *phy = priv->phy;
> +	bool bifurcation = false;
> +	int ret;
> +	u32 reg;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, GRF_PCIE30PHY_DA_OCM);
> +
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
> +		if (priv->lanes[i] > 1)
> +			bifurcation = true;
> +	}
> +
> +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> +	if (bifurcation) {
> +		dev_info(&phy->dev, "bifurcation enabled\n");
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     GRF_PCIE30PHY_WR_EN | RK3568_BIFURCATION_LANE_0_1);
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> +			     GRF_PCIE30PHY_DA_OCM);
> +	} else {
> +		dev_dbg(&phy->dev, "bifurcation disabled\n");
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     GRF_PCIE30PHY_WR_EN & ~RK3568_BIFURCATION_LANE_0_1);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       GRF_PCIE30PHY_STATUS0,
> +				       reg, SRAM_INIT_DONE(reg),
> +				       500);
> +	if (ret)
> +		dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);
> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3568_ops = {
> +	.phy_init = rockchip_p3phy_rk3568_init,
> +};
> +
> +static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
> +{
> +	u32 reg = 0;
> +	u8 mode = 0;
> +	int ret;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
> +
> +	/* Set bifurcation if needed */
> +	for (int i = 0; i < priv->num_lanes; i++) {
> +		if (!priv->lanes[i])
> +			mode |= (BIT(i) << 3);
> +
> +		if (priv->lanes[i] > 1)
> +			mode |= (BIT(i) >> 1);
> +	}
> +
> +	if (!mode)
> +		reg = RK3588_LANE_AGGREGATION;
> +	else {
> +		if (mode & (BIT(0) | BIT(1)))
> +			reg |= RK3588_BIFURCATION_LANE_0_1;
> +
> +		if (mode & (BIT(2) | BIT(3)))
> +			reg |= RK3588_BIFURCATION_LANE_2_3;
> +	}
> +
> +	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
> +
> +	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
> +	if (!IS_ERR(priv->pipe_grf)) {
> +		reg = (mode & (BIT(6) | BIT(7))) >> 6;
> +		if (reg)
> +			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
> +				     (reg << 16) | reg);
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
> +				       reg, RK3588_SRAM_INIT_DONE(reg),
> +				       500);
> +	ret |= regmap_read_poll_timeout(priv->phy_grf,
> +					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
> +					reg, RK3588_SRAM_INIT_DONE(reg),
> +					500);
> +	if (ret)
> +		dev_err(&priv->phy->dev, "lock failed 0x%x, check input refclk and power supply\n",
> +			reg);
> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3588_ops = {
> +	.phy_init = rockchip_p3phy_rk3588_init,
> +};
> +
> +static int rochchip_p3phy_init(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		dev_err(&priv->phy->dev, "failed to enable PCIe bulk clks %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_assert(priv->p30phy);
> +	udelay(1);
> +
> +	if (priv->ops->phy_init) {
> +		ret = priv->ops->phy_init(priv);
> +		if (ret)
> +			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rochchip_p3phy_exit(struct phy *phy)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	reset_control_assert(priv->p30phy);
> +	return 0;
> +}
> +
> +static const struct phy_ops rochchip_p3phy_ops = {
> +	.init = rochchip_p3phy_init,
> +	.exit = rochchip_p3phy_exit,
> +	.set_mode = rockchip_p3phy_set_mode,
> +};
> +
> +static struct phy *rockchip_p3phy_xlate(struct device *dev,
> +					struct of_phandle_args *args)
> +{
> +	struct rockchip_p3phy_priv *priv = dev->priv;
> +
> +	return priv->phy;
> +}
> +
> +static int rockchip_p3phy_probe(struct device *dev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct rockchip_p3phy_priv *priv;
> +	struct device_node *np = dev->of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	priv = xzalloc(sizeof(*priv));
> +
> +	res = dev_request_mem_resource(dev, 0);
> +	if (IS_ERR(res)) {
> +		ret = PTR_ERR(res);
> +		return ret;
> +	}
> +
> +	priv->mmio = IOMEM(res->start);
> +	if (IS_ERR(priv->mmio)) {
> +		ret = PTR_ERR(priv->mmio);
> +		return ret;
> +	}
> +
> +	priv->ops = device_get_match_data(dev);
> +	if (!priv->ops) {
> +		dev_err(dev, "no of match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
> +	if (IS_ERR(priv->phy_grf)) {
> +		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
> +		return PTR_ERR(priv->phy_grf);
> +	}
> +
> +	if (of_device_is_compatible(np, "rockchip,rk3588-pcie3-phy")) {
> +		priv->pipe_grf =
> +			syscon_regmap_lookup_by_phandle(dev->of_node,
> +							"rockchip,pipe-grf");
> +		if (IS_ERR(priv->pipe_grf))
> +			dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
> +	} else {
> +		priv->pipe_grf = NULL;
> +	}
> +
> +	priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
> +							     priv->lanes, 2,
> +							     ARRAY_SIZE(priv->lanes));
> +
> +	/* if no data-lanes assume aggregation */
> +	if (priv->num_lanes == -EINVAL) {
> +		dev_dbg(dev, "no data-lanes property found\n");
> +		priv->num_lanes = 1;
> +		priv->lanes[0] = 1;
> +	} else if (priv->num_lanes < 0) {
> +		dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
> +		return priv->num_lanes;
> +	}
> +
> +	priv->phy = phy_create(dev, NULL, &rochchip_p3phy_ops);
> +	if (IS_ERR(priv->phy)) {
> +		dev_err(dev, "failed to create combphy\n");
> +		return PTR_ERR(priv->phy);
> +	}
> +
> +	priv->p30phy = reset_control_get_optional(dev, "phy");
> +	if (IS_ERR(priv->p30phy)) {
> +		return dev_err_probe(dev, PTR_ERR(priv->p30phy),
> +				     "failed to get phy reset control\n");
> +	}
> +	if (!priv->p30phy)
> +		dev_info(dev, "no phy reset control specified\n");
> +
> +	priv->num_clks = clk_bulk_get_all(dev, &priv->clks);
> +	if (priv->num_clks < 1)
> +		return -ENODEV;
> +
> +	dev->priv = priv;
> +	phy_set_drvdata(priv->phy, priv);
> +	phy_provider = of_phy_provider_register(dev, rockchip_p3phy_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id rockchip_p3phy_of_match[] = {
> +	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
> +	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
> +
> +static struct driver rockchip_p3phy_driver = {
> +	.probe	= rockchip_p3phy_probe,
> +	.name = "rockchip-snps-pcie3-phy",
> +	.of_compatible = rockchip_p3phy_of_match,
> +};
> +coredevice_platform_driver(rockchip_p3phy_driver);
> +
> +MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
> +MODULE_LICENSE("GPL");

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




  reply	other threads:[~2024-04-03  8:27 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-03  8:07 [PATCH 1/3] of: add of_property_read_variable_uxx_array() Sascha Hauer
2024-04-03  8:07 ` [PATCH 2/3] phy: rockchip: add pcie3 phy driver Sascha Hauer
2024-04-03  8:26   ` Ahmad Fatoum [this message]
2024-04-03 12:15     ` Sascha Hauer
2024-04-03  8:07 ` [PATCH 3/3] pci: ignore BAR when it doesn't fit into bus resource Sascha Hauer
2024-04-04  6:36 ` [PATCH 1/3] of: add of_property_read_variable_uxx_array() Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6172e753-5de0-41f8-a38a-1e96abc8b698@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox