From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: "Alvin Šipraga" <alvin@pqrs.dk>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Cc: "Vladimir Oltean" <olteanv@gmail.com>,
"Luiz Angelo Daros de Luca" <luizluca@gmail.com>,
"Alvin Šipraga" <alsi@bang-olufsen.dk>
Subject: Re: [PATCH 1/4] net: fec_imx: reverse registration order of mdiobus and edev
Date: Sun, 24 Dec 2023 10:27:04 +0100 [thread overview]
Message-ID: <65e626eb-dc07-41fb-8f51-a7f307e5e360@pengutronix.de> (raw)
In-Reply-To: <20231222-realtek-mdio-fix-v1-1-6bbf80d6a756@bang-olufsen.dk>
Hello Alvin,
On 22.12.23 03:07, Alvin Šipraga wrote:
> From: Alvin Šipraga <alsi@bang-olufsen.dk>
>
> This is necessary so that on systems with MDIO-connected Etheret
> switches, DSA can find the master edev during switch registration.
> Otherwise the switch setup will fail.
On the other hand, systems, where the PHY supplies a clock to the MAC
need the MDIO bus controller to be registered first, so the PHYs can
probe. In the special case of the FEC driver:
- there's no struct eth_device::init function
- struct eth_device::get_ethaddr doesn't do hardware access
and operations in struct eth_device are only invoked when ->open is initially
called, which won't happen at driver probe time.
I thus think the change is ok, even if not generally applicable to all drivers.
Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Thanks,
Ahmad
>
> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
> ---
> drivers/net/fec_imx.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
> index 203a2a8aa191..75a65962820b 100644
> --- a/drivers/net/fec_imx.c
> +++ b/drivers/net/fec_imx.c
> @@ -895,18 +895,18 @@ static int fec_probe(struct device *dev)
> fec->miibus.priv = fec;
> fec->miibus.parent = dev;
>
> - ret = mdiobus_register(&fec->miibus);
> + ret = eth_register(edev);
> if (ret)
> goto free_receive_packets;
>
> - ret = eth_register(edev);
> + ret = mdiobus_register(&fec->miibus);
> if (ret)
> - goto unregister_mdio;
> + goto unregister_eth;
>
> return 0;
>
> -unregister_mdio:
> - mdiobus_unregister(&fec->miibus);
> +unregister_eth:
> + eth_unregister(edev);
> free_receive_packets:
> fec_free_receive_packets(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE);
> free_xbd:
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-12-24 9:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-22 2:07 [PATCH 0/4] fix barebox support for MDIO-connected Realtek Ethernet switches Alvin Šipraga
2023-12-22 2:07 ` [PATCH 1/4] net: fec_imx: reverse registration order of mdiobus and edev Alvin Šipraga
2023-12-24 9:27 ` Ahmad Fatoum [this message]
2023-12-22 2:07 ` [PATCH 2/4] net: dsa: realtek: fix support for MDIO-connected switches Alvin Šipraga
2023-12-22 2:07 ` [PATCH 3/4] net: dsa: realtek: unify ds_ops Alvin Šipraga
2023-12-22 2:07 ` [PATCH 4/4] net: mdio_bus: associate OF nodes with their devices Alvin Šipraga
2024-01-02 9:01 ` [PATCH 0/4] fix barebox support for MDIO-connected Realtek Ethernet switches Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=65e626eb-dc07-41fb-8f51-a7f307e5e360@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=alsi@bang-olufsen.dk \
--cc=alvin@pqrs.dk \
--cc=barebox@lists.infradead.org \
--cc=luizluca@gmail.com \
--cc=olteanv@gmail.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox