mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>, barebox@lists.infradead.org
Subject: Re: [PATCH 5/9] spi: add litex spiflash driver
Date: Wed, 5 May 2021 12:39:14 +0200	[thread overview]
Message-ID: <6afef336-25fc-9b4f-eb4c-8e99f7b118ac@pengutronix.de> (raw)
In-Reply-To: <20210505100900.88141-6-antonynpavlov@gmail.com>

Hello Antony,

On 05.05.21 12:08, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
>  drivers/spi/Kconfig          |   3 +
>  drivers/spi/Makefile         |   1 +
>  drivers/spi/litex_spiflash.c | 242 +++++++++++++++++++++++++++++++++++
>  3 files changed, 246 insertions(+)
> 
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 323d93efeb..714d30e909 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -74,6 +74,9 @@ config DRIVER_SPI_IMX_2_3
>  	depends on ARCH_IMX50 || ARCH_IMX51 || ARCH_IMX53 || ARCH_IMX6 || ARCH_IMX7 || ARCH_IMX8MQ
>  	default y
>  
> +config DRIVER_SPI_LITEX_SPIFLASH
> +	bool "Litex SPIFLASH bitbang master driver"

The SPI controller is called SPIFLASH?

> +
>  config DRIVER_SPI_MXS
>  	bool "i.MX (23,28) SPI Master driver"
>  	depends on ARCH_IMX28
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 908d514a01..ac95ffc1db 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -4,6 +4,7 @@ obj-$(CONFIG_DRIVER_SPI_ATH79) += ath79_spi.o
>  obj-$(CONFIG_DRIVER_SPI_GPIO) += gpio_spi.o
>  obj-$(CONFIG_DRIVER_SPI_FSL_QUADSPI) += spi-fsl-qspi.o
>  obj-$(CONFIG_DRIVER_SPI_IMX) += imx_spi.o
> +obj-$(CONFIG_DRIVER_SPI_LITEX_SPIFLASH) += litex_spiflash.o
>  obj-$(CONFIG_DRIVER_SPI_MVEBU) += mvebu_spi.o
>  obj-$(CONFIG_DRIVER_SPI_MXS) += mxs_spi.o
>  obj-$(CONFIG_DRIVER_SPI_ALTERA) += altera_spi.o
> diff --git a/drivers/spi/litex_spiflash.c b/drivers/spi/litex_spiflash.c
> new file mode 100644
> index 0000000000..2d6858c580
> --- /dev/null
> +++ b/drivers/spi/litex_spiflash.c
> @@ -0,0 +1,242 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2020 Antony Pavlov <antonynpavlov@gmail.com>
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <driver.h>
> +#include <spi/spi.h>
> +#include <io.h>
> +#include <clock.h>

Unused now, I think.

> +
> +struct litex_spiflash_spi {
> +	struct spi_master	master;
> +	void __iomem		*regs;
> +	u32			val;
> +};
> +
> +#define SPIFLASH_BITBANG 0x0
> +#define  SPIFLASH_BB_MOSI BIT(0)
> +#define  SPIFLASH_BB_CLK BIT(1)
> +#define  SPIFLASH_BB_CSN BIT(2)
> +#define  SPIFLASH_BB_DIR BIT(3)
> +
> +#define SPIFLASH_MISO 0x4
> +#define SPIFLASH_BITBANG_EN 0x8
> +
> +static inline u32 litex_spiflash_spi_rr(struct litex_spiflash_spi *sp, int reg)
> +{
> +	return readl(sp->regs + reg);
> +}
> +
> +static inline void litex_spiflash_spi_wr(struct litex_spiflash_spi *sp, u32 val, int reg)
> +{
> +	writel(val, sp->regs + reg);
> +}
> +
> +static inline void setbits(struct litex_spiflash_spi *sp, int bits, int on)
> +{
> +	/*
> +	 * We are the only user of SCSPTR so no locking is required.
> +	 * Reading bit 2 and 0 in SCSPTR gives pin state as input.
> +	 * Writing the same bits sets the output value.
> +	 * This makes regular read-modify-write difficult so we
> +	 * use sp->val to keep track of the latest register value.
> +	 */
> +
> +	if (on)
> +		sp->val |= bits;
> +	else
> +		sp->val &= ~bits;
> +
> +	litex_spiflash_spi_wr(sp, sp->val, SPIFLASH_BITBANG);
> +}
> +
> +static inline struct litex_spiflash_spi *litex_spiflash_spidev_to_sp(struct spi_device *spi)
> +{
> +	return container_of(spi->master, struct litex_spiflash_spi, master);
> +}
> +
> +static inline void setsck(struct spi_device *spi, int on)
> +{
> +	struct litex_spiflash_spi *sc = litex_spiflash_spidev_to_sp(spi);
> +
> +	setbits(sc, SPIFLASH_BB_CLK, on);
> +}
> +
> +static inline void setmosi(struct spi_device *spi, int on)
> +{
> +	struct litex_spiflash_spi *sc = litex_spiflash_spidev_to_sp(spi);
> +
> +	sc->val &= ~SPIFLASH_BB_DIR;
> +	setbits(sc, SPIFLASH_BB_MOSI, on);
> +}
> +
> +static inline u32 getmiso(struct spi_device *spi)
> +{
> +	struct litex_spiflash_spi *sc = litex_spiflash_spidev_to_sp(spi);
> +
> +	setbits(sc, SPIFLASH_BB_DIR, 1);
> +	return !!((litex_spiflash_spi_rr(sc, SPIFLASH_MISO) & 1));
> +}
> +
> +#define spidelay(nsecs) udelay(nsecs/1000)

Unused.

> +
> +#include "spi-bitbang-txrx.h"
> +
> +static inline void litex_spiflash_spi_chipselect(struct litex_spiflash_spi *sc, int on)
> +{
> +	setbits(sc, SPIFLASH_BB_CSN, on);
> +}
> +
> +static int litex_spiflash_spi_setup(struct spi_device *spi)
> +{
> +	struct spi_master *master = spi->master;
> +	struct device_d spi_dev = spi->dev;
> +
> +	if (spi->bits_per_word != 8) {
> +		dev_err(master->dev, "master doesn't support %d bits per word requested by %s\n",
> +			spi->bits_per_word, spi_dev.name);
> +		return -EINVAL;
> +	}
> +
> +	if ((spi->mode & (SPI_CPHA | SPI_CPOL)) != SPI_MODE_0) {
> +		dev_err(master->dev, "master doesn't support SPI_MODE%d requested by %s\n",
> +			spi->mode & (SPI_CPHA | SPI_CPOL), spi_dev.name);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int litex_spiflash_spi_read(struct spi_device *spi, void *buf, size_t nbyte)
> +{
> +	ssize_t cnt = 0;
> +	u8 *rxf_buf = buf;
> +
> +	while (cnt < nbyte) {
> +		*rxf_buf = bitbang_txrx_be_cpha1(spi, 1000, 1, 0, 8);
> +		rxf_buf++;
> +		cnt++;
> +	}
> +
> +	return cnt;
> +}
> +
> +static int litex_spiflash_spi_write(struct spi_device *spi,
> +				const void *buf, size_t nbyte)
> +{
> +	ssize_t cnt = 0;
> +	const u8 *txf_buf = buf;
> +
> +	while (cnt < nbyte) {
> +		bitbang_txrx_be_cpha1(spi, 1000, 1, (u32)*txf_buf, 8);
> +		txf_buf++;
> +		cnt++;
> +	}
> +
> +	return 0;
> +}
> +
> +static int litex_spiflash_spi_transfer(struct spi_device *spi, struct spi_message *mesg)
> +{
> +	struct litex_spiflash_spi *sc = litex_spiflash_spidev_to_sp(spi);
> +	struct spi_transfer *t;
> +
> +	mesg->actual_length = 0;
> +
> +	/* activate chip select signal */
> +	litex_spiflash_spi_chipselect(sc, 0);
> +
> +	list_for_each_entry(t, &mesg->transfers, transfer_list) {
> +
> +		if (t->tx_buf)
> +			litex_spiflash_spi_write(spi, t->tx_buf, t->len);
> +
> +		if (t->rx_buf)
> +			litex_spiflash_spi_read(spi, t->rx_buf, t->len);
> +
> +		mesg->actual_length += t->len;
> +	}
> +
> +	/* inactivate chip select signal */
> +	litex_spiflash_spi_chipselect(sc, 1);
> +
> +	return 0;
> +}
> +
> +static void litex_spiflash_spi_enable(struct litex_spiflash_spi *sp)
> +{
> +	u32 val;
> +
> +	/* set SPIFLASH_BB_DIR = 0 */
> +	val = SPIFLASH_BB_CSN | SPIFLASH_BB_CLK | SPIFLASH_BB_MOSI;
> +	litex_spiflash_spi_wr(sp, val, SPIFLASH_BITBANG);
> +
> +	/* enable GPIO mode */
> +	litex_spiflash_spi_wr(sp, 1, SPIFLASH_BITBANG_EN);
> +}
> +
> +static void litex_spiflash_spi_disable(struct litex_spiflash_spi *sp)
> +{
> +	/* disable GPIO mode */
> +	litex_spiflash_spi_wr(sp, 0, SPIFLASH_BITBANG_EN);
> +}
> +
> +static int litex_spiflash_spi_probe(struct device_d *dev)
> +{
> +	struct resource *iores;
> +	struct spi_master *master;
> +	struct litex_spiflash_spi *litex_spiflash_spi;
> +
> +	litex_spiflash_spi = xzalloc(sizeof(*litex_spiflash_spi));
> +	dev->priv = litex_spiflash_spi;
> +
> +	master = &litex_spiflash_spi->master;
> +	master->dev = dev;
> +
> +	master->bus_num = dev->id;
> +	master->setup = litex_spiflash_spi_setup;
> +	master->transfer = litex_spiflash_spi_transfer;
> +	master->num_chipselect = 1;
> +
> +	iores = dev_request_mem_resource(dev, 0);
> +	if (IS_ERR(iores))
> +		return PTR_ERR(iores);
> +	litex_spiflash_spi->regs = IOMEM(iores->start);
> +
> +	litex_spiflash_spi_enable(litex_spiflash_spi);
> +
> +	/* inactivate chip select signal */

Nitpick s/inactivate/deactivate/

> +	litex_spiflash_spi_chipselect(litex_spiflash_spi, 1);
> +
> +	spi_register_master(master);
> +
> +	return 0;
> +}
> +
> +static void litex_spiflash_spi_remove(struct device_d *dev)
> +{
> +	struct litex_spiflash_spi *sp = dev->priv;
> +
> +	litex_spiflash_spi_disable(sp);
> +}
> +
> +static __maybe_unused struct of_device_id litex_spiflash_spi_dt_ids[] = {
> +	{
> +		.compatible = "litex,spiflash",
> +	},
> +	{
> +		/* sentinel */
> +	}
> +};
> +
> +static struct driver_d litex_spiflash_spi_driver = {
> +	.name  = "litex-spiflash",
> +	.probe = litex_spiflash_spi_probe,
> +	.remove = litex_spiflash_spi_remove,
> +	.of_compatible = DRV_OF_COMPAT(litex_spiflash_spi_dt_ids),
> +};
> +device_platform_driver(litex_spiflash_spi_driver);
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2021-05-05 10:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-05 10:08 [PATCH 0/9] RISC-V: add LiteX SoC support; resurrect nmon Antony Pavlov
2021-05-05 10:08 ` [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code Antony Pavlov
2021-05-05 10:27   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-05-05 10:28   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 3/9] serial: add litex UART driver Antony Pavlov
2021-05-05 10:32   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-05-05 10:35   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 5/9] spi: add litex spiflash driver Antony Pavlov
2021-05-05 10:39   ` Ahmad Fatoum [this message]
2021-05-05 15:10     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 6/9] net: add LiteEth driver Antony Pavlov
2021-05-06 10:10   ` Roland Hieber
2021-05-06 11:33     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 7/9] RISC-V: add initial LiteX SoC support Antony Pavlov
2021-05-05 10:16   ` Ahmad Fatoum
2021-05-05 10:45   ` Jan Lübbe
2021-05-05 15:23     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 8/9] RISC-V: add litex-linux board support Antony Pavlov
2021-05-05 10:19   ` Ahmad Fatoum
2021-05-05 10:36     ` Antony Pavlov
2021-05-05 10:09 ` [PATCH 9/9] RISC-V: add litex_linux_defconfig Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6afef336-25fc-9b4f-eb4c-8e99f7b118ac@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox