From: "Yazdani, Reyhaneh" <RYazdani@data-modul.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: eMMC probe in imx8mm
Date: Thu, 11 Jul 2019 13:30:09 +0000 [thread overview]
Message-ID: <70da4cd2-8c3a-55f4-711a-024d7f094939@data-modul.com> (raw)
In-Reply-To: <20190709094640.n2hrjjed5ghywsea@pengutronix.de>
On 7/9/19 11:46 AM, Sascha Hauer wrote:
> Hi Reyhaneh,
>
> On Fri, Jul 05, 2019 at 02:04:08PM +0000, Yazdani, Reyhaneh wrote:
>> Hello everyone,
>>
>> I have brought up Barebox on imx8mm-evk board. Barebox is programmed on SD-card.
>> In the Barebox console, when I probe eMMC, I will receive I/O error.
>>
>> Therefore, similar to the imx8mq device tree, I added clk node to assign
>> clock-parent and clock-rates of the assigned clock of the eMMC (usdhc3):
>>
>> &clk {
>> assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
>> assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
>> assigned-clock-rates = <200000000>;
>> };
>>
>> Now, eMMC probe works and eMMC is detected. But when I want to boot from eMMC,
>>
>> Loading ARM aarch64 Linux image '/mnt/mmc2/Image' takes about 13-14 seconds!!
>
> How big is this image?
>
> Is only the eMMC card so slow or the SD card aswell?
>
> Does clk_dump give you any clue which clock rate the usdhc controller
> actually has (and is it the same as the other controller with the SD
> card)?
>
> Just some questions, I am not very familiar with the i.MX8 clock tree.
Hi Sascha,
It was related to the no initialization of PLL-clock. SYS_PLL1 is used as clock
parents for eMMC and it was not initialized in clock driver.
Best regards,
Reyhaneh
--
Reyhaneh Yazdani
Data Modul AG TEL: +49-89-56017-154
Embedded development FAX: +49-89-56017-119
Linux - Development RG: HR-Muenchen B-85591
Landsberger Str. 322 D-80687 Muenchen - http://www.data-modul.com
Vertrauliche E-Mail von / Confidential e-mail from: DATA MODUL AG
Vorstand / CEO: Dr. Florian Pesahl
Vorsitzende des Aufsichtsrates / Chairwoman of the Supervisory Board: Kristin D. Russell
Sitz der Gesellschaft / Registered Office: München
Registergericht / Registration Court: München Handelsregister B 85 591
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-07-11 13:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-05 14:04 Yazdani, Reyhaneh
2019-07-09 9:46 ` Sascha Hauer
2019-07-11 13:30 ` Yazdani, Reyhaneh [this message]
2019-07-12 6:12 ` Yazdani, Reyhaneh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=70da4cd2-8c3a-55f4-711a-024d7f094939@data-modul.com \
--to=ryazdani@data-modul.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox