mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Stefan Riedmüller" <S.Riedmueller@phytec.de>
To: "sha@pengutronix.de" <sha@pengutronix.de>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: [PATCH 2/2] mtd: nand_bbt: Skip bad blocks when searching for the BBT in NAND
Date: Wed, 17 Mar 2021 17:14:05 +0000	[thread overview]
Message-ID: <8683628e4ef3f07ea2281e48478f71d81e00729a.camel@phytec.de> (raw)
In-Reply-To: <20210317094106.GZ23724@pengutronix.de>

Hi Sascha,

On Wed, 2021-03-17 at 10:41 +0100, Sascha Hauer wrote:
> Hi Stefan,
> 
> On Tue, Mar 16, 2021 at 01:36:26PM +0100, Stefan Riedmueller wrote:
> > The blocks containing the bad block table can become bad as well. So
> > make sure to skip any blocks that are marked bad when searching for the
> > bad block table.
> 
> The file is a more or less direct copy from the kernel. Does the problem
> exist in the kernel as well?

>From my point of view I would say yes. I have just made a small test Issue is
shown in the kernel as well. It is a very raw case where two BBT blocks need
to be worn out but on the other hand this fix should not have that much of an
impact.

I will send a similar patch to the kernel.

Stefan

> 
> Sascha
> 
> > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> > ---
> >  drivers/mtd/nand/nand_bbt.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
> > index a86b5b2da38e..0b48373e6a0b 100644
> > --- a/drivers/mtd/nand/nand_bbt.c
> > +++ b/drivers/mtd/nand/nand_bbt.c
> > @@ -528,6 +528,7 @@ static int search_bbt(struct nand_chip *this, uint8_t
> > *buf,
> >  {
> >  	u64 targetsize = nanddev_target_size(&this->base);
> >  	struct mtd_info *mtd = nand_to_mtd(this);
> > +	struct nand_bbt_descr *bd = this->badblock_pattern;
> >  	int i, chips;
> >  	int startblock, block, dir;
> >  	int scanlen = mtd->writesize + mtd->oobsize;
> > @@ -563,6 +564,9 @@ static int search_bbt(struct nand_chip *this, uint8_t
> > *buf,
> >  			int actblock = startblock + dir * block;
> >  			loff_t offs = (loff_t)actblock << this-
> > >bbt_erase_shift;
> >  
> > +			/* Check if block is marked bad */
> > +			if (scan_block_fast(this, bd, offs, buf))
> > +				continue;
> >  			/* Read first page */
> >  			scan_read(this, buf, offs, mtd->writesize, td);
> >  			if (!check_pattern(buf, scanlen, mtd->writesize, td))
> > {
> > -- 
> > 2.25.1
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> > 
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2021-03-17 17:14 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-16 12:36 [PATCH 1/2] nand: nand-mxs: Fix marking BBT blocks as bad Stefan Riedmueller
2021-03-16 12:36 ` [PATCH 2/2] mtd: nand_bbt: Skip bad blocks when searching for the BBT in NAND Stefan Riedmueller
2021-03-17  9:41   ` Sascha Hauer
2021-03-17 17:14     ` Stefan Riedmüller [this message]
2021-03-22  5:59       ` sha
2021-03-29  7:20         ` Stefan Riedmüller
2021-04-14 13:18           ` Stefan Riedmüller
2021-04-14 14:36             ` sha
2021-04-20  6:29               ` Stefan Riedmüller
2021-05-07  7:52                 ` sha
2021-03-22  5:57 ` [PATCH 1/2] nand: nand-mxs: Fix marking BBT blocks as bad Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8683628e4ef3f07ea2281e48478f71d81e00729a.camel@phytec.de \
    --to=s.riedmueller@phytec.de \
    --cc=barebox@lists.infradead.org \
    --cc=sha@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox