From: Robert Jarzmik <robert.jarzmik@free.fr>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
barebox@lists.infradead.org,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Subject: Re: [PATCH 00/17] Armada 370/XP NAND driver
Date: Tue, 13 Oct 2015 12:38:51 +0200 [thread overview]
Message-ID: <87wpur3ves.fsf@belgarion.home> (raw)
In-Reply-To: <20151013102725.GH7858@pengutronix.de> (Sascha Hauer's message of "Tue, 13 Oct 2015 12:27:25 +0200")
Sascha Hauer <s.hauer@pengutronix.de> writes:
> In your temporary patch you have:
>
>> @@ -67,6 +71,9 @@ static int zylonite_devices_init(void)
>> &smsc91x_pdata);
>> add_generic_device("mrvl_nand", DEVICE_ID_DYNAMIC, NULL,
>> 0x43100000, 0x1000, IORESOURCE_MEM, &nand_pdata);
>> + clk = clk_get_sys("nand", NULL);
>> + if (!IS_ERR(clk))
>> + clkdev_add_physbase(clk, 0x43100000, NULL);
>
> Could it be that you register the clk lookup after the nand driver is probed? This
> hunk should be moved before the nand device registration.
That's what I had thought, but changing the order gave me a panic, so I didn't
push forward.
This is what I had, decoded in [1].
Cheers.
--
Robert
[1] My backtrace with the inversion :
barebox@Zylonite:/ bootm /mnt/tftp/barebox.bin
bootm /mnt/tftp/barebox.bin
netconsole: netconsole initialized with 255.255.255.255:6662
eth0: 100Mbps full duplex link detected
DHCP client bound to address 192.168.1.232
Loading ARM barebox image '/mnt/tftp/barebox.bin'
commandline: ram=64M console=ttyS0,115200 mtdparts=pxa3xx_nand-0:128k@0(TIMH)ro,128k@128k(OBMI)ro,768k@256k(barebox),256k@1024k(barebox-env),12M@1280k(kernel),38016k@13568k(root)
arch_number: 1233
netconsole: port not set
netconsole: registered as netconsole-1
smc91c111 smc91c1110: chip is revision= 9, version= 2
mdio_bus: miibus0: probed
eth0: got preset MAC address: 00:0e:0c:a7:26:f7
zylonite_devices_init(): clk = 83703328
alloc_nand_resource(): clk_get() -> 83703328
unable to handle NULL pointer dereference at address 0x00000004
pc : [<83f15b9c>] lr : [<83f15b90>]
sp : 83fffed0 ip : 000001b0 fp : 00000000
r10: 00000002 r9 : 83706888 r8 : 83f8c88c
r7 : 00000000 r6 : 00000000 r5 : 83706948 r4 : 00000000
r3 : 83706888 r2 : 43100000 r1 : 83f60783 r0 : 00000000
Flags: nZCv IRQs off FIQs off Mode SVC_32
(mrvl_nand_probe+0x1ac/0x650) from device_probe (/drivers/base/driver.c:93)
(device_probe+0x30/0xb8) from match.part.3 (/drivers/base/driver.c:153)
(match.part.3+0x44/0x54) from register_device (/drivers/base/driver.c:192)
(register_device+0x120/0x15c) from add_generic_device (/drivers/base/resource.c:84)
(add_generic_device+0x3c/0x48) from zylonite_devices_init (/arch/arm/boards/zylonite/board.c:78)
(zylonite_devices_init+0x9c/0x108) from start_barebox (/common/startup.c:101)
(start_barebox+0x30/0xe8) from __start (/arch/arm/cpu/start.c:142)
(__start+0x124/0x13c) from 0x8386c290
(unwind_backtrace+0x0/0x90) from panic (/common/misc.c:209)
(panic+0x28/0x38) from do_exception (/arch/arm/cpu/interrupts.c:85)
(do_exception+0x10/0x14) from do_data_abort (/arch/arm/cpu/interrupts.c:139)
(do_data_abort+0x2c/0x38) from do_abort_6 (:?)
### ERROR ### Please RESET the board ###
And a special gift :
rj@belgarion:~/mio_linux/barebox$ addr2line -i -e barebox 0x83f15b9c
/home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1172
/home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1202
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-10-13 10:44 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 22:06 Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 01/17] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx Sebastian Hesselbarth
2015-10-09 19:11 ` Robert Jarzmik
2015-10-09 19:13 ` Robert Jarzmik
2015-10-10 8:34 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 02/17] mtd: nand_mrvl_nfc: Use common clock for core clock Sebastian Hesselbarth
2015-10-10 8:35 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 03/17] mtd: nand: Clarify Marvell Orion Kconfig prompt Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 04/17] arm: pxa: Remove pxa_get_nandclk() Sebastian Hesselbarth
2015-10-10 8:35 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 05/17] mtd: nand_mrvl_nfc: Remove keep_config Sebastian Hesselbarth
2015-10-09 19:16 ` Robert Jarzmik
2015-10-09 19:32 ` Sebastian Hesselbarth
2015-10-09 21:14 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 06/17] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00 Sebastian Hesselbarth
2015-10-10 8:38 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 07/17] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase Sebastian Hesselbarth
2015-10-10 8:44 ` Robert Jarzmik
2015-10-10 9:36 ` Sebastian Hesselbarth
2015-10-10 9:49 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 08/17] mtd: nand_mrvl_nfc: Fix num-cs property parsing Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 09/17] mtd: nand_mrvl_nfc: Get ecc parameters from DT Sebastian Hesselbarth
2015-10-11 20:39 ` Robert Jarzmik
2015-10-12 6:28 ` Sascha Hauer
2015-10-12 7:32 ` Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 10/17] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 11/17] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions Sebastian Hesselbarth
2015-10-12 6:33 ` Sascha Hauer
2015-10-08 22:06 ` [PATCH 12/17] mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 13/17] mtd: nand_mrvl_nfc: Add support for 8bit " Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 14/17] mtd: nand_mrvl_nfc: Add support for HW BCH ECC Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 15/17] mtd: nand_mrvl_nfc: Add support for NDCB3 register Sebastian Hesselbarth
2015-10-10 8:48 ` Robert Jarzmik
2015-10-10 17:17 ` Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 16/17] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP Sebastian Hesselbarth
2015-10-10 8:48 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 17/17] mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U Sebastian Hesselbarth
2015-10-12 10:38 ` [PATCH 00/17] Armada 370/XP NAND driver Robert Jarzmik
2015-10-12 18:41 ` Sebastian Hesselbarth
2015-10-12 19:16 ` Robert Jarzmik
2015-10-12 19:59 ` Sebastian Hesselbarth
2015-10-13 9:35 ` Robert Jarzmik
2015-10-13 9:53 ` Sebastian Hesselbarth
2015-10-13 10:27 ` Sascha Hauer
2015-10-13 10:38 ` Robert Jarzmik [this message]
2015-10-13 10:54 ` Sascha Hauer
2015-10-15 21:17 ` Sebastian Hesselbarth
2015-10-16 18:40 ` Robert Jarzmik
2015-10-16 19:32 ` Sebastian Hesselbarth
2015-10-20 19:25 ` Robert Jarzmik
2015-11-19 23:16 ` Sebastian Hesselbarth
2015-11-20 7:18 ` Robert Jarzmik
2015-10-12 17:55 ` [PATCH] of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wpur3ves.fsf@belgarion.home \
--to=robert.jarzmik@free.fr \
--cc=barebox@lists.infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=s.hauer@pengutronix.de \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox