mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[RFC] Select CMD_LOADENV with DEFAULT_ENVIRONMENT
 2012-02-07 22:18 UTC  (2+ messages)

for which OMAP platform is MCI_OMAP_HSMMC appropriate?
 2012-02-07 22:12 UTC  (2+ messages)

why would beagle and panda boards not have CONFIG_MCI_STARTUP set?
 2012-02-07 22:06 UTC  (2+ messages)

"make distclean" doesn't remove generated MLO file
 2012-02-07 21:59 UTC  (9+ messages)

[PATCH] Add CONFIG_MCI_STARTUP=y to BeagleBoard defconfig
 2012-02-07 21:08 UTC 

[PATCH] Correct Kconfig comment for MCI_OMAP_HSMMC to include OMAP3
 2012-02-07 21:01 UTC 

[PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage
 2012-02-07 20:22 UTC  (10+ messages)
` [PATCH 2/2] pandaboard: Add gpmc_generic_init to board init

An observation with omap_xload
 2012-02-07 17:23 UTC 

[PATCH 0/2] omap3evm: Enable Linux boot
 2012-02-07 16:24 UTC  (4+ messages)
` [PATCH 1/2] omap3evm: Remove inclusion of non-existent header
` [PATCH 2/2] omap3evm: Setup ATAGs for Linux boot

[PATCH] Fix Mac OS cross compile failed
 2012-02-07 14:45 UTC 

[PATCH] Remove apparently superfluous Kconfig variable HAS_OMAP_NAND
 2012-02-07 12:01 UTC 

any value in allowing user selection of barebox prompt?
 2012-02-07 11:56 UTC  (4+ messages)

what is the purpose of config option HAS_OMAP_NAND?
 2012-02-07 11:00 UTC  (3+ messages)

[PATCH] Add ARCH_OMAP[34] dependencies to Kconfig file
 2012-02-06 20:58 UTC 

[PATCH] DOC: Some grammar and spelling fixes for barebox-main.dox
 2012-02-06 16:24 UTC 

[PATCH] DOC: Grammar and typo fixes in first_steps.dox
 2012-02-06 16:15 UTC 

v2012.02.0
 2012-02-06 12:44 UTC 

how do i add the defn for the beagle xM to barebox?
 2012-02-06 11:33 UTC  (11+ messages)

[PATCH] Typo fix in Kconfig file: "Invlidate" -> "Invalidate"
 2012-02-05 23:33 UTC 

linking error x86 barebox
 2012-02-03 19:34 UTC  (2+ messages)

[PATCH] Add pwm core support
 2012-02-03 15:39 UTC  (5+ messages)
` [PATCH] drivers/pwm: add PXA pulse width modulator controller

booting kernel from SD card
 2012-01-31 21:29 UTC 

IIM on iMX27 "how-to" needed
 2012-01-31 13:12 UTC  (4+ messages)

[PATCH] drivers/mtd: fix mtdraw write support
 2012-01-31  9:37 UTC  (8+ messages)
` [PATCH] drivers/mtd: fix docg3 "
` [PATCH] arm/mach-pxa: add standard LCD panel GPIO settings
` [PATCH] arm/mach-pxa: add CCCR bits definitions
` [PATCH] arm/mach-pxa: add pulse width modulator controller

Pandaboard kernel 3.2.1 loaded from barebox
 2012-01-30 10:51 UTC  (4+ messages)

mx35-3stack 124MiByte RAM
 2012-01-27 12:39 UTC  (3+ messages)

Booting linux on a custom iMX27 board
 2012-01-27 11:23 UTC  (3+ messages)

[PATCH] ARM omap pandaboard: update defconfig
 2012-01-27 11:20 UTC 

i.MX53 QSB
 2012-01-26 13:45 UTC  (6+ messages)

some debug patches
 2012-01-26 13:26 UTC  (8+ messages)
` [PATCH 1/7] console: remove unused function prototypes
` [PATCH 2/7] kfifo: change kfifo_init to work with a preallocated fifo
` [PATCH 3/7] console: make it work without malloc
` [PATCH 4/7] ARM: panic on div 0
` [PATCH 5/7] initcalls: do not hang if an initcall fails
` [PATCH 6/7] startup: use regular debug statements in initcall debugging
` [PATCH 7/7] Add dump_stack function

[PATCH 0/9] MPC8xxx support
 2012-01-25 19:33 UTC  (13+ messages)
` [PATCH 1/9] Preparation stage to support multiple PPC architectures
` [PATCH 2/9] Define clock source shift and mask
` [PATCH 3/9] Added support for the mpc8xxx architecture
` [PATCH 4/9] Header files added to support "
` [PATCH 5/9] Update to existing header files
` [PATCH 6/9] Add file and compilation of strmhz
` [PATCH 7/9] Add-ons to the PPC library to support the mpc8xxx
` [PATCH 8/9] Update (ppc) Makefile and Kconfig
` [PATCH 9/9] P1_P2 platform support code and configuratin file for the P2020RDB

Kconfig
 2012-01-25 15:41 UTC 

[PATCH 0/5] fec_imx & miidev: support for 10 MBit connections
 2012-01-24 15:40 UTC  (8+ messages)
` [PATCH 1/5] net: fec_imx: small cleanups
` [PATCH 2/5] net: fec_imx: refactor R_CNTRL setup
` [PATCH 3/5] net: fec_imx: enable payload length check and pause frames
` [PATCH 4/5] net: miidev: factor out miidev_get_status()
` [PATCH 5/5] net: fec_imx: configure FEC for 10Mbit when necessary

[PATCH 0/6] update mx35_3ds suppoprt
 2012-01-24 10:51 UTC  (7+ messages)
` [PATCH 1/6] net/nfs: increase timeout to 15 seconds
` [PATCH 2/6] show_progress: fix progress bar for files > 32 MiB
` [PATCH 3/6] defaultenv: update: add nfs support
` [PATCH 4/6] ARM: mx3/mx35_3ds: add missing nand device
` [PATCH 5/6] ARM: mx3/mx35_3ds: increase kernel partition size to 4 MiB
` [PATCH 6/6] ARM: mx3/mx35_3ds: add (optinal) support for flexcan0

Thumb-2 support
 2012-01-24  4:39 UTC  (7+ messages)
` [PATCH 7/9] ARM: move exception vectors away from start of binary

[PATCH] ARM pca-a-l1: call omap3_core_init from board code
 2012-01-23 21:17 UTC  (7+ messages)
` [PATCH] ARM pca-a-l1: delete platform.S
` [PATCH] ARM pca-a-l1: fix board_init
` [PATCH] ARM pca-a-l1: should depend on ARCH_OMAP3

[PATCH] usb/gadget: fix poller NPE in early polling
 2012-01-23 16:25 UTC  (8+ messages)
  ` [PATCH V2] "
      ` [PATCH V3] "

Freescale i.MX35 using CSD1 and 256 MiB DDR2
 2012-01-23 14:04 UTC  (8+ messages)
` [PATCH] freescale-mx35-3-stack: support 256 MiB RAM

[PATCH 1/5] imx-ipu-fb: Add support for multiple video modes
 2012-01-23  8:40 UTC  (6+ messages)
` [PATCH 2/5] video imx-ipu-fb: add num_modes to imx3 boards
` [PATCH 3/5] imx-ipu-fb: Fix offset for IPU Clock
` [PATCH 4/5] imx-ipu-fb: Add overlay support
` [PATCH 5/5] ARM pcm043: "

git pull failed: CONFLICT
 2012-01-19  8:44 UTC  (3+ messages)

[PATCH 1/2] introduce barebox_bare_init_size to known the bare_init size and check it
 2012-01-18 22:19 UTC  (3+ messages)
` [PATCH 2/2] at91: specify the bare_init max size for each soc

[PATCH 1/1] Revert "mtd omap nand: fix driver without CONFIG_PARAMETER"
 2012-01-18 15:43 UTC 

[PATCH v4 0/2] ns16550-related patches
 2012-01-18  6:31 UTC  (5+ messages)
` [PATCH v4 1/4] ns16550: support for UART with broken FIFO
` [PATCH v4 2/4] ns16550: make ns16550_serial_init_port() shorter
` [PATCH v4 3/4] ns16550: write zero to ier only once
` [PATCH v4 4/4] ns16550: fix ier selection

[RFC] ns16550: support for UART with broken FIFO
 2012-01-17 23:58 UTC  (6+ messages)

[PATCH v3 0/2] ns16550-related patches
 2012-01-17 20:30 UTC  (3+ messages)
` [PATCH v3 1/2] ns16550: support for UART with broken FIFO
` [PATCH v3 2/2] ns16550: make ns16550_serial_init_port() shorter

[PATCH v2] ns16550: support for UART with broken FIFO
 2012-01-17 20:00 UTC 

[PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
 2012-01-17 19:42 UTC 

[PATCH 1/2 v3] add config to check if the size of barebox exceed the target size
 2012-01-17 14:48 UTC  (2+ messages)
` [PATCH 2/2 v2] calao/boards: specify BAREBOX_MAX_IMAGE_SIZE to 256KiB

[PATCH 1/2 v2] add config to check if the size of barebox exceed the target size
 2012-01-17 14:48 UTC  (4+ messages)
` [PATCH 2/2 v2] calao/boards: specify BAREBOX_MAX_IMAGE_SIZE to 256KiB

[PATCH] omap3 towards thumb2 support
 2012-01-17 13:20 UTC  (12+ messages)

[PATCH 0/5] Calao dfu upload kernel or uImage and boot it
 2012-01-17 10:35 UTC  (5+ messages)
` [PATCH 4/5] filetype: add command support
` [PATCH 5/5] usb-926x: add dfu mem options support

[PATCH] ARM pca-a-l1: fix board_init
 2012-01-17 10:23 UTC 

[PATCH 1/1] atmel_nand: disable hardware ecc if not enable
 2012-01-16 16:10 UTC 

Barebox IRC channel
 2012-01-16 15:46 UTC  (2+ messages)

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox