mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH 1/3] pm9g45: fix Ethernet
 2012-03-21 16:43 UTC  (23+ messages)
` [PATCH 2/3] pm9g45: enable MCI0
` [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage
` [PATCH v2 1/4] pm9g45: boot from NAND
  ` [PATCH v2 2/4] pm9g45: fix Ethernet
  ` [PATCH v2 3/4] pm9g45: enable MCI0
  ` [PATCH v2 4/4] pm9g45: enable USB OHCI host and USB mass storage
` [PATCH v3 1/4] pm9g45: boot from NAND
  ` [PATCH v3 2/4] pm9g45: fix Ethernet
  ` [PATCH v3 3/4] pm9g45: enable MCI0
  ` [PATCH v3 4/4] pm9g45: enable USB OHCI host and USB mass storage

barebox-2012.03.0 imx_get_i2cclk
 2012-03-21 13:29 UTC 

[PATCH 0/3] miidev: improve phy initialization
 2012-03-21 11:18 UTC  (4+ messages)
` [PATCH 1/3] net: miidev: check for errors when accessing bus in restart_aneg
` [PATCH 2/3] net: miidev: Refactor timeout for aneg
` [PATCH 3/3] net: miidev: properly check for MII reset

kconfig-frontends: a packaging of the kconfig language
 2012-03-20 22:17 UTC 

[PATCH 2/2] i.MX27: Add support for SDHC1
 2012-03-20 13:09 UTC  (6+ messages)
  ` [PATCH 1/3] i.MX27: Define base address for SDHC1,2,3
  ` [PATCH 2/3] i.MX27: Add support for SDHC1,3
  ` [PATCH 3/3] i.MX51: Fix name definition for SSI3

flash_header for mx51
 2012-03-19 22:44 UTC  (2+ messages)

[PATCH] defenv: remove bogus defaultenv from defconfigs
 2012-03-18 15:33 UTC 

[PATCH] Add support for Karo TX51 module
 2012-03-18 15:22 UTC  (2+ messages)

[PATCH] Remove duplicate voltage setup for imx-esdhc
 2012-03-18 15:16 UTC  (2+ messages)

[PATCH 2/3] Use mx53-related functions for i.MX53 boards
 2012-03-18 15:15 UTC  (2+ messages)

[PATCH 1/3] Use register names for MC13892
 2012-03-18 15:13 UTC  (2+ messages)

[PATCH] i.MX27: Use resigter name in imx27_add_fb
 2012-03-18 15:13 UTC  (2+ messages)

[PATCH 1/2] i.MX27: Define SDHC base address
 2012-03-18 15:10 UTC  (2+ messages)

[PATCH] automount support
 2012-03-18 14:26 UTC  (9+ messages)
` [PATCH 1/8] fs: change get_fs_device_by_path prototype
` [PATCH 2/8] fs: drop struct mtab_entry
` [PATCH 3/8] Add automount support
` [PATCH 4/8] fs open: pass error from stat
` [PATCH 5/8] hush source: expand $PATH
` [PATCH 6/8] FAT: Fix error path
` [PATCH 7/8] usb command: by default scan only once for USB devices
` [PATCH 8/8] partition command: optionally do not automatically prepend the device name

[PATCH 3/3] i.MX51: Fix NANDF_RDY_INT pin definition
 2012-03-18  8:59 UTC 

[PATCH 2/2] PCM038: add support for MMC
 2012-03-18  5:16 UTC  (3+ messages)
  ` Re[2]: "

[PATCH 1/2] i.MX51: add support for UART3
 2012-03-17 16:21 UTC  (2+ messages)

[PATCH] i.MX51: Remove GPIO2.6 setup from lowlevel_init
 2012-03-17 16:21 UTC  (2+ messages)

[PATCH 1/5] pcm049: Update RAM timings
 2012-03-15 19:55 UTC  (6+ messages)
` [PATCH 2/5] pcm049: Update muxing
` [PATCH 3/5] pcm049: Update GPMC net conf
` [PATCH 4/5] devices-gpmc-nand: Add OMAP4 gpmc nand timings
` [PATCH 5/5] pcm049_xload_defconfig: activate Thumb-2 support

[PATCH] pcm038: increase size of barebox partition
 2012-03-15 19:55 UTC  (2+ messages)

[PATCH 00/14] Atmel Reference Board Update
 2012-03-14 19:28 UTC  (2+ messages)

[PATCH 1/2] defaultenv: add bootp support
 2012-03-13 17:45 UTC  (2+ messages)
` [PATCH 2/2] defaultenv: add dhcp-barebox option

[PATCH 1/1] at91: set dhcp vendor id on Atmel Reference board
 2012-03-13 17:43 UTC 

Shall 'bmp' uncompress automagically?
 2012-03-13 17:16 UTC  (4+ messages)

[PATCH 01/14] macb: fix mmu support
 2012-03-13 17:13 UTC  (16+ messages)
` [PATCH 02/14] at91sam9263ek: add runtime nor detection
` [PATCH 03/14] at91sam9263ek: add leds support
` [PATCH 04/14] at91sam9263ek: add dfu and usb serial support
` [PATCH 05/14] at91sam9263ek: update defconfig
` [PATCH 06/14] at91sam9261ek/9g10ek: update partition layout
` [PATCH 07/14] at91sam9261ek/9g10ek: add leds support
` [PATCH 08/14] at91sam9261ek/9g10ek: add dfu and usb serial support
` [PATCH 09/14] at91sam9261ek/9g10ek: add gpio Keyboard support
` [PATCH 10/14] at91sam9261ek/9g10ek: update board supprt
` [PATCH 11/14] at91sam9m10g45ek: update partition layout
` [PATCH 12/14] at91sam9m10g45ek: add leds support
` [PATCH 13/14] at91sam9m10g45ek: update defconfig
` [PATCH 14/14] at91sam9260ek/9g20ek: "

[RFC] ARM/serial: add a DCC based console driver
 2012-03-13 13:32 UTC  (4+ messages)

[PATCH] ENV: remove kernelimage_type from env/config
 2012-03-13 12:36 UTC  (2+ messages)

[PATCH] NET: Add support for ks8851_mll
 2012-03-13 12:36 UTC  (4+ messages)
  ` [PATCH v2] "

[PATCH] omap: add support for phycard-a-xl2
 2012-03-13 12:35 UTC  (4+ messages)
  ` [PATCH v2] "

[PATCH] drivers/mtd: improve docg3 write speed
 2012-03-13 12:25 UTC  (2+ messages)

[PATCH] imx_nand_load_image: change all users to use barebox_image_size
 2012-03-13 12:24 UTC  (2+ messages)

serial S3: fix local structure malloc
 2012-03-13 12:24 UTC  (2+ messages)

[PATCH 1/1] net: dhcp: allow to set transmitted vendor id
 2012-03-12 21:44 UTC  (2+ messages)

[PATCH 00/14] Atmel ref board update
 2012-03-12 10:47 UTC 

[RFC V2 0/6] barebox PCI support
 2012-03-09 18:17 UTC  (10+ messages)
` [RFC V2 1/6] PCI: initial commit (draft)
` [RFC V2 2/6] MIPS: add file gt64120.h from linux 2.6.39
` [RFC V2 3/6] MIPS: add PCI support for GT64120-based malta
` [RFC V2 4/6] PCI: add draft lspci command
` [RFC V2 5/6] net: add Realtek 8139 Ethernet controller support
` [RFC V2 6/6] net: add DEC 21143 (tulip) "

__bss_stop question
 2012-03-08 13:45 UTC  (3+ messages)

[PATCH 1/5] net: use net_alloc_packet to allocate packet
 2012-03-07  9:21 UTC  (9+ messages)
` [PATCH 2/5] net: introduce net_free_packet to free the packet
` [PATCH 3/5] net: allow the drivers to specify the tx buffer allocator
` [PATCH 4/5] macb: implement alloc_packet & free_packet
` [PATCH 5/5] macb: add timeout on send

[PATCH 1/2] omap: move scale_vcores to omap4_generic
 2012-03-07  8:56 UTC  (7+ messages)
` [PATCH 2/2] omap: move do_set_mux "
    ` [PATCH 1/2 v2] omap: move scale_vcores "
    ` [PATCH 2/2 v2] omap: move do_set_mux "

[PATCH] fs: flush device on close
 2012-03-07  8:46 UTC  (2+ messages)

[PATCH] net: dhcp: allow to set transmitted vendor id
 2012-03-07  8:42 UTC  (3+ messages)

[PATCH] fb: added flush() method to synchronize the used DMA buffer
 2012-03-06 19:09 UTC 

[PATCH] bmp: honor alpha channel bits
 2012-03-06 18:41 UTC 

[PATCH] show_progress: minor optimizations
 2012-03-06 18:01 UTC 

v2012.03.0
 2012-03-06  9:53 UTC 

[PATCH/RFC 3/4] barebox-data: add barebox-data sections
 2012-03-06  9:05 UTC  (2+ messages)
  ` [PATCH/RFC 4/4] memtest: rewrite memtest commands

[PATCH 1/2 v2] macb: add timeout on send
 2012-03-05 18:00 UTC  (2+ messages)
` [PATCH 2/2] macb: fix mmu support

[PATCH] mach-omap: add HAS_DEBUG_LL
 2012-03-05 17:13 UTC  (2+ messages)

[PATCH] pca-a-l1: remove duplicate includes
 2012-03-04 12:01 UTC  (2+ messages)

[PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage
 2012-03-03 12:11 UTC  (4+ messages)
` [PATCH 2/2] pandaboard: Add gpmc_generic_init to board init

AT91SAM9G45: MACB: not usable Ethernet when MMU is enabled
 2012-03-02 17:16 UTC  (4+ messages)

Booting PPC Linux
 2012-03-02 16:28 UTC  (3+ messages)

[PATCH 1/2] pcaam1: Add support for the Phytec phyCARD-A-M1 (PCA-A-M1)
 2012-03-02  8:28 UTC  (4+ messages)
` [PATCH 2/2] pcaam1: Change the machine id/name to follow the phyCARD naming convention

[PATCH] Thumb2 support
 2012-03-01  4:40 UTC  (8+ messages)
` [PATCH 1/3] ARM: move exception vectors away from start of binary
` [PATCH 2/3] ARM: get runtime offset of board_init_lowlevel_return by using separate section
` [PATCH 3/3] ARM: Allow to compile in thumb-2 mode

[PATCH V3] arm/mach-pxa: add mioa701 board
 2012-02-29  7:41 UTC  (2+ messages)

[PATCH] drivers/serial: trivial regression fix
 2012-02-29  7:41 UTC  (2+ messages)

[PATCH] drivers/mci: fix read/write stalling
 2012-02-29  7:39 UTC  (4+ messages)

PATCH: Fix MMC boot in OMAP4 xload configurations
 2012-02-28  8:57 UTC  (4+ messages)

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox