[PATCH] ARM pbl: add generated file zbarebox.map to .gitignore
2012-11-14 8:23 UTC (2+ messages)
[PATCH] replace barebox* in .gitignore with individual files
2012-11-14 8:21 UTC
defaultenv-2: how to update a flash partition?
2012-11-14 8:10 UTC (4+ messages)
[PATCH 1/1] phy: phy_update_status wait auto neg done when enabled
2012-11-14 8:05 UTC (2+ messages)
[PATCH 1/3] at91sam9: add detection of low power sdram
2012-11-13 21:13 UTC (3+ messages)
` [PATCH 2/3] usb-a9g20: add mmc spi support
` [PATCH 3/3] tny-a9g20: "
[PATCH 0/4] mci-spi fix
2012-11-13 20:07 UTC (5+ messages)
` [PATCH 1/4] mci_spi: always compute command crc byte
` [PATCH 2/4] mci-core: spi fix op cond support
` [PATCH 3/4] mci_spi: add sanity check
` [PATCH 4/4] mci_spi: add clock frequency change support
[PATCH 1/1] phylib: add fixup support
2012-11-13 18:00 UTC
[PATCH 0/8] atmtel: fix spi driver + rm9200
2012-11-13 14:45 UTC (11+ messages)
` [PATCH 1/8] atmel_spi: use device id as bus num
` [PATCH 2/8] atmel_spi: split transfert to atmel_spi_do_xfer
` [PATCH 3/8] atmel_spi: after setup the cs need to be disable
` [PATCH 4/8] atmel_spi: add sanity check in setup
` [PATCH 5/8] atmel_spi: fix cs support
` [PATCH 6/8] atmel_spi: drop setup during transfer
` [PATCH 7/8] atmel_spi: add cs change support
` [PATCH 8/8] at91rm9200: fix spi cs support
[PATCH] mci_spi: always compute command crc byte
2012-11-12 21:16 UTC
TX53: Not Bootable from next tree
2012-11-12 13:02 UTC (5+ messages)
[PATCH] omap3_spi: fix bus numbers according to omap3_add_spi[1-4]
2012-11-12 8:38 UTC (2+ messages)
[PATCH v3 1/2] commands: change Y-Modem implementation
2012-11-12 8:36 UTC (4+ messages)
` [PATCH v3 2/2] commands: remove old "
[PATCH 1/1] at91sam9x5ek: add at24c512 support
2012-11-12 7:43 UTC (2+ messages)
[PATCH 1/1] eth: register device a pure device
2012-11-12 7:42 UTC (2+ messages)
[PATCH 0/3] i2c fix + prepare for at24 support
2012-11-12 7:40 UTC (5+ messages)
` [PATCH 1/3] i2c: algo-bit add missing acknak
` [PATCH 2/3] i2c: introduce i2c_new_dummy
` [PATCH 3/3] i2c: add id_table support
[PATCH 0/3] i2c: add at24 eeprom support
2012-11-12 7:38 UTC (5+ messages)
` [PATCH 1/3] import log2 support from linux
` [PATCH 2/3] add roundup and rounddown support
` [PATCH 3/3] eeprom: add at24 support
[PATCH 1/1] at91rm9200ek: enable dt support
2012-11-12 7:33 UTC (2+ messages)
[PATCH 0/2 v4] add spi command
2012-11-12 7:32 UTC (4+ messages)
` [PATCH 1/2] spi: introduce spi_get_master
` [PATCH 2/2] introduce spi command
[PATCH] net smc911x: add support for external PHY
2012-11-12 7:30 UTC (2+ messages)
[PATCH] mdiobus: unbreak phy_device_connect(): honor masked out PHYs
2012-11-12 7:28 UTC (2+ messages)
[PATCH] make new y-modem (PATCH v2) work on big-endian CPU
2012-11-08 19:59 UTC (5+ messages)
[PATCH 0/2] Y-Modem implementation change
2012-11-07 8:22 UTC (19+ messages)
` [PATCH 1/2] commands: change Y-Modem implementation
` [PATCH 2/2] commands: remove old "
` [PATCH v2 1/2] commands: change "
` [PATCH v2 2/2] commands: remove old "
[PATCH] mdiobus: unbreak phy_device_connect() "scan all PHY addresses" feature
2012-11-07 8:05 UTC (2+ messages)
USB On PCM043?
2012-11-06 19:48 UTC (9+ messages)
` [RFC][PATCH] pcm043: usb support --not working--
TX53: Not Bootable from next tree
2012-11-05 13:27 UTC (3+ messages)
[PATCH 0/2 v3] add spi command
2012-11-05 9:36 UTC (3+ messages)
` [PATCH 1/2] spi: introduce spi_get_master
` [PATCH 2/2] introduce spi command
Ramfs and NULL pointer
2012-11-05 8:23 UTC (4+ messages)
[PATCH 1/1] atmel_spi: fix multiple instance support
2012-11-04 18:42 UTC
[PATCH 0/2 v2] add spi command
2012-11-04 8:59 UTC (3+ messages)
` [PATCH 1/2] spi: introduce spi_get_master
` [PATCH 2/2] introduce spi command
[PATCH 0/2] add spi command
2012-11-03 21:39 UTC (8+ messages)
` [PATCH 1/2] spi: introduce spi_get_master
` [PATCH 2/2] introduce spi command
[PATCH 0/2 v2] add bus device
2012-11-03 15:11 UTC (3+ messages)
` [PATCH 1/2] bus_for_each_device/bus_for_each_driver: add () to allow use &bus
` [PATCH 2/2] bus: add bus device
[PATCH 0/4 v3] at91sam9x5ek: add spi and mci support
2012-11-03 11:36 UTC (5+ messages)
` [PATCH 1/4] at91sam9x5: add spi support
` [PATCH 2/4] at91sam9x5ek: "
` [PATCH 3/4] at91sam9x5: add mci support
` [PATCH 4/4] at91sam9x5ek: "
[PATCH 0/7] at91 add i2c-gpio suport
2012-11-03 11:29 UTC (13+ messages)
` [PATCH 1/7] at91sam9x5: add i2c support
` [PATCH 2/7] at91rm9200: "
` [PATCH 3/7] at91sam9260/sam9g20: "
` [PATCH 4/7] at91sam9263: "
` [PATCH 5/7] at91sam9261/sam9g10: "
` [PATCH 6/7] at91sam9g45: "
` [PATCH 7/7] at91sam9x5ek: "
` [PATCH 1/1 v2] "
` [PATCH 1/1 v3] "
[PATCH 1/1] input: add qt1070 touch keyboard support
2012-11-03 11:26 UTC (5+ messages)
` [PATCH 1/1 v2] "
` [PATCH 1/1 v3] "
[PATCH v4 1/3] ARM: Add initial support for CLPS711X architecture
2012-11-02 10:35 UTC (6+ messages)
` [PATCH v4 2/3] ARM: clps711x: Add serial driver
` [PATCH v4 3/3] ARM: clps711x: Add generic board support (CLEP7212)
[For next PATCH 1/1] versatilepb: add i2c support
2012-11-02 10:30 UTC (2+ messages)
[PATCH 0/4 v2] i2c: add algo-bit support with gpio and versatile support
2012-11-02 10:27 UTC (6+ messages)
` [PATCH 1/4] i2c: adapter: register it's own device
` [PATCH 2/4] i2c: add i2c algo bit support
` [PATCH 3/4] i2c: add i2c-gpio support
` [PATCH 4/4] i2c: add versatile support
[PATCH 0/4 v2] at91sam9x5ek: add spi and mci support
2012-11-02 9:39 UTC (6+ messages)
` [PATCH 1/4] at91sam9x5: add spi support
` [PATCH 2/4] at91sam9x5ek: "
` [PATCH 3/4] at91sam9x5: add mci support
` [PATCH 4/4] at91sam9x5ek: "
[PATCH 0/4] i2c: add algo-bit support with gpio and versatile support
2012-11-02 9:24 UTC (7+ messages)
` [PATCH 1/4] i2c: adapter: register it's own device
` [PATCH 2/4] i2c: add i2c algo bit support
` [PATCH 3/4] i2c: add i2c-gpio support
` [PATCH 4/4] i2c: add versatile support
[PATCH v3 1/3] ARM: Add CLPS711X architecture
2012-11-02 9:06 UTC (9+ messages)
[PATCH 1/1] mtd: dataflash: fix spi_transfer init
2012-11-02 8:57 UTC (2+ messages)
[PATCH] defenv-2 menu: when booting failed wait for key press
2012-11-01 22:42 UTC
[PATCH 0/4] at91sam9x5ek: add spi and mci support
2012-11-01 19:36 UTC (5+ messages)
` [PATCH 1/4] at91sam9x5: add spi support
` [PATCH 2/4] at91sam9x5ek: "
` [PATCH 3/4] at91sam9x5: add mci support
` [PATCH 4/4] at91sam9x5ek: "
[PATCH] ARM: Make memory known to lowlevel code
2012-11-01 19:21 UTC (4+ messages)
` [PATCH 06/28] ARM i.MX boards: switch to barebox_arm_entry
[PATCH] defenv-2: Make it simpler
2012-11-01 18:52 UTC (4+ messages)
` [PATCH 1/3] defenv-2: remove initrd boot script
` [PATCH 2/3] defenv-2: remove some helper scripts
` [PATCH 3/3] defenv-2: bring back /env/config
[PATCH] mount: add compatibility to old mount command
2012-11-01 17:08 UTC
[PATCH] iomux-imx35: add missing comma in pad definition
2012-11-01 15:32 UTC (2+ messages)
[PATCH 0/4] at91sam9x5ek: add 1-wire support and hardware detection support
2012-11-01 15:30 UTC (2+ messages)
[PATCH 0/8 v3] pm9g45/pm9253/pm9261: add 1-wire support
2012-11-01 15:29 UTC (2+ messages)
[PATCH 1/1] at91sam9xek: fix mtd partition
2012-11-01 15:29 UTC (2+ messages)
[PATCH] command: return 1 on unknown command
2012-11-01 14:14 UTC
[PATCH] fix devicetree alignment
2012-11-01 11:49 UTC (3+ messages)
` [PATCH 1/2] bootm: Add a define for the additional devicetree size
` [PATCH 2/2] bootm: Do not cross 1MiB sections for the devicetree
[PATCH 0/2] m25p80: re-import it againt mtd_add_host
2012-11-01 9:33 UTC (4+ messages)
` [PATCH 1/1] mtd: introduce mtd_block_isbad
[PATCH] panda and beagle update
2012-11-01 7:55 UTC (5+ messages)
` [PATCH 2/6] ARM OMAP4 panda: switch to new environment
` [PATCH 3/6] ARM OMAP4 panda xload: Enable MMU and Thumb2 support
` [PATCH 4/6] ARM OMAP3 beagle: switch to new environment
` [PATCH 5/6] ARM OMAP3 boards: Call omap3_core_init only from SRAM
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox