can barebox running on mini6410 boot from nand?
2013-04-07 9:16 UTC
[PATCH 1/2] ARM: i.MX: Update MX2x iomux definitions
2013-04-07 8:48 UTC (2+ messages)
` [PATCH 2/2] ARM: i.MX: Update MX51 "
[PATCH 1/1] highbank: switch to defaultenv-2
2013-04-06 16:31 UTC
[PATCH] ArchosG9: add keyboard input and new reset menu entries (v3)
2013-04-05 22:25 UTC (2+ messages)
` [PATCH] OMAP4: add command to select next boot device priority
[PATCH v2 1/2] Makefile: Create empty <config.h> if this header file is not needed by board
2013-04-05 14:43 UTC (2+ messages)
` [PATCH v2 2/2] Remove unused config.h
[PATCH] ARM/MXS: add more ROM code related documentation
2013-04-05 12:04 UTC
[PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board
2013-04-05 10:37 UTC (7+ messages)
` Re[2]: "
[PATCH 1/1] lib: import kstrtox from the kernel 3.8
2013-04-05 9:05 UTC (2+ messages)
[PATCH] omap4-fb: add driver
2013-04-05 8:59 UTC (2+ messages)
Omap4 DSS clocks
2013-04-05 6:39 UTC (9+ messages)
` Re[3]: "
` Re[5]: "
` Re[7]: "
` [PATCH] [RFC] ARM OMAP4: enable DSS by default
` Re[2]: "
(no subject)
2013-04-04 20:43 UTC (16+ messages)
` [PATCH v3 01/10] tegra: pull in iomap.h from the Linux kernel
` [PATCH v3 02/10] tegra: define TEGRA20 arch type
` [PATCH v3 03/10] tegra: switch to DT only
` [PATCH v3 04/10] tegra: add driver for the clock and reset module
` [PATCH v3 05/10] tegra: add T20 timer driver
` [PATCH v3 06/10] tegra: add T20 power management controller driver
` [PATCH v3 07/10] tegra: add common lowlevel startup
` [PATCH v3 08/10] tegra: add generic debug UART support
` [PATCH v3 09/10] tegra: add generic meminit
` [PATCH v3 10/10] tegra: add GPIO controller driver
v2013.04.0
2013-04-04 8:49 UTC
[PATCH] ARM omap: add omap4_get_sysclk()
2013-04-04 6:42 UTC
[PATCH] dtc: add .gitignore for generated files
2013-04-03 12:19 UTC (2+ messages)
[PATCH v2] bootsource
2013-04-03 8:12 UTC (8+ messages)
` [PATCH v2 1/7] ARM: i.MX: rename barebox_loc to bootsource
` [PATCH v2 2/7] bootsource: create arch independent bootsource framework
` [PATCH v2 3/7] bootsource: use initcall to export bootsource location to environment
` [PATCH v2 4/7] bootsource: add support for bootsource instance information
` [PATCH v2 5/7] bootsource: add definition for i2c-eeprom, spi-nor, spi-eeprom and usb
` [PATCH v2 6/7] ARM: i.MX53: Add bootsource instance information
` [PATCH v2 7/7] ARM: mxs: add bootsource detection
[PATCH] bootsource
2013-04-03 8:04 UTC (7+ messages)
` [PATCH 1/5] ARM: i.MX: rename barebox_loc to bootsource
` [PATCH 2/5] bootsource: create arch independent bootsource framework
` [PATCH 3/5] bootsource: use initcall to export bootsource location to environment
` [PATCH 4/5] bootsource: add support for bootsource instance information
` [PATCH 5/5] ARM: i.MX53: Add "
[PATCH 0/3] ARM: zynq: add support for ethernet
2013-04-03 7:55 UTC (4+ messages)
` [PATCH 1/3] net: macb: turn off endian_swp_pkt_en
` [PATCH 2/3] ARM: zynq: add support for ethernet
` [PATCH 3/3] ARM: zedboard: add ethernet device
[PATCH] ARM: zynq: fix zynq_clks enum
2013-04-03 7:48 UTC
[RFCv2 PATCH 1/2] OMAP: Move bootsource functions
2013-04-03 7:22 UTC (3+ messages)
` [RFCv2 PATCH 2/2] OMAP: Add option to use environment from MMC
[PATCH 1/2] mci-core: use dev_* for messages
2013-04-03 7:13 UTC (3+ messages)
` [PATCH 2/2] mci-core: fix coding style
[PATCH] commands/tftp: use pr_debug for debug output
2013-04-03 7:11 UTC (6+ messages)
` [PATCH v2] commands/tftp: use debug() "
[PATCH] i.MX53 lowlevel work
2013-04-03 7:09 UTC (5+ messages)
` [PATCH 1/4] ARM: i.MX53: Fix pll216 setup
` [PATCH 2/4] ARM: i.MX53: split lowlevel function into early/nonearly version
` [PATCH 3/4] ARM: tx53: use early lowlevel function
` [PATCH 4/4] ARM: tqma53: call SoC lowlevel function early
[PATCH] ARM: tqma53: change uart to second uart
2013-04-03 6:59 UTC
Problems with the Load a new kernel image
2013-04-02 8:39 UTC (2+ messages)
IXP4xx again
2013-04-02 7:20 UTC (12+ messages)
` [PATCH] ARM: XScale processors don't support "clean+invalidate D entry" operation
` [PATCH] Implement ALTERNATE memory layout
` Re[2]: "
` [PATCH] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform
[PATCH] fb: calculate resource end
2013-04-02 7:08 UTC (2+ messages)
[PATCH] macb: rename platform data
2013-04-02 6:29 UTC (7+ messages)
` [PATCH RESEND] parameter: fix build warning when !CONFIG_PARAMETER
[PATCH] ARM: sabresd: move config-board out of /env/init
2013-03-30 10:40 UTC (2+ messages)
[PATCH v2] cfa10036: Retrieve the RAM size at runtime
2013-03-30 10:39 UTC (3+ messages)
[PATCH v4 0/5] ARM: add support for Zynq
2013-03-27 8:32 UTC (16+ messages)
` [PATCH v3 1/5] serial: Add driver for Cadence UART
` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq
` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
` [PATCH v3 4/5] ARM: zynq: add zynq fsbl checksum script
` [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard
[RFC PATCH 1/2] OMAP: Move bootsource functions
2013-03-27 8:10 UTC (4+ messages)
` [RFC PATCH 2/2] OMAP: Add option to use enviroment from MMC
[PATCH] ubiformat: get buffer from malloc
2013-03-27 8:04 UTC (5+ messages)
[help] Calculation of size for nor_parts
2013-03-27 7:39 UTC (3+ messages)
[PATCH 1/2] of/net: Add net related of helpers
2013-03-26 9:15 UTC (2+ messages)
` [PATCH 2/2] net: fec: probe phy_mode from devicetree
[PATCH] clk: remove unused __clk_[get|put]
2013-03-25 14:31 UTC
[PATCH 0/6] ArchosG9: add keyboard input and new reset menu entries (v2)
2013-03-25 13:56 UTC (10+ messages)
` [PATCH 1/6] OMAP4: check for usb availability at device registration
` [PATCH 2/6] ArchosG9: zero all features before setting them
` [PATCH 3/6] gpio_keys: detect keys pressed before booting
` [PATCH 4/6] OMAP4: add command to select next boot device priority
` [PATCH 5/6] ArchosG9: add keyboard input and new reset menu entries
` [PATCH 6/6] menu: avoid errors when building submenus
[PATCH v3 0/5] ARM: add support for Zynq
2013-03-25 13:02 UTC (6+ messages)
` [PATCH v3 1/5] serial: Add driver for Cadence UART
` [PATCH v3 2/5] ARM: zynq: Add new architecture zynq
` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script
` [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard
[PATCH] cfa10036: Retrieve the RAM size at runtime
2013-03-25 13:02 UTC (5+ messages)
[PATCH] [ARM] imx1: add #define to configure frequency for the clk32
2013-03-25 12:43 UTC (4+ messages)
[PATCH v2 0/5] ARM: add support for Zynq
2013-03-19 15:28 UTC (20+ messages)
` [PATCH v2 1/5] serial: Add driver for Cadence UART
` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq
` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000
` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script
` [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard
[PATCH] clk: Add is_enabled callback
2013-03-19 10:36 UTC (3+ messages)
/me on vacation
2013-03-15 22:02 UTC
Video card photo Supply与您共享了相册。
2013-03-15 19:21 UTC
[PATCH RESEND] usb: chipidea-imx: Fix usb initialization
2013-03-15 19:06 UTC (2+ messages)
[RFC 1/3] clk: Remove unneded private "parent" fields
2013-03-15 8:52 UTC (5+ messages)
` [RFC 2/3] clk: Using the "is_enabled" to determine the clock state
` Re[2]: [RFC 1/3] clk: Remove unneded private "parent" fields
[PATCH 0/7 v2] globalvar: add multiple device support
2013-03-15 8:12 UTC (2+ messages)
[PATCH] ARM: Add CPU detection macros for ARM720
2013-03-15 7:27 UTC (2+ messages)
[PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2
2013-03-15 7:27 UTC (2+ messages)
[PATCH 8/9] archos: add atag appender for all features
2013-03-15 7:25 UTC (2+ messages)
[PATCH 1/1] defaultenv-2: move settings in a submenu
2013-03-15 7:24 UTC (2+ messages)
[RFC PATCH 1/2] AM33XX: Move muxing defines to header file
2013-03-15 7:23 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox